Intel® Quartus® Prime Pro Edition User Guide: Timing Analyzer

Download PDF
ID 683243
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Answers to Top FAQs 2. Timing Analysis Introduction 3. Using the Intel® Quartus® Prime Timing Analyzer A. Intel® Quartus® Prime Pro Edition User Guides
2. Timing Analysis Introduction x
2.1. What's New In This Version 2.2. Timing Analysis Basic Concepts 2.3. Timing Analysis Overview Document Revision History
2.2. Timing Analysis Basic Concepts x
2.2.1. Timing Path and Clock Analysis 2.2.2. Clock Setup Analysis 2.2.3. Clock Hold Analysis 2.2.4. Recovery and Removal Analysis 2.2.5. Multicycle Path Analysis 2.2.6. Metastability Analysis 2.2.7. Timing Pessimism 2.2.8. Clock-As-Data Analysis 2.2.9. Multicorner Timing Analysis 2.2.10. Time Borrowing
2.2.1. Timing Path and Clock Analysis x
2.2.1.1. The Timing Netlist 2.2.1.2. Timing Paths 2.2.1.3. Data and Clock Arrival Times 2.2.1.4. Launch and Latch Edges
2.2.5. Multicycle Path Analysis x
2.2.5.1. Multicycle Clock Hold 2.2.5.2. Multicycle Clock Setup
2.2.10. Time Borrowing x
2.2.10.1. Time Borrowing Limitations 2.2.10.2. Time Borrowing with Latches
3. Using the Intel® Quartus® Prime Timing Analyzer x
3.1. Timing Analysis Flow 3.2. Step 1: Specify Timing Analyzer Settings 3.3. Step 2: Specify Timing Constraints 3.4. Step 3: Run the Timing Analyzer 3.5. Step 4: Analyze Timing Reports 3.6. Applying Timing Constraints 3.7. Timing Analyzer Tcl Commands 3.8. Timing Analysis of Imported Compilation Results 3.9. Using the Intel® Quartus® Prime Timing Analyzer Document Revision History 3.10. Intel® Quartus® Prime Pro Edition User Guide: Timing Analyzer Archive
3.4. Step 3: Run the Timing Analyzer x
3.4.1. Setting the Operating Conditions for Timing Analysis 3.4.2. Enabling Time Borrowing Optimization 3.4.3. Promoting Critical Warnings to Errors
3.5. Step 4: Analyze Timing Reports x
3.5.1. Generating Timing Reports 3.5.2. Cross-Probing with Design Assistant 3.5.3. Launching Design Assistant from Timing Analyzer 3.5.4. Locating Timing Paths in Other Tools 3.5.5. Correlating Constraints to the Timing Report
3.5.1. Generating Timing Reports x
3.5.1.1. Report Fmax Summary 3.5.1.2. Report Timing 3.5.1.3. Report Timing By Source Files 3.5.1.4. Report Data Delay 3.5.1.5. Report Net Delay 3.5.1.6. Report Clocks and Clock Network 3.5.1.7. Report Clock Transfers 3.5.1.8. Report Metastability 3.5.1.9. Report CDC Viewer 3.5.1.10. Report Asynchronous CDC 3.5.1.11. Report Logic Depth 3.5.1.12. Report Neighbor Paths 3.5.1.13. Report Register Spread 3.5.1.14. Report Route Net of Interest 3.5.1.15. Report Retiming Restrictions 3.5.1.16. Report Register Statistics 3.5.1.17. Report Pipelining Information 3.5.1.18. Report Time Borrowing Data 3.5.1.19. Report Exceptions and Exceptions Reachability 3.5.1.20. Report Bottlenecks
3.5.1.13. Report Register Spread x
3.5.1.13.1. Registers with High Timing Path Endpoint Tension 3.5.1.13.2. Registers with High Immediate Fan-Out Tension
3.5.1.20. Report Bottlenecks x
3.5.1.20.1. Specifying Custom Bottleneck Criteria
3.5.2. Cross-Probing with Design Assistant x
3.5.2.1. Cross-Probing from Design Assistant to Timing Analyzer
3.6. Applying Timing Constraints x
3.6.1. Recommended Initial SDC Constraints 3.6.2. SDC File Precedence 3.6.3. Modifying Iterative Constraints 3.6.4. Using Entity-bound SDC Files 3.6.5. Creating Clocks and Clock Constraints 3.6.6. Creating I/O Constraints 3.6.7. Creating Delay and Skew Constraints 3.6.8. Creating Timing Exceptions 3.6.9. Using Fitter Overconstraints 3.6.10. Example Circuit and SDC File
3.6.1. Recommended Initial SDC Constraints x
3.6.1.1. Create Clock (create_clock) 3.6.1.2. Derive PLL Clocks (derive_pll_clocks) 3.6.1.3. Derive Clock Uncertainty (derive_clock_uncertainty) 3.6.1.4. Set Clock Groups (set_clock_groups)
3.6.4. Using Entity-bound SDC Files x
3.6.4.1. Entity-bound Constraint Scope 3.6.4.2. Entity-bound Constraint Examples
3.6.5. Creating Clocks and Clock Constraints x
3.6.5.1. Creating Base Clocks 3.6.5.2. Creating Virtual Clocks 3.6.5.3. Creating Generated Clocks (create_generated_clock) 3.6.5.4. Deriving PLL Clocks 3.6.5.5. Creating Clock Groups (set_clock_groups) 3.6.5.6. Accounting for Clock Effect Characteristics 3.6.5.7. Constraining CDC Paths
3.6.5.1. Creating Base Clocks x
3.6.5.1.1. Automatic Clock Detection and Constraint Creation
3.6.5.2. Creating Virtual Clocks x
3.6.5.2.1. Specifying I/O Interface Uncertainty 3.6.5.2.2. I/O Interface Clock Uncertainty Example
3.6.5.3. Creating Generated Clocks (create_generated_clock) x
3.6.5.3.1. Clock Divider Example (-divide_by) 3.6.5.3.2. Clock Multiplexer Example
3.6.5.5. Creating Clock Groups (set_clock_groups) x
3.6.5.5.1. Exclusive Clock Groups (-logically_exclusive or -physically_exclusive) 3.6.5.5.2. Asynchronous Clock Groups (-asynchronous) 3.6.5.5.3. set_clock_groups Constraint Tips
3.6.5.6. Accounting for Clock Effect Characteristics x
3.6.5.6.1. Set Clock Latency (set_clock_latency) 3.6.5.6.2. Clock Uncertainty
3.6.6. Creating I/O Constraints x
3.6.6.1. Input Constraints (set_input_delay) 3.6.6.2. Output Constraints (set_output_delay)
3.6.7. Creating Delay and Skew Constraints x
3.6.7.1. Advanced I/O Timing and Board Trace Model Delay 3.6.7.2. Maximum Skew (set_max_skew) 3.6.7.3. Net Delay (set_net_delay)
3.6.8. Creating Timing Exceptions x
3.6.8.1. Timing Exception Precedence Precedence example 3.6.8.2. False Paths (set_false_path) 3.6.8.3. Minimum and Maximum Delays 3.6.8.4. Multicycle Paths 3.6.8.5. Multicycle Exception Examples 3.6.8.6. Delay Annotation 3.6.8.7. Constraining Design Partition Ports
3.6.8.4. Multicycle Paths x
3.6.8.4.1. Common Multicycle Applications 3.6.8.4.2. Relaxing Setup with Multicycle (set_multicyle_path) 3.6.8.4.3. Accounting for a Phase Shift (-phase)
3.6.8.5. Multicycle Exception Examples x
3.6.8.5.1. Default Multicycle Analysis 3.6.8.5.2. End Multicycle Setup = 2 and End Multicycle Hold = 0 3.6.8.5.3. End Multicycle Setup = 2 and End Multicycle Hold = 1 3.6.8.5.4. Same Frequency Clocks with Destination Clock Offset 3.6.8.5.5. Destination Clock Frequency is a Multiple of the Source Clock Frequency 3.6.8.5.6. Destination Clock Frequency is a Multiple of the Source Clock Frequency with an Offset 3.6.8.5.7. Source Clock Frequency is a Multiple of the Destination Clock Frequency 3.6.8.5.8. Source Clock Frequency is a Multiple of the Destination Clock Frequency with an Offset
3.7. Timing Analyzer Tcl Commands x
3.7.1. The quartus_sta Executable 3.7.2. Collection Commands
3.7.2. Collection Commands x
3.7.2.1. Wildcard Characters 3.7.2.2. Adding and Removing Collection Items 3.7.2.3. Query of Collections 3.7.2.4. Using the get_pins Command
1. Answers to Top FAQs
2. Timing Analysis Introduction
3. Using the Intel® Quartus® Prime Timing Analyzer
A. Intel® Quartus® Prime Pro Edition User Guides

3.6.8.1. Timing Exception Precedence

If the same clock or node names occur in multiple timing exceptions, the Timing Analyzer observes the following order of timing exception precedence:
  1. Set False Path (set_false_path) is the first priority. False paths and clock groups have identical priority, except when you use the -latency_insensitive or -no_synchronizer options with a false path exception. With either option, the false path has priority over a clock group.
  2. Set Clock Groups (set_clock_groups) is the second priority.
  3. Set Minimum Delay (set_min_delay) and Set Maximum Delay (set_max_delay) are the third priority.
  4. Set Multicycle Path (set_multicycle_path) is the fourth priority.
The false path timing exception has the highest precedence. Within each category, assignments to individual nodes have precedence over assignments to clocks. For exceptions of the same type:
  1. -from <node> is the first priority.
  2. -to <node> is the second priority.
  3. -thru <node> is the third priority.
  4. -from <clock> is the fourth priority.
  5. -to <clock> is the fifth priority.
An asterisk wildcard (*) for any of these options applies the same precedence as not specifying the option at all. For example, -from a -to * is treated identically to -from a with regards precedence.

Precedence example

  1. set_max_delay 1 -from x -to y
  2. set_max_delay 2 -from x
  3. set_max_delay 3 -to y

The first exception has higher priority than either of the other two, since the first exception specifies a -from (while #3 doesn't) and specifies a -to (while #2 doesn't). In the absence of the first exception, the second exception has higher priority than the third, since the second exception specifies a -from, which the third does not. Finally, the remaining order of precedence for additional exceptions is order-dependent, such that the assignments most recently created overwrite, or partially overwrite, earlier assignments.

The set_net_delay, set_max_skew, and set_data_delay constraints analyze independently of minimum or maximum delays, or multicycle path constraints.
  • The set_net_delay exception applies regardless of the existence of a set_false_path exception, or set_clock_groups exception, or other path-based constraint or exception. It is a net-based exception, and net-based and path-based exceptions are applied independently of each other.
  • The set_max_skew exception applies on paths cut by an asynchronous clock group, and regardless of any set_false_path exception. Exclusive clock groups override max skew exceptions, because paths between exclusive clocks are entirely inactive and should not be analyzed for timing or skew requirements. This precedence allows you to define more targeted constraints on asynchronous CDC bus transfers.
  • The set_data_delay exception specifies a maximum datapath delay exception for a given path. Exclusive clock groups override data delay exceptions, because paths between exclusive clocks are entirely inactive and should not be analyzed for timing or data delay requirements. Asynchronous clock groups do not override data delay exceptions. False path exceptions override data delay exceptions in the Intel Quartus Prime Pro software version 21.2 and earlier. Beginning in version 21.3, false path exceptions do not override data delay exceptions. This change in precedence allows you to write more targeted constraints on asynchronous CDC bus transfers.
Related Information
Level Two Title