2024.07.15 |
2.2.0 |
24.1 |
Corrected Uplink U-Plane On Time Example 1 figure numbers |
2024.05.15 |
2.2.0 |
24.1 |
- Updated Nios II to Nios V processor.
- Added transmission window monitor bypass for SRS packets
- Corrected occurrences of ta2 to t2a.
- Added O-RAN Mode parameter
|
2024.02.01 |
2.1.0 |
23.4 |
- Added support for Agilex™ 5 and Agilex™ 9 devices
- Added Fragmentation Supported Number of eAxC Channel(s) parameter
- Updated O-RAN IP Fragmentation for sequence ID per eAxC ID support:
- Changed "... starts with a raw packet value on first fragment" to "... starts with zero on first fragment"
- Updated Fragmentation table description and values
|
2023.11.27 |
2.0.0 |
23.3 |
- Added support for all section extension types
- Added application layer fragmentation for U-plane and C-plane
- Added Enable 30 kHz subcarrier spacing parameter
- Removed Programmable U-Plane Fragmentation Size (Number of PRBs) and Programmable C-Plane Fragmentation Size (Number of Bytes) parameters.
- Updated Transmission Window for long PRACH, short PRACH, and PUSCH support
- Added ext_scs_sel to Application Interface Transmitter User Plane Signals
- Added rx_c_numberofSections, rx_c_symInc to Application Interface Receiver Control Plane Signals
- Corrected reset_tx_n and reset_rx_n to rst_tx_n and rst_rx_n in O-RAN Reset Transactions
- Updated O-RAN IP Fragmentation for handling by Ethernet frame size
- Added O-RAN IP U-Plane Packet Size
- Added description to O-RAN IP Regsiters
|
2023.08.23 |
1.9.2 |
23.2 |
No changes |
2023.08.15 |
1.9.1 |
23.1 |
- Added "the O-RAN Design Example does not support window monitoring or application layer fragmentation" to
- Parameterizing the O-RAN IP
- O-RAN IP Parameters
- O-RAN IP Fragmentation
- Added "the O-RAN Design Example does not support window monitoring" to
- O-RAN IP Functional Description
- O-RAN IP Transmission and Reception Window Threshold
- Added "the O-RAN Design Example does not C-plane fragmentation" and "the O-RAN Design Example does not U-plane fragmentation" to
- Added "the O-RAN Design Example does not support application layer fragmentation" to
|
2023.05.04 |
1.9.1 |
23.1 |
- Updated the product family name to "Intel Agilex 7."
- Added O-RAN IP Examples for Transmission and Reception Window Thresholds
|
2023.03.01 |
1.9.0 |
22.4 |
- Added more information on compression ratio of 16.
- Added C- and U-plane fragmentation parameters
- Added O-RAN IP Fragmentation
- Added functional_mode Register to O-RAN IP Registers
|
2023.01.24 |
1.6.0 |
21.4 |
- Corrected reset signal names to rst_csr_n, rst_rx_n, and rst_tx_n
- Deleted avst_source_error from Transmitter Signals
- Deleted avst_sink_ready from Receiver Signals
- Corrected rx_seq_id to rx_u_seq_idin User Plane Signals
|
2023.01.10 |
1.6.0 |
21.4 |
Corrected t2a and Ta3 examples in O-RAN IP Transmission and Reception Window Threshold |
2022.11.30 |
1.6.0 |
21.4 |
- Corrected the following timing diagrams:
- Application Transmitter Interface Control Plane Timing Diagram avst_sink_c_ext_endofpacket and avst_sink_c_ext_endofpacket signals
- Application Interface Receiver Control Plane Timing Diagram avst_source_c_ext_endofpacket and avst_source_c_ext_endofpacket signals and all avst_sink instances to avst_source
- Application Interface Receiver User Plane Timing Diagram avst_source_u_error changed to low and deleted avst_source_u_ready signals
- Corrected rx_ext_sectionType to output in Control Plane Signals table
- In User plane signals table
- Changed avst_sink_u_startofpacket to avst_source_u_startofpacket
- avst_sink_u_valid to avst_source_u_valid
- Changed description of avst_source_u_data
- Changed description of rx_sec_hdr_valid
|
2022.07.08 |
1.6.0 |
21.4 |
- Added various references to the O-RAN IP Design Example User Guide to clarify design example specific parameters.
- Removed mention of C_Sectiontype and C_NumberofSections,in Application Transmitter Interface Control Plane Timing Diagram and Transport Transmitter Interface Timing Diagram, as they are design example paramters.
- Corrected timing diargam signal names
|
2022.06.20 |
1.6.0 |
21.4 |
- Corrected Application Interface Receiver Control Plane Timing Diagram
- Changed support for CAT-A RU (up to 16 spatial streams) from 8 to 16
|
2022.04.06 |
1.6.0 |
21.4 |
- Changed tx_u_numPrb to 1 from 129 in Application Interface Transmitter User Plane Timing Diagram.
- Changed rx_u_numPrb to 1 from 129 in Application Interface Receiver User Plane Timing Diagram.
- Changed tx_c_sectiontype to 1 from 0 in C-plane packet waveform
- Removed avst_source_c_ready avst_source_c_ext_ready from Control Plane Signals.
- Removed avst_source_u_ready from User Plane Signals.
|
|
|
|
|
2022.03.04 |
1.6.0 |
21.4 |
- Added Device Supported Speed Grades table
- Changed two parameters:
- Block-floating point compression
- Mu-law compression
- Corrected signal rx_rf to rx_ef.
- Swapped following signal descriptions:
- avst_sink_u_data and avst_source_data.
- avst_sink_data and avst_source_u_data
- Corrected tx_size value in U-plane packet waveform figure
- Corrected description of tx_lanes_stable and rx_pcs_ready
- Removed invalid numPrb for U-plane data in Error Handling table
|
2021.12.17 |
1.5.1 |
21.3 |
- Updated performance and resources
- Added legal range for number of sections
- Added more description to Maximum Ethernet frame size parameter
|
2021.11.03 |
1.5.1 |
21.2 |
- Corrected Reception Window figure
|
2021.09.15 |
1.5.1 |
21.2 |
- Corrected readyLatency in Receiver Signals table
|
2021.08.11 |
1.4.0 |
21.1 |
- Corrected csr_read in CSR Signals table
|
2021.06.17 |
1.4.0 |
21.1 |
- Corrected readyLatency in Transmitter Signals table
|
2021.06.10 |
1.4.0 |
21.1 |
- Added support for F-tile devices
- Moved rx_sec_hdr_valid signal from control plane to user plane table
|
2021.04.22 |
1.3.0 |
20.4 |
- Added more signals to C-plane packet waveform
- Updated tx_total_low, tx_total_high, tx_total_c_low, and tx_total_c_high register addresses
|
2021.03.20 |
1.3.0 |
20.4 |
Added:
- New registers.
- Performance Counters
- O-RAN IP Transmission and Reception Window Threshold
- Support for section extensions.
- Compression ratios of 8, 9, 10, 11, 12, 13, 14, 15, 16.
- Section type 3
|
2021.01.25 |
1.0.0 |
20.2 |
- Changed product ordering code.
|
2020.09.04 |
1.0.0 |
20.2 |
Initial release. |