Visible to Intel only — GUID: jxh1575602947687
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Arria® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example (Support FRL = 0)
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Arria® 10 FPGA IP Design Example User Guide Archives
6. Revision History for HDMI Arria® 10 FPGA IP Design Example User Guide
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.2. Creating RX-Only or TX-Only Designs
2.3. Hardware and Software Requirements
2.4. Directory Structure
2.5. Design Components
2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
2.7. Design Software Flow
2.8. Running the Design in Different FRL Rates
2.9. Clocking Scheme
2.10. Interface Signals
2.11. Design RTL Parameters
2.12. Hardware Setup
2.13. Simulation Testbench
2.14. Design Limitations
2.15. Debugging Features
2.16. Upgrading Your Design
3.1. HDMI 2.0 RX-TX Retransmit Design Block Diagram
3.2. Hardware and Software Requirements
3.3. Directory Structure
3.4. Design Components
3.5. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering
3.6. Clocking Scheme
3.7. Interface Signals
3.8. Design RTL Parameters
3.9. Hardware Setup
3.10. Simulation Testbench
3.11. Upgrading Your Design
Visible to Intel only — GUID: jxh1575602947687
Ixiasoft
2.14. Design Limitations
You need to consider some limitations when instantiating the HDMI 2.1 design example.
- TX is unable to operate in TMDS mode when in non-passthrough mode. To test in TMDS mode, toggle the user_dipsw switch back to passthrough mode.
- The Nios® V processor must serve the TX link training to completion without any interruption from other processes.