HDMI Arria® 10 FPGA IP Design Example User Guide

Download PDF
ID 683156
Date 4/29/2024
Public
Document Table of Contents
Document Table of Contents x
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Arria® 10 Devices 2. HDMI 2.1 Design Example (Support FRL = 1) 3. HDMI 2.0 Design Example (Support FRL = 0) 4. HDCP Over HDMI 2.0/2.1 Design Example 5. HDMI Arria® 10 FPGA IP Design Example User Guide Archives 6. Revision History for HDMI Arria® 10 FPGA IP Design Example User Guide
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Arria® 10 Devices x
1.1. Generating the Design 1.2. Simulating the Design 1.3. Compiling and Testing the Design 1.4. HDMI Intel® FPGA IP Design Example Parameters
2. HDMI 2.1 Design Example (Support FRL = 1) x
2.1. HDMI 2.1 RX-TX Retransmit Design Block Diagram 2.2. Creating RX-Only or TX-Only Designs 2.3. Hardware and Software Requirements 2.4. Directory Structure 2.5. Design Components 2.6. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering 2.7. Design Software Flow 2.8. Running the Design in Different FRL Rates 2.9. Clocking Scheme 2.10. Interface Signals 2.11. Design RTL Parameters 2.12. Hardware Setup 2.13. Simulation Testbench 2.14. Design Limitations 2.15. Debugging Features 2.16. Upgrading Your Design
2.5. Design Components x
2.5.1. HDMI TX Components 2.5.2. HDMI RX Components 2.5.3. Top-Level Common Blocks
2.15. Debugging Features x
2.15.1. Software Debugging Message 2.15.2. SCDC Information from the Sink Connected to TX 2.15.3. Clock Frequency Measurement
3. HDMI 2.0 Design Example (Support FRL = 0) x
3.1. HDMI 2.0 RX-TX Retransmit Design Block Diagram 3.2. Hardware and Software Requirements 3.3. Directory Structure 3.4. Design Components 3.5. Dynamic Range and Mastering (HDR) InfoFrame Insertion and Filtering 3.6. Clocking Scheme 3.7. Interface Signals 3.8. Design RTL Parameters 3.9. Hardware Setup 3.10. Simulation Testbench 3.11. Upgrading Your Design
4. HDCP Over HDMI 2.0/2.1 Design Example x
4.1. High-bandwidth Digital Content Protection (HDCP) 4.2. Nios® V Processor Software Flow 4.3. Design Walkthrough 4.4. Protection of Encryption Key Embedded in FPGA Design 4.5. Security Considerations 4.6. Debug Guidelines
4.1. High-bandwidth Digital Content Protection (HDCP) x
4.1.1. HDCP Over HDMI Design Example Architecture
4.3. Design Walkthrough x
4.3.1. Setting Up the Hardware 4.3.2. Generating the Design 4.3.3. Including HDCP Production Keys 4.3.4. Compiling the Design 4.3.5. Viewing the Results
4.3.3. Including HDCP Production Keys x
4.3.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) 4.3.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1)
4.3.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) x
4.3.3.1.1. HDCP Key Mapping from DCP Key Files 4.3.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 4.3.3.1.3. hdcp2x_rx_kmem.v file 4.3.3.1.4. hdcp2x_tx_kmem.v file
4.3.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1) x
4.3.3.2.1. Intel KEYENC 4.3.3.2.2. Key Programmer
4.3.5. Viewing the Results x
4.3.5.1. Push Buttons and LED Functions
4.6. Debug Guidelines x
4.6.1. HDCP Status Signals 4.6.2. Modifying HDCP Software Parameters 4.6.3. Frequently Asked Questions (FAQ)
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Arria® 10 Devices
2. HDMI 2.1 Design Example (Support FRL = 1)
3. HDMI 2.0 Design Example (Support FRL = 0)
4. HDCP Over HDMI 2.0/2.1 Design Example
5. HDMI Arria® 10 FPGA IP Design Example User Guide Archives
6. Revision History for HDMI Arria® 10 FPGA IP Design Example User Guide

4.6.2. Modifying HDCP Software Parameters

To facilitate the HDCP debugging process, you can modify the parameters in hdcp.c. The table below summarizes the list of configurable parameters and their functions.

Parameter Function
SUPPORT_HDCP1X Enable HDCP 1.4 on TX side
SUPPORT_HDCP2X Enable HDCP 2.3 on TX side
DEBUG_MODE_HDCP Enable debug messages for TX HDCP
REPEATER_MODE Enable repeater mode for HDCP design example

To modify the parameters, change the values to the desired values in hdcp.c. Before starting the compilation, make the following change in the build_sw_hdcp.sh:

  1. Locate the following line and comment it out to prevent the modified software file being replaced by the original files from the Quartus® Prime Software installation path.
  2. Run “./build_sw_hdcp.sh” to compile the updated software.
  3. The generated .elf file can be included into the design through two methods:
    1. Run “niosv-download -g <elf file name>”. Reset the system after the downloading process is completed to ensure proper functionality.
    2. Run “quartus_cdb –-update_mif” to update the memory initialization files. Run assembler to generate new .sof file which includes the updated software.
Level Two Title