AN 802: Intel® Stratix® 10 SoC Device Design Guidelines

Download PDF
ID 683117
Date 8/05/2021
Public
Document Table of Contents
Document Table of Contents x
1. Introduction to the Intel® Stratix® 10 SoC Device Design Guidelines 2. Board Design Guidelines for Stratix 10 SoC FPGAs 3. Interfacing to the FPGA for Stratix 10 SoC FPGAs 4. System Considerations for Stratix 10 SoC FPGAs 5. Embedded Software Design Guidelines for Intel® Stratix® 10 SoC FPGAs 6. Recommended Resources for Stratix 10 SoC FPGAs
1. Introduction to the Intel® Stratix® 10 SoC Device Design Guidelines x
1.1. Introduction to the Stratix 10 SoC Device Design Guidelines Revision History
2. Board Design Guidelines for Stratix 10 SoC FPGAs x
2.1. Pin Connection Considerations for Board Design 2.2. HPS Clocking and Reset Design Considerations 2.3. Design Considerations for Connecting Device I/O to HPS Peripherals and Memory 2.4. Design Guidelines for HPS Interfaces 2.5. HPS EMIF Design Considerations 2.6. HPS Memory Debug 2.7. Boundary Scan for HPS 2.8. Embedded Software Debugging and Trace 2.9. Board Design Guidelines for Intel® Stratix® 10 SoC FPGAs Revision History
2.1. Pin Connection Considerations for Board Design x
2.1.1. Board-Related Intel® Quartus® Prime Settings
2.1.1. Board-Related Intel® Quartus® Prime Settings x
2.1.1.1. Unused Pins
2.2. HPS Clocking and Reset Design Considerations x
2.2.1. HPS Clock Planning 2.2.2. Early Pin Planning and I/O Assignment Analysis 2.2.3. Pin Features and Connections for HPS Clocks, Reset and PoR 2.2.4. Direct to Factory Pin Support for Remote System Update (RSU) Feature 2.2.5. Internal Clocks 2.2.6. HPS Peripheral Reset Management
2.3. Design Considerations for Connecting Device I/O to HPS Peripherals and Memory x
2.3.1. HPS Pin Multiplexing Design Considerations 2.3.2. HPS I/O Settings: Constraints and Drive Strengths
2.4. Design Guidelines for HPS Interfaces x
2.4.1. HPS EMAC PHY Interfaces 2.4.2. USB Interface Design Guidelines 2.4.3. SD/MMC and eMMC Card Interface Design Guidelines 2.4.4. Design Guidelines for Flash Interfaces 2.4.5. UART Interface Design Guidelines 2.4.6. I2C Interface Design Guidelines
2.4.1. HPS EMAC PHY Interfaces x
2.4.1.1. PHY Interfaces 2.4.1.2. PHY Interfaces Connected Through FPGA I/O 2.4.1.3. MDIO 2.4.1.4. Common PHY Interface Design Considerations
2.4.1.1. PHY Interfaces x
2.4.1.1.1. RMII 2.4.1.1.2. RGMII
2.4.1.2. PHY Interfaces Connected Through FPGA I/O x
2.4.1.2.1. GMII/MII 2.4.1.2.2. Adapting to RGMII 2.4.1.2.3. Adapting to RMII 2.4.1.2.4. Adapting to SGMII
2.4.1.4. Common PHY Interface Design Considerations x
2.4.1.4.1. Signal Integrity
2.4.4. Design Guidelines for Flash Interfaces x
2.4.4.1. NAND Flash Interface Design Guidelines
2.5. HPS EMIF Design Considerations x
2.5.1. Considerations for Connecting HPS to SDRAM 2.5.2. HPS SDRAM I/O Locations
3. Interfacing to the FPGA for Stratix 10 SoC FPGAs x
3.1. Overview of HPS Memory-Mapped Interfaces 3.2. Recommended System Topologies 3.3. Recommended Starting Point for HPS-to-FPGA Interface Designs 3.4. Timing Closure for FPGA Accelerators 3.5. Information on How to Configure and Use the Bridges 3.6. Interfacing to the FPGA for Intel® Stratix® 10 SoC FPGAs Revision History
3.1. Overview of HPS Memory-Mapped Interfaces x
3.1.1. HPS-to-FPGA Bridge 3.1.2. Lightweight HPS-to-FPGA Bridge 3.1.3. FPGA-to-HPS Bridge 3.1.4. FPGA-to-SDRAM Ports 3.1.5. Interface Bandwidths
3.2. Recommended System Topologies x
3.2.1. HPS Accesses to FPGA Fabric 3.2.2. MPU Sharing Data with FPGA 3.2.3. Examples of Cacheable and Non-Cacheable Data Accesses From the FPGA
3.2.3. Examples of Cacheable and Non-Cacheable Data Accesses From the FPGA x
3.2.3.1. Example 1: FPGA Reading Data from HPS SDRAM Directly 3.2.3.2. Example 2: FPGA Writing Data into HPS SDRAM Directly 3.2.3.3. Example 3: FPGA Reading Cache Coherent Data from HPS 3.2.3.4. Example 4: FPGA Writing Cache Coherent Data to HPS GUIDELINE: Perform full accesses targeting FPGA-to-HPS bridge. GUIDELINE: Perform cacheable accesses aligned to 32 bytes targeting the FPGA-to-HPS bridge. GUIDELINE: When L2 ECC is enabled, ensure that cacheable accesses to the FPGA-to-HPS bridge are aligned to 8-byte boundaries. GUIDELINE: When L2 ECC is enabled, ensure that cacheable accesses to the FPGA-to-HPS bridge have groups of eight write strobes enabled.
4. System Considerations for Stratix 10 SoC FPGAs x
4.1. Timing Considerations 4.2. Maximizing Performance 4.3. System Level Cache Coherency 4.4. System Considerations for Stratix 10 SoC FPGAs Revision History
4.1. Timing Considerations x
4.1.1. Timing Closure for FPGA Accelerators 4.1.2. USB Interface Design Guidelines
4.1.1. Timing Closure for FPGA Accelerators x
4.1.1.1. HPS First and FPGA First Boot Considerations
5. Embedded Software Design Guidelines for Intel® Stratix® 10 SoC FPGAs x
5.1. Overview 5.2. Assembling the Components of Your Software Development Platform 5.3. Golden Hardware Reference Design (GHRD) 5.4. Selecting an Operating System for Your Application 5.5. Assembling Your Software Development Platform for Linux* 5.6. Assembling your Software Development Platform for a Bare-Metal Application 5.7. Assembling your Software Development Platform for Partner OS or RTOS 5.8. Choosing the Bootloader Software 5.9. Selecting Software Tools for Development, Debug and Trace 5.10. Boot And Configuration Considerations 5.11. System Reset Considerations 5.12. Flash Considerations 5.13. Embedded Software Debugging and Trace 5.14. Embedded Software Design Guidelines for Intel® Stratix® 10 SoC FPGAs Revision History
5.4. Selecting an Operating System for Your Application x
5.4.1. Using Linux* or RTOS 5.4.2. Developing a Bare-Metal Application 5.4.3. Using the Bootloader as a Bare-Metal Framework 5.4.4. Using Symmetrical vs. Asymmetrical Multiprocessing (SMP vs. AMP) Modes
5.5. Assembling Your Software Development Platform for Linux* x
5.5.1. Golden System Reference Design (GSRD) for Linux* 5.5.2. Source Code Management Considerations
5.9. Selecting Software Tools for Development, Debug and Trace x
5.9.1. Selecting Software Build Tools 5.9.2. Selecting Software Debug Tools 5.9.3. Selecting Software Trace Tools
5.10. Boot And Configuration Considerations x
5.10.1. Configuration Sources 5.10.2. Configuration Flash 5.10.3. Configuration Clock 5.10.4. Selecting HPS Boot Options 5.10.5. HPS Boot Sources 5.10.6. Remote System Update (RSU)
5.12. Flash Considerations x
5.12.1. Flash Programming Method 5.12.2. Using a Single flash for Both FPGA Configuration and HPS Mass Storage
6. Recommended Resources for Stratix 10 SoC FPGAs x
6.1. Device Documentation 6.2. Tools and Software Web Pages 6.3. Recommended Resources for Intel® Stratix® 10 SoC FPGAs Revision History
1. Introduction to the Intel® Stratix® 10 SoC Device Design Guidelines
2. Board Design Guidelines for Stratix 10 SoC FPGAs
3. Interfacing to the FPGA for Stratix 10 SoC FPGAs
4. System Considerations for Stratix 10 SoC FPGAs
5. Embedded Software Design Guidelines for Intel® Stratix® 10 SoC FPGAs
6. Recommended Resources for Stratix 10 SoC FPGAs

3.2.3.4. Example 4: FPGA Writing Cache Coherent Data to HPS

In this example the HPS MPU requires access to data that originates in the FPGA. The most efficient mechanism for sharing small blocks of data with the MPU is to have logic in the FPGA perform cacheable writes to the HPS. It is important that the amount of data to be written to the HPS be in the form of relatively small blocks because large block writes cause the L2 cache to thrash, causing the cache to write to SDRAM for most of the transfer. For large buffer transfers it is more appropriate to have the FPGA write data to the FPGA-to-SDRAM ports directly as shown in Example 2.

GUIDELINE: Perform full accesses targeting FPGA-to-HPS bridge.

For the transaction to be cacheable, the FPGA master must write to the FPGA-to-HPS bridge and utilize the cache extension signaling of the ACE-Lite protocol. See the Related Information for details on the ACE-Lite protocol signaling extensions for cache coherent accesses.

Figure 16. FPGA Writing Cache Coherent DataFor abbreviations, refer to the figure in Overview of HPS Memory-Mapped Interfaces.

GUIDELINE: Perform cacheable accesses aligned to 32 bytes targeting the FPGA-to-HPS bridge.

The CCU slave of the HPS is optimized for transactions that are the same size as the cache line (32 bytes). As a result you should attempt to align the data to 32 byte boundaries and ensure after data width adaptation the burst length into the 64-bit CCU slave is four beats long. For example, if the FPGA-to-HPS bridge is set up for 128-bit transactions you should align the data to be 32 byte aligned and perform full 128-bit accesses with a burst length of 2.

GUIDELINE: When L2 ECC is enabled, ensure that cacheable accesses to the FPGA-to-HPS bridge are aligned to 8-byte boundaries.

If you enable error checking and correction (ECC) in the L2 cache you must also ensure each 8-byte group of data is completely written. The L2 cache performs ECC operations on 64-bit boundaries so when performing cacheable accesses you must always align the access to 8-byte boundaries and write to all eight lanes at once. Failing to follow these rules results in double bit errors, which cannot be recovered.

Regardless whether ECC is enabled or disabled, 64 byte cache transactions result in the best performance. For more information about 64 byte cache transactions, refer to GUIDELINE: Access 64 bytes per cacheable transaction. in the "Example 3: FPGA Reading Cache Coherent Data from HPS" section.

GUIDELINE: When L2 ECC is enabled, ensure that cacheable accesses to the FPGA-to-HPS bridge have groups of eight write strobes enabled.

  • For FPGA-to-HPS accesses from 32-bit FPGA masters, burst length must be 2, 4, 8, or 16 with all write byte strobes enabled.
  • For FPGA-to-HPS accesses from 64-bit FPGA masters, all write byte strobes must be enabled.
  • For FPGA-to-HPS accesses from 128-bit FPGA masters, the upper eight or lower eight (or both) write byte strobes must be enabled.
Related Information
Level Two Title