Introduction to Intel® FPGA IP Cores

Download PDF
ID 683102
Date 4/03/2023
Public
Document Table of Contents
Document Table of Contents x
1. Introduction to Intel® FPGA IP Cores
1. Introduction to Intel® FPGA IP Cores x
1.1. IP Catalog and Parameter Editor 1.2. Installing and Licensing Intel® FPGA IP Cores 1.3. Best Practices for Intel® FPGA IP 1.4. IP General Settings 1.5. Specifying the IP Core Parameters and Options ( Intel® Quartus® Prime Pro Edition) 1.6. Generating IP Cores ( Intel® Quartus® Prime Standard Edition) 1.7. Modifying an IP Variation 1.8. Upgrading IP Cores 1.9. Simulating Intel® FPGA IP Cores 1.10. Synthesizing IP Cores in Other EDA Tools 1.11. Support for the IEEE 1735 Encryption Standard 1.12. Introduction to Intel® FPGA IP Cores Archives 1.13. Introduction to Intel® FPGA IP Cores Revision History
1.1. IP Catalog and Parameter Editor x
1.1.1. The Parameter Editor
1.2. Installing and Licensing Intel® FPGA IP Cores x
1.2.1. Intel® FPGA IP Evaluation Mode 1.2.2. Checking the IP License Status 1.2.3. Intel FPGA IP Versioning 1.2.4. Adding IP to IP Catalog
1.5. Specifying the IP Core Parameters and Options ( Intel® Quartus® Prime Pro Edition) x
1.5.1. IP Core Generation Output ( Intel® Quartus® Prime Pro Edition) 1.5.2. Scripting IP Core Generation
1.6. Generating IP Cores ( Intel® Quartus® Prime Standard Edition) x
1.6.1. IP Core Generation Output ( Intel® Quartus® Prime Standard Edition)
1.8. Upgrading IP Cores x
1.8.1. Upgrading IP Cores at Command-Line 1.8.2. Migrating IP Cores to a Different Device 1.8.3. Troubleshooting IP or Platform Designer System Upgrade
1.9. Simulating Intel® FPGA IP Cores x
1.9.1. Supported Simulators 1.9.2. Supported Simulation Flows 1.9.3. Generating IP Simulation Files 1.9.4. Scripting IP Simulation 1.9.5. Using NativeLink Simulation ( Intel® Quartus® Prime Standard Edition)
1.9.4. Scripting IP Simulation x
1.9.4.1. Generating a Combined Simulator Setup Script
1.9.4.1. Generating a Combined Simulator Setup Script x
1.9.4.1.1. Sourcing Aldec ActiveHDL* or Riviera Pro* Simulator Setup Scripts 1.9.4.1.2. Sourcing Cadence Incisive* Simulator Setup Scripts 1.9.4.1.3. Sourcing Cadence Xcelium* Simulator Setup Scripts 1.9.4.1.4. Sourcing ModelSim* or QuestaSim Simulator Setup Scripts 1.9.4.1.5. Sourcing Synopsys VCS* Simulator Setup Scripts 1.9.4.1.6. Sourcing Synopsys VCS* MX Simulator Setup Scripts
1.9.5. Using NativeLink Simulation ( Intel® Quartus® Prime Standard Edition) x
1.9.5.1. Setting Up NativeLink Simulation ( Intel® Quartus® Prime Standard Edition) 1.9.5.2. Generating IP Functional Simulation Models ( Intel® Quartus® Prime Standard Edition)
1.10. Synthesizing IP Cores in Other EDA Tools x
1.10.1. Instantiating IP Cores in HDL
1.10.1. Instantiating IP Cores in HDL x
1.10.1.1. Accessing HDL Code Templates
1.10.1.1. Accessing HDL Code Templates x
1.10.1.1.1. Example Top-Level Verilog HDL Module 1.10.1.1.2. Example Top-Level VHDL Module
1. Introduction to Intel® FPGA IP Cores

1.9.4.1.5. Sourcing Synopsys VCS* Simulator Setup Scripts

Follow these steps to incorporate the generated Synopsys VCS* simulation scripts into a top-level project simulation script.
  1. The generated simulation script contains these template lines. Cut and paste the lines preceding the “helper file” into a new executable file. For example, synopsys_vcs.f. 
    # # Start of template
# # If the copied and modified template file is "vcs_sim.sh", run it
# # as: ./vcs_sim.sh
# # 
# # Override the top-level name
# # specify a command file containing elaboration options
# # (system verilog extension, and compile the top-level).
# # Override the sim options, so the simulation
# # runs forever (until $finish()).
# source vcs_setup.sh
# TOP_LEVEL_NAME=top
# USER_DEFINED_ELAB_OPTIONS="'-f ../../../synopsys_vcs.f'"
# USER_DEFINED_SIM_OPTIONS=""
# 
# # helper file: synopsys_vcs.f
# +systemverilogext+.sv
# ../../../top.sv
# # End of template
  2. Delete the first two characters of each line (comment and space) for the vcs.sh file, as shown below: 
    # Start of template
# If the copied and modified template file is "vcs_sim.sh", run it
# as: ./vcs_sim.sh
# 
# Override the top-level name
# specify a command file containing elaboration options
# (system verilog extension, and compile the top-level).
# Override the sim options, so the simulation
# runs forever (until $finish()).
source vcs_setup.sh
TOP_LEVEL_NAME=top
USER_DEFINED_ELAB_OPTIONS="'-f ../../../synopsys_vcs.f'"
USER_DEFINED_SIM_OPTIONS=""
  3. Delete the first two characters of each line (comment and space) for the synopsys_vcs.f file, as shown below: 
    # helper file: synopsys_vcs.f
 +systemverilogext+.sv
 ../../../top.sv
# End of template
  4. Modify the TOP_LEVEL_NAME and compilation step appropriately, depending on the simulation’s top-level file. For example: 
    TOP_LEVEL_NAME=sim_top
  5. If necessary, add the QSYS_SIMDIR variable to point to the location of the generated IP simulation files. Specify any other changes required to match your design simulation requirements. The scripts offer variables to set compilation or simulation options. Refer to the generated script for details.
  6. Run the resulting top-level script from the generated simulation directory by specifying the path to vcs_sim.sh.
Level Two Title