Intel Agilex® 7 Variable Precision DSP Blocks User Guide

Download PDF
ID 683037
Date 10/02/2023
Public
Document Table of Contents
Document Table of Contents x
1. Intel Agilex® 7 Variable Precision DSP Blocks Overview 2. Intel Agilex® 7 Variable Precision DSP Blocks Architecture 3. Intel Agilex® 7 Variable Precision DSP Blocks Operational Modes 4. Intel Agilex® 7 Variable Precision DSP Blocks Design Considerations 5. Native Fixed Point DSP Intel Agilex® FPGA IP Core References 6. Multiply Adder Intel® FPGA IP Core References 7. ALTMULT_COMPLEX Intel® FPGA IP Core References 8. LPM_MULT Intel® FPGA IP Core References 9. LPM_DIVIDE Intel® FPGA IP Core References 10. Native Floating Point DSP Intel Agilex® FPGA IP References 11. Intel Agilex® 7 Variable Precision DSP Blocks User Guide Archives 12. Document Revision History for the Intel Agilex® 7 Variable Precision DSP Blocks User Guide
1. Intel Agilex® 7 Variable Precision DSP Blocks Overview x
1.1. Features 1.2. Supported Operational Modes in Intel Agilex® 7 Devices
1.2. Supported Operational Modes in Intel Agilex® 7 Devices x
1.2.1. Fixed-point Arithmetic 1.2.2. Floating-point Arithmetic
2. Intel Agilex® 7 Variable Precision DSP Blocks Architecture x
2.1. Fixed-point Arithmetic 2.2. Floating-point Arithmetic
2.1. Fixed-point Arithmetic x
2.1.1. Input Register Bank for Fixed-point Arithmetic 2.1.2. Pipeline Registers for Fixed-point Arithmetic 2.1.3. Pre-adder for Fixed-point Arithmetic 2.1.4. Internal Coefficient for Fixed-point Arithmetic 2.1.5. Multipliers for Fixed-point Arithmetic 2.1.6. Adder or Subtractor for Fixed-point Arithmetic 2.1.7. Accumulator, Chainout Adder, and Preload Constant for Fixed-point Arithmetic 2.1.8. Systolic Register for Fixed-point Arithmetic 2.1.9. Double Accumulation Register for Fixed-point Arithmetic 2.1.10. Output Register Bank for Fixed-point Arithmetic
2.1.7. Accumulator, Chainout Adder, and Preload Constant for Fixed-point Arithmetic x
2.1.7.1. Dynamic Chainout
2.2. Floating-point Arithmetic x
2.2.1. Input Register Bank for Floating-point Arithmetic 2.2.2. Pipeline Registers for Floating-point Arithmetic 2.2.3. Multipliers for Floating-point Arithmetic 2.2.4. Adder or Subtractor for Floating-point Arithmetic 2.2.5. Output Register Bank for Floating-point Arithmetic 2.2.6. Exception Handling for Floating-point Arithmetic
3. Intel Agilex® 7 Variable Precision DSP Blocks Operational Modes x
3.1. Operational Modes for Fixed-point Arithmetic 3.2. Operational Modes for Floating-point Arithmetic
3.1. Operational Modes for Fixed-point Arithmetic x
3.1.1. Independent Multiplier Mode 3.1.2. 8 x 8 (Unsigned) or 9 x 9 (Signed) Sum of 4 Mode 3.1.3. Multiplier Adder Sum Mode 3.1.4. Independent Complex Multiplier 3.1.5. Systolic FIR Mode
3.1.1. Independent Multiplier Mode x
3.1.1.1. 18 × 18 or 18 × 19 Independent Multiplier 3.1.1.2. 27 × 27 Independent Multiplier
3.1.4. Independent Complex Multiplier x
3.1.4.1. 18 × 19 Multiplication Summed with 36-Bit Input Mode
3.1.5. Systolic FIR Mode x
3.1.5.1. Mapping Systolic Mode User View to Variable Precision Block Architecture View 3.1.5.2. 18-bit Systolic FIR Mode 3.1.5.3. 27-Bit Systolic FIR Mode
3.2. Operational Modes for Floating-point Arithmetic x
3.2.1. FP32 Single-precision Floating-point Arithmetic Functions 3.2.2. FP16 Half-precision Floating-point Arithmetic Functions 3.2.3. Multiple Floating-point Variable DSP Blocks Functions
3.2.1. FP32 Single-precision Floating-point Arithmetic Functions x
3.2.1.1. FP32 Multiplication Mode 3.2.1.2. Adder or Subtract Mode 3.2.1.3. Multiply Accumulate Mode 3.2.1.4. FP32 Vector One Mode 3.2.1.5. FP32 Vector Two Mode
3.2.2. FP16 Half-precision Floating-point Arithmetic Functions x
3.2.2.1. FP16 Supported Precision Formats 3.2.2.2. Sum of Two FP16 Multiplication Mode 3.2.2.3. Sum of Two FP16 Multiplication with FP32 Addition Mode 3.2.2.4. Sum of Two FP16 Multiplication with Accumulation Mode 3.2.2.5. FP16 Vector One Mode 3.2.2.6. FP16 Vector Two Mode 3.2.2.7. FP16 Vector Three Mode
3.2.3. Multiple Floating-point Variable DSP Blocks Functions x
3.2.3.1. Multiply-Add or Multiply-Subtract Mode 3.2.3.2. Direct Vector Dot Product 3.2.3.3. Complex Multiplication
4. Intel Agilex® 7 Variable Precision DSP Blocks Design Considerations x
4.1. Fixed-point Arithmetic 4.2. Floating-point Arithmetic 4.3. DSP Block Cascade Limit in Intel Agilex® 7 Devices
4.1. Fixed-point Arithmetic x
4.1.1. Configurations for Input, Pipeline, and Output Registers 4.1.2. Internal Coefficient and Pre-Adder for Fixed-point Arithmetic 4.1.3. Accumulator for Fixed-point Arithmetic 4.1.4. Input Cascade for Fixed-point Arithmetic 4.1.5. Chainout Adder
4.1.1. Configurations for Input, Pipeline, and Output Registers x
4.1.1.1. Restrictions for Input Registers 4.1.1.2. Restrictions for Pipeline Registers 4.1.1.3. Supported Register Configurations per Operation Modes
4.1.4. Input Cascade for Fixed-point Arithmetic x
4.1.4.1. Dynamic Scanin
4.2. Floating-point Arithmetic x
4.2.1. Configurations for Input, Pipeline, and Output Registers 4.2.2. Chainout Adder
4.2.1. Configurations for Input, Pipeline, and Output Registers x
4.2.1.1. FP32 Operation Modes Supported Register Configurations 4.2.1.2. FP16 Operation Mode Supported Register Configurations
5. Native Fixed Point DSP Intel Agilex® FPGA IP Core References x
5.1. Native Fixed Point DSP Intel Agilex® FPGA IP Release Information 5.2. Supported Operational Modes 5.3. Maximum Input Data Width for Fixed-point Arithmetic 5.4. Maximum Output Data Width for Fixed-point Arithmetic 5.5. Parameterizing Native Fixed Point DSP IP 5.6. Native Fixed Point DSP Intel Agilex® FPGA IP Signals 5.7. IP Migration
5.3. Maximum Input Data Width for Fixed-point Arithmetic x
5.3.1. Using Less Than 36-Bit Operand In 18 x 18 Plus 36 Mode Example
5.5. Parameterizing Native Fixed Point DSP IP x
5.5.1. Operation Mode Tab 5.5.2. Input Cascade Tab 5.5.3. Pre-adder Tab 5.5.4. Internal Coefficient Tab 5.5.5. Accumulator/Output Chaining 5.5.6. Pipelining 5.5.7. Clear Signal
5.6. Native Fixed Point DSP Intel Agilex® FPGA IP Signals x
5.6.1. 9 × 9 Sum of 4 Mode Signals 5.6.2. 18 × 18 Full Mode Signals 5.6.3. 18 × 18 Sum of Two Mode Signals 5.6.4. 18 × 18 Plus 36 Mode Signals 5.6.5. 18 × 18 Systolic Mode Signals 5.6.6. 27 × 27 Mode Signals
6. Multiply Adder Intel® FPGA IP Core References x
6.1. Multiply Adder Intel® FPGA IP Release Information 6.2. Features 6.3. Parameters 6.4. Signals
6.2. Features x
6.2.1. Pre-adder 6.2.2. Systolic Delay Register 6.2.3. Pre-load Constant 6.2.4. Double Accumulator
6.2.1. Pre-adder x
6.2.1.1. Pre-adder Simple Mode 6.2.1.2. Pre-adder Coefficient Mode 6.2.1.3. Pre-adder Input Mode 6.2.1.4. Pre-adder Square Mode 6.2.1.5. Pre-adder Constant Mode
6.3. Parameters x
6.3.1. General Tab 6.3.2. Extra Modes 6.3.3. Multipliers Tab 6.3.4. Preadder Tab 6.3.5. Accumulator Tab 6.3.6. Systolic/Chainout Tab 6.3.7. Pipelining Tab
7. ALTMULT_COMPLEX Intel® FPGA IP Core References x
7.1. ALTMULT_COMPLEX Intel® FPGA IP Release Information 7.2. Features 7.3. Complex Multiplication 7.4. Parameters 7.5. Signals
8. LPM_MULT Intel® FPGA IP Core References x
8.1. LPM_MULT Intel® FPGA IP Release Information 8.2. Features 8.3. Parameters 8.4. Signals
8.3. Parameters x
8.3.1. General Tab 8.3.2. General 2 Tab 8.3.3. Pipelining Tab
9. LPM_DIVIDE Intel® FPGA IP Core References x
9.1. LPM_DIVIDE Intel® FPGA IP Release Information 9.2. Features 9.3. Verilog HDL Prototype 9.4. VHDL Component Declaration 9.5. VHDL LIBRARY_USE Declaration 9.6. Ports 9.7. Parameters
9.7. Parameters x
9.7.1. General Tab 9.7.2. General1 Tab
10. Native Floating Point DSP Intel Agilex® FPGA IP References x
10.1. Native Floating Point DSP Intel Agilex® FPGA IP Release Information 10.2. Native Floating Point DSP Intel Agilex® FPGA IP Core Supported Operational Modes 10.3. Parameterizing the Native Floating Point DSP Intel Agilex® FPGA IP 10.4. Native Floating Point DSP Intel Agilex® FPGA IP Core Signals 10.5. IP Migration
10.3. Parameterizing the Native Floating Point DSP Intel Agilex® FPGA IP x
10.3.1. General Tab 10.3.2. Registers Tab
10.4. Native Floating Point DSP Intel Agilex® FPGA IP Core Signals x
10.4.1. FP32 Multiplication Mode Signals 10.4.2. FP32 Addition or Subtraction Mode Signals 10.4.3. FP32 Multiplication with Addition or Subtraction Mode Signals 10.4.4. FP32 Multiplication with Accumulation Mode Signals 10.4.5. FP32 Vector One and Vector Two Modes Signals 10.4.6. Sum of Two FP16 Multiplication Mode Signals 10.4.7. Sum of Two FP16 Multiplication with FP32 Addition Mode Signals 10.4.8. Sum of Two FP16 Multiplication with Accumulation Mode Signals 10.4.9. FP16 Vector One and Vector Two Modes Signals 10.4.10. FP16 Vector Three Mode Signals
1. Intel Agilex® 7 Variable Precision DSP Blocks Overview
2. Intel Agilex® 7 Variable Precision DSP Blocks Architecture
3. Intel Agilex® 7 Variable Precision DSP Blocks Operational Modes
4. Intel Agilex® 7 Variable Precision DSP Blocks Design Considerations
5. Native Fixed Point DSP Intel Agilex® FPGA IP Core References
6. Multiply Adder Intel® FPGA IP Core References
7. ALTMULT_COMPLEX Intel® FPGA IP Core References
8. LPM_MULT Intel® FPGA IP Core References
9. LPM_DIVIDE Intel® FPGA IP Core References
10. Native Floating Point DSP Intel Agilex® FPGA IP References
11. Intel Agilex® 7 Variable Precision DSP Blocks User Guide Archives
12. Document Revision History for the Intel Agilex® 7 Variable Precision DSP Blocks User Guide

6.3.5. Accumulator Tab

Table 88.  Accumulator Tab
Parameter Value Default Value Description
Enable accumulator?

YES,

NO

NO Select YES to enable the accumulator.

You must select Register output of adder unit when using accumulator feature.

What is the accumulator operation type?

ADD,

SUB

ADD Specifies the operation of the accumulator:
  • ADD for addition operation
  • SUB for subtraction operation.

You must select YES for Enable accumulator? parameter to enable this option.

Preload Constant
Enable preload constant

On

Off

 Off Enable the accum_sload or sload_accum signals and the registers input to dynamically select the input to the accumulator.

When accum_sload is low or sload_accum is high, the multiplier output is feed into the accumulator.

When accum_sload is high or sload_accum is low, a user specified preload constant is feed into the accumulator.

You must select YES for Enable accumulator parameter to enable this option.

What is the input of accumulate port connected to?

ACCUM_SLOAD,

SLOAD_ACCUM

ACCUM_SLOAD Specifies the behavior of accum_sload/sload_accum signal.

ACCUM_SLOAD: Drive accum_sload low to load the multiplier output to the accumulator.

SLOAD_ACCUM: Drive sload_accum high to load the multiplier output to the accumulator.

You must select Enable preload constant option to enable this parameter.

Select value for preload constant 0 - 64 64 Specify the preset constant value.

This value can be 2N where N is the preset constant value.

N=64 represents a constant zero.

You must select Enable preload constant option to enable this parameter.

What is the source for clock input?

Clock0

Clock1

Clock2

Clock0 Select Clock0 , Clock1 or Clock2 to specify the input clock signal for accum_sload/sload_accum register.

You must select Enable preload constant option to enable this parameter.

What is the source for asynchronous clear input?

NONE

ACLR0

ACLR1

NONE Specifies the asynchronous clear source for the accum_sload/sload_accum register.

You must select Enable preload constant option to enable this parameter.

What is the source for synchronous clear input?

NONE

SCLR0

SCLR1

NONE Specifies the synchronous clear source for the accum_sload/sload_accum register.

You must select Enable preload constant option to enable this parameter.

Enable double accumulator

TRUE

FALSE

FALSE To enable or disable the double accumulator feature.
Level Two Title