Known Issues with the Intel® Virtual RAID on CPU (Intel® VROC) 8.6 Release for Windows*
The following information lists the known issues with the Intel® VROC 8.6 release for Windows*. To learn about the latest updates of Intel® VROC for Windows*, refer to the Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows*.
| Issue ID | Description |
| 1805900436 | The Intel® VROC F6 drivers may not properly load, and a refresh may be required. |
| 14015389340 | When using AtaPassThru protocol to get information on attached devices from the Intel® VROC Pre-OS, the value of GetNextTargetLun may not be successful. |
| 15010088464 | When the SATA controller is switched to RAID mode, SATA drive information will be displayed in the Intel® VROC SATA HII instead. So, users can reference the device information in the Intel® VROC SATA HII. |
| 15011986293 | When booting the platform with a degraded Intel® VROC RAID 1 data volume, the Intel® VROC 8.0 Graphical User Interface (GUI) utility may not properly display the RAID volume. |
| 15012192390 | An Intel® VROC SATA HDD may have a problem unlocking after sending the 0xf2 command. |
| 15014262993 | Windows* Out-of-Band (OOB) cannot identify if pass/fail after patch successfully for disk set write cache on. |
| 18012869559 | The Intel® VROC Graphical User Interface (GUI) and Command-Line Interface (CLI) utilities may not forbid performing operations that use self-encrypting drives in locked state. Creating RAID volumes with locked members may result in a failed volume state. |
| 18015334984 | The warning message: Warning: The AHCI driver will be updated to the latest Microsoft AHCI driver in the system, does not occur when installing Intel® VROC in AHCI mode using the installer. |
| 18016767645 | Within the Intel® VROC SED Manager, a physical drive may appear in twice. |
| 18020541368 | While within the Intel® VROC SED Manager, unencrypted drives that are unplugged and then are selected to have a security key to be setup may experience a platform hang. |
| 18022812016 | When the operating system performs a TRIM command onto an Intel® VROC RAID 1 or RAID 10 volume comprised of drives that perform TRIM activities in different ways may encounter a data inconsistency on those areas that had been TRIMed. |
| 18024185962 | A RAID volume may become degraded after the initialization process completes, if two of the drives encounter a bad block condition in the same sector. |
| 18027522818 | Specific code rework done as we do not support creating volumes with legacy values anymore. |
| 18029487344 | Intel® VROC operating system interfaces (Windows* GUI & CLI, Linux* mdadm, Linux*/Windows* OOB) may not forbid performing operations that use self-encrypting drives in locked/foreign state. RAID volume operations with locked/foreign devices will be failed (e.g. RAID volume creation will be failed). |
| 18030259585 | State of drive resource for locked Opal* drives is enabled where it should be StandbyOffline in which the RAID volume rebuild may not be blocked and hot-inserted device detection may be failed. |
| 18034442524 | Unlocked Opal* drives are present alongside with hot-plugged non-opal drives in the operating system in which the RAID volume rebuild may not be blocked and hot-inserted device detection may be failed. |
| 18036343861 | Creating a RAID volume on disks that contains data and non-existent OdataId may return an incorrect error or an invalid resolution message. |
| 18036610422 | OperationName may show an inconsistency between the RAID volume and the member drive under the rebuild operation. |
| 18037125636 | Intel® VROC operating system interfaces (Windows* GUI & CLI, Linux* mdadm, Linux*/Windows* OOB) may not forbid performing operations on hot-inserted self-encrypting drives in locked/foreign state. RAID volume hot-plug related operations with locked/foreign devices will be failed (e.g. RAID volume rebuild may not be blocked, hot-inserted device detection will be failed). |
| 22018681854 | The Intel® VROC Graphical User Interface (GUI) utility did not show the rebuilding event as the disk is hot-plug and inserted when a RAID member is only 100MB. |
| Looking for more information about the Intel® VROC 8.6 release? |
| Check out the following resources: |
| Related topics |
| Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows* |
| Release Notes for Intel® Virtual RAID on CPU (Intel® VROC) |
| Resources for Intel® Virtual RAID on CPU (Intel® VROC) |