Skip To Main Content
Support Knowledge Base

Guide to Enable POST (Power On Self-Test) Function Hotkeys on Intel® NUCs

Content Type: Troubleshooting   |   Article ID: 000089907   |   Last Reviewed: 02/12/2025

If the prompts showing the keys to press to enter the BIOS setup, Boot Menu, or Network Boot are shown, try the following:

For Intel® NUCs with Visual BIOS For Intel® NUCs with Aptio V BIOS
  1. Press F2 during the power on process.
  2. Enter the BIOS setup
  3. Go to Advanced > Boot > Boot Configuration.
  4. In the Boot Display Config pane:
    1. Enable POST Function Hotkeys Displayed
    2. Enable Display F2 to Enter Setup.
  5. Press F10 to save and exit BIOS.
  1. Press F2 during the power on process.
  2. Enter the BIOS setup
  3. Go to Boot > Boot Display Configuration.
    1. Enable POST Function Hotkeys Displayed
    2. Enable Display F2 to Enter Setup.
  4. Press F10 to save and exit BIOS.

 

 

Related Products

This article applies to 46 products.

Discontinued Products