Skip To Main Content
Support Knowledge Base

How to Access the RAID BIOS During POST for the Tri-Mode Intel® RAID Controllers

Content Type: Install & Setup   |   Article ID: 000038385   |   Last Reviewed: 07/06/2021

Environment

Tri-Mode Intel® RAID Controllers

Description

There is no prompt during system POST to access/open the RAID BIOS Option ROM configuration utility.

Resolution

Follow the steps below to configure the Tri-Mode Intel® RAID Controllers in pre-boot environment:

Note

Your system must be configured in UEFI boot mode. There is no built-in configuration utility for the Tri-Mode controllers when the system is configured for legacy boot mode.

  1. Boot the system.
  2. Press the F2 key to enter the BIOS setup.
  3. Navigate to Advanced -> PCI Configuration -> UEFI Option ROM Control.
  4. Under Storage Controller, select your Tri-Mode Intel® RAID Controller.