Skip To Main Content
Support Knowledge Base

How to Rebuild the RAID Array Using Intel® Rapid Storage Technology (Intel® RST) from the BIOS

Content Type: Troubleshooting   |   Article ID: 000035459   |   Last Reviewed: 04/22/2022

Environment

Operating System

All
Intel® Rapid Storage Technology (Intel® RST)

Description

RAID array requires a drive to be replaced and to be rebuilt

Resolution

Replace drive with a compatible drive in the system.

Note

All data on the drive will be erased

  1. Access the BIOS (during the boot process press the DEL or F2 key).
  2. Locate the Intel Rapid Storage Technology menu.
  3. Select the newly added (non-RAID) drive.
  4. Select the Spare option.

Once this is saved and system rebooted the rebuild process should start on the system.

Related Products

This article applies to 1 products.