Skip To Main Content
Support Knowledge Base

System Requirements for an Intel® Optane™ SSD 905P Series Drive

Content Type: Product Information & Documentation   |   Article ID: 000028298   |   Last Reviewed: 03/03/2022

The PCI Express* (PCIe*) Intel® Optane™ SSD 905P Series is based on the NVMe* standard with Intel® Optane™ technology. Successful use of the Intel Optane SSD 905P Series as a boot device requires NVMe* hardware, BIOS, and driver support.

Two hardware form factors available

Form Factor Image
Intel® Optane™ SSD 905P Series add-in card (AiC), half height, half length (HHHL)

The HHHL comes with the full height bracket installed and a half height bracket in the box.

 HHHL
Note Two U.2, 2.5 inch retail box options are available depending on what cable your motherboard or system supports for NVMe* devices. See what’s in the box.
Form Factor and Accessories Image
Intel® Optane™ SSD 905P Series U.2 2.5 inch drive Intel® Optane™ SSD 905P Series U.2 2.5 inch drive

[Retail Box Option 1]

Includes U.2 (SFF-8639) to SFF-8643 Adapter cable

Note

Your motherboard must accept the SFF 8643 connector. Make sure the electrical connection on the motherboard, is PCIe, not SAS.

Or, use an SFF-8643 to M.2 adapter with a PCIe M.2 capable motherboard (shown on the right).
Adapter cableSFF-8643 to M.2 adapter

[Retail Box Option 2]

Includes U.2 (SFF-8639) to M.2 Adapter cable

 U.2 (SFF-8639) to M.2 Adapter cable
Note This is a storage device, not an acceleration device, so there's no need to download any of the software that the Optane modules usually need. Also, because this is not an acceleration device, it is not possible to accelerate additional drives install on the system.

 

Basic requirements

To use as a bootable drive, you need:

  • PCIe NVMe storage capable hardware motherboard support. Consult your system or motherboard vendor for more information.
    • Add-in Card (AiC) form factor: PCIe 3.0 x4 connector (best performance)
    • 2.5 inch form factor:
      • U.2 Cable for connection to the SSD
      • PCIe-capable SFF-8643 connector or a PCIe-capable M.2 connector
  • Airflow across the drive to provide cooling, such as a front fan and rear fan.
  • System BIOS that supports UEFI 2.3.1 or later with NVMe support..
  • GPT* drive format (See how to install OS to GPT).
  • Microsoft Windows 7* or Windows® 10 operating system (OS).
    Note Other OS supporting these requirements may function properly, but we haven't validated them yet.
  • Intel® NVMe driver installed during OS installation – follow instructions in the Boot Installation Guide.
    Note OS that contains a native NVMe* driver should also work, but the Intel NVMe driver is preferred for Windows.
    • If there's no native OS NVMe driver and the Intel NVMe driver isn't available, the drive isn't seen during installation.

To use as a secondary data drive, you need:

  • PCIe NVMe storage capable hardware motherboard support. Consult your system/motherboard vendor for more information.
    • Add-in Card Form Factor: PCIe 3.0 x4 connector (Best performance)
    • 2.5 inch Form Factor:
      • U.2 Cable for connection to the SSD
      • PCIe-capable SFF-8643 connector or a PCIe-capable M.2 connector
  • Airflow across the drive to provide cooling, such as a front fan and rear fan.
  • System BIOS that supports UEFI 2.3.1 or later with NVMe support.
  • Microsoft Windows 7 or Windows 10 OS.
    Note Other OS supporting these requirements may function properly, but we haven't validated them yet.
  • Intel® NVMe driver installed after OS installation.
    Note OS that contains a native NVMe driver should also work, but the Intel NVMe driver is preferred for Windows.

Need more help?

Contact support
Contact support