Visible to Intel only — GUID: qjl1651682534421
Ixiasoft
1. Introduction
2. Interface Overview
3. Parameters
4. Designing with the IP Core
5. MACsec Intel® FPGA IP Example Design
6. Functional Description
7. Configuration Registers for MACsec IP
8. MACsec Intel FPGA IP User Guide Archives
9. Document Revision History for the MACsec Intel FPGA IP User Guide
2.2.1.1. Common Port Mux Interface
2.2.1.2. Common Port Demux Interface
2.2.1.3. Controlled Port Mux Interface
2.2.1.4. Controlled Port Demux Interface
2.2.1.5. Uncontrolled Port RX Interface
2.2.1.6. Uncontrolled Port TX Interface
2.2.1.7. Crypto RX Interface
2.2.1.8. Crypto TX Interface
2.2.1.9. Management Interface
2.2.1.10. Decrypt Port Mux Management Interface
2.2.1.11. Decrypt Port Demux Management Interface
2.2.1.12. Encrypt Port Mux Management Interface
2.2.1.13. Encrypt Port Demux Management Interface
2.2.1.14. Crypto IP Management Bus
2.2.1.15. Miscellaneous Control Signals
2.2.2.1. Common Port Mux Interface Waveform
2.2.2.2. Common Port Demux Interface Waveform
2.2.2.3. Controlled Port Mux Interface Waveform
2.2.2.4. Controlled Port Demux Interface Waveform
2.2.2.5. Uncontrolled Port RX Interface Waveform
2.2.2.6. Uncontrolled Port TX Interface Waveform
2.2.2.7. Crypto RX Waveform
2.2.2.8. Crypto TX Waveform
2.2.2.9. MACsec Management Interface (Read)
2.2.2.10. MACsec Management Interface (Write)
Visible to Intel only — GUID: qjl1651682534421
Ixiasoft
1.6. Resource Utilization
The resource utilization for the MACsec Intel FPGA IP is obtained from the Intel® Quartus® Prime Pro Edition software version 22.3 and is shown in the table below:
MACSec IP-Config | ALM Count | M20k |
---|---|---|
1x1 Duplex | 71K | 630 |
2x2 Duplex | 81K | 749 |
4x4 Duplex | 105K | 941 |
6x6 Duplex | 131K | 1211 |
8x8 Duplex | 155K | 1440 |