Visible to Intel only — GUID: phl1690859392983
Ixiasoft
Visible to Intel only — GUID: phl1690859392983
Ixiasoft
7.3.7.3. Updating the Factory Image
The Update the Factory Image menu, Option 6 performs RSU Image update by updating to a new factory image and decision firmware version. Before initiating Option 6, you are recommended to run Option 7 to erase the current decision firmware to show that a new decision firmware is updated along with the factory image.
The operation begin by reading the Factory Update RPD image from the QSPI flash, starting from address 0x3800000. After the RPD image is read successfully, the software proceeds to add and verify the configuration bitstream into a temporary FactoryUpdate slot. Once it is completed, power cycle the device.
Erase Decision Firmware | Power Cycle | ||
---|---|---|---|
Before | After | Before | After |
DCMF0: OK DCMF1: OK DCMF2: OK DCMF3: OK |
DCMF0: OK DCMF1: Corrupted DCMF2: Corrupted DCMF3: Corrupted |
DCMF0: OK DCMF1: Corrupted DCMF2: Corrupted DCMF3: Corrupted |
DCMF0: OK DCMF1: OK DCMF2: OK DCMF3: OK |
Factory Image Update Log
Reading the Factory Update image based on RPD memory map.... Read Successfully. Slot FactoryUpdate created at 0x2000000 with size = 0x460000 bytes. Slot 2 is erased. NAME: FactoryUpdate OFFSET: 0x0000000002000000 SIZE: 0x00460000 PRIORITY: [disabled] Slot 2 was programmed with size=4587520. Slot 2 was verified with size=4587520. Add and Verify the image successfully in Slot 2 Please power cycle the device to update the factory image.