F-Tile JESD204C Intel® FPGA IP User Guide

Download PDF
ID 691272
Date 4/11/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the F-Tile JESD204C Intel® FPGA IP User Guide 2. Overview of the F-Tile JESD204C Intel® FPGA IP 3. Functional Description 4. Getting Started 5. Designing with the F-Tile JESD204C Intel® FPGA IP 6. F-Tile JESD204C Intel® FPGA IP Parameters 7. Interface Signals 8. Control and Status Registers 9. F-Tile JESD204C Intel® FPGA IP User Guide Archives 10. Document Revision History for the F-Tile JESD204C Intel® FPGA IP User Guide
2. Overview of the F-Tile JESD204C Intel® FPGA IP x
2.1. Release Information 2.2. Device Family Support 2.3. F-Tile JESD204C Intel® FPGA IP Features 2.4. Performance and Resource Utilization
3. Functional Description x
3.1. Clocks 3.2. Local Extended Multiblock Clock 3.3. CRC Encoding/Decoding 3.4. Scrambler/Descrambler
3.1. Clocks x
3.1.1. Device Clock 3.1.2. Frame Clock and Link Clock 3.1.3. System PLL
3.2. Local Extended Multiblock Clock x
3.2.1. LEMC Counter
4. Getting Started x
4.1. Installing and Licensing Intel® FPGA IP Cores 4.2. Intel® FPGA IP Evaluation Mode 4.3. IP Catalog and Parameter Editor 4.4. F-Tile JESD204C IP Component Files 4.5. Creating a New Intel® Quartus® Prime Project 4.6. Parameterizing and Generating the IP 4.7. Compiling the F-Tile JESD204C IP Design 4.8. Programming an FPGA Device
5. Designing with the F-Tile JESD204C Intel® FPGA IP x
5.1. Reset Initialization 5.2. Configuration Phase 5.3. Link Reinitialization 5.4. SYSREF Sampling 5.5. Interrupt and Error Handling 5.6. Multi-Device Synchronization 5.7. Deterministic Latency 5.8. Transceiver Toolkit
5.1. Reset Initialization x
5.1.1. F-Tile JESD204C TX Reset Sequence 5.1.2. F-Tile JESD204C RX Reset Sequence
5.5. Interrupt and Error Handling x
5.5.1. Interrupt Configuration for TX and RX 5.5.2. Interrupt Top Half ISR Handler 5.5.3. Interrupt Bottom Half ISR Handler
5.6. Multi-Device Synchronization x
5.6.1. Multi-Device DAC Application for Subclass 1 5.6.2. Multi-Device ADC Application for Subclass 1
5.7. Deterministic Latency x
5.7.1. RBD Tuning Mechanism
7. Interface Signals x
7.1. Transmitter Signals 7.2. Receiver Signals
8. Control and Status Registers x
8.1. Transmitter and Receiver Registers
1. About the F-Tile JESD204C Intel® FPGA IP User Guide
2. Overview of the F-Tile JESD204C Intel® FPGA IP
3. Functional Description
4. Getting Started
5. Designing with the F-Tile JESD204C Intel® FPGA IP
6. F-Tile JESD204C Intel® FPGA IP Parameters
7. Interface Signals
8. Control and Status Registers
9. F-Tile JESD204C Intel® FPGA IP User Guide Archives
10. Document Revision History for the F-Tile JESD204C Intel® FPGA IP User Guide

5.5. Interrupt and Error Handling

The F-Tile JESD204C IP interrupts the processor when there are errors or reinitialization requests in the design. The interrupts are peripheral and level sensitive.

The IP holds a level-sensitive interrupt signal asserted until the peripheral deasserts the interrupt signal. When the level-sensitive interrupt is high, the state of the interrupt in the Interrupt Controller is pending or active pending. If the peripheral deasserts the interrupt signal for any reason, the Interrupt Controller removes the pending state from the interrupt.

Every error condition in the F-Tile JESD204C IP latches on the error status and keeps the interrupt signal asserted until the error is serviced and the ISR writes a 1 to clear the error status.

When interrupt is asserted and fulfills the Interrupt Controller configuration (for example, priority, interrupt IDs), the processor jumps to the Interrupt Service Routine (ISR) to execute the routine.

The ISR must service the requirements of the F-Tile JESD204C IP by reading the error status and then clearing the interrupt, so that the F-Tile JESD204C IP could deassert the interrupt. This is particularly important for level-sensitive interrupts, where ISR must ensure that the interrupt is deasserted at the Interrupt Controller input before proceeding to the next step. Typically, this is called the top half ISR handler.

The bottom half ISR handler may require a chain of events.


Section Content
Interrupt Configuration for TX and RX
Interrupt Top Half ISR Handler
Interrupt Bottom Half ISR Handler

Level Two Title