HDMI Intel® FPGA IP User Guide

ID 683798
Date 4/22/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.2. HDMI Hardware Design Requirements

The HDMI design requires an Intel FPGA board and supporting hardware.
  • Intel FPGA board
  • Bitec HDMI HSMC 2.0 daughter card
  • Standard HDMI source—for example, PC with a graphic card and HDMI output
  • Standard HDMI sink—for example, monitor with HDMI input
  • 2 HDMI cables
    • A cable to connect the graphics card to the Bitec daughter card RX connector.
    • A cable to connect the Bitec daughter card TX connector to the monitor.
Table 20.   Intel FPGA Boards and Bitec HDMI HSMC 2.0 Daughter Cards Supported for the Design
Design Example Intel FPGA Board Bitec HDMI HSMC 2.0 Daughter Card
Arria V (av_sk) Arria V GX FPGA Starter Kit HSMC (Rev8)
Arria V (av_sk_hdmi2) Arria V GX FPGA Starter Kit HSMC (Rev8)
Stratix V (sv_hdmi2) Stratix V GX FPGA Development Kit HSMC (Rev8)