Intel® Cyclone® 10 GX Native Fixed Point DSP IP Core User Guide

Download PDF
ID 683739
Date 11/06/2017
Public
Document Table of Contents
Document Table of Contents x
1. Intel® Cyclone® 10 GX Native Fixed Point DSP IP Core User Guide 2. Getting Started 3. Functional Description A. Document Revision History for the Cyclone® 10 GX Native Fixed Point DSP IP Core User Guide
1. Intel® Cyclone® 10 GX Native Fixed Point DSP IP Core User Guide x
1.1. Cyclone® 10 GX Native Fixed Point DSP IP Core Features
2. Getting Started x
2.1. Cyclone® 10 GX Native Fixed Point DSP IP Core Parameter Settings
2.1. Cyclone® 10 GX Native Fixed Point DSP IP Core Parameter Settings x
2.1.1. Operation Mode Tab 2.1.2. Pre-adder Tab 2.1.3. Internal Coefficient Tab 2.1.4. Accumulator/Output Cascade Tab 2.1.5. Pipelining Tab 2.1.6. Maximum Input Data Width Per Operation Mode
3. Functional Description x
3.1. Operational Modes 3.2. Optional Modules 3.3. Clocking Scheme 3.4. Cyclone® 10 GX Native Fixed Point DSP IP Core Signals
3.1. Operational Modes x
3.1.1. The 18 × 18 Full Mode 3.1.2. The 18 × 18 Sum of 2 Mode 3.1.3. The 18 × 18 Plus 36 Mode 3.1.4. The 18 × 18 Systolic Mode 3.1.5. The 27 × 27 Mode
3.1.3. The 18 × 18 Plus 36 Mode x
3.1.3.1. Using Less Than 36-bit Operand In 18 × 18 Plus 36 Mode
3.2. Optional Modules x
3.2.1. Input Cascade 3.2.2. Pre-adder 3.2.3. Internal Coefficient 3.2.4. Accumulator and Output Cascade 3.2.5. Pipeline Register
1. Intel® Cyclone® 10 GX Native Fixed Point DSP IP Core User Guide
2. Getting Started
3. Functional Description
A. Document Revision History for the Cyclone® 10 GX Native Fixed Point DSP IP Core User Guide

2.1.5. Pipelining Tab

Table 5.  Pipelining Tab
Parameter IP Generated Parameter Value Description
Add input pipeline register to the input data signal (x/y/z/coefsel) input_pipeline_clock

No

Clock0

Clock1

Clock2

Select Clock0, Clock1, or Clock2 to enable and specify the input clock signal for x, y, z, coefsela and coefselb pipeline input registers.
Add input pipeline register to the 'sub' data signal sub_pipeline_clock

No

Clock0

Clock1

Clock2

Select Clock0, Clock1, or Clock2 to enable and specify the input clock signal for the sub pipeline input register. 2
Add input pipeline register to the 'accumulate' data signal accum_pipeline_clock

No

Clock0

Clock1

Clock2

Select Clock0, Clock1, or Clock2 to enable and specify the input clock signal for the accumulate pipeline input register.2
Add input pipeline register to the 'loadconst' data signal load_const_pipeline_clock

No

Clock0

Clock1

Clock2

Select Clock0, Clock1, or Clock2 to enable and specify the input clock signal for the loadconst pipeline input register.2
Add input pipeline register to the 'negate' data signal negate_pipeline_clock

No

Clock0

Clock1

Clock2

Select Clock0, Clock1, or Clock2 to enable and specify the input clock signal for the negate pipeline input register.2
2 All pipeline input registers for dynamic control signals must have the same clock setting.
Level Two Title