AN 509: Multiplexing SDIO Devices Using Altera MAX Series

ID 683683
Date 9/22/2014
Public

1.2.1. Design Demonstration on the MDN-B2 Demo Board

To demonstrate this design on the MDN-B2 demo board, perform the following steps:

  1. Turn on the power to the demo board (using slide switch SW1).
  2. Download the design onto the MAX II device through the JTAG header JP5 on the demo board and a conventional programming cable (ByteBlaster™ II or USB-Blaster™).
  3. Keep SW4 on the demo board pressed before and during the start of the programming process.
  4. Once completed, turn off the power and remove the JTAG connector.