Arria® 10 Transceiver PHY User Guide

ID 683617
Date 4/01/2024
Public
Document Table of Contents

8.6.1. XCVR_A10_TX_LINK

Pin planner or Assignment Editor Name

Transmitter Link Type

Description

This parameter is configured depending on the link characteristics. Value SR is used for link insertion loss less than or equal to 10dB and value LR is used for link insertion loss greater than 10dB. If this QSF assignment is not done, Quartus Prime assigns SR as the default value. This is used for data rate legality check during compilation.

Table 315.  Available Options

Value

Description

SR

Less than or equal to 10dB IL, used for Chip-to-chip communication

LR

> 10dB IL, used for Backplane communication

Note: The maximum data rate supported by transceiver channels depends on the device speed grade, power mode, and the type of transceiver channel. Refer to Arria 10 Device Datasheet for more details.

Assign To

TX serial data pin.

Syntax

set_instance_assignment -name XCVR_A10_TX_LINK <value> -to <tx_serial_data pin name>