Multi Channel DMA Intel® FPGA IP for PCI Express* Design Example User Guide

Download PDF
ID 683517
Date 10/06/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction 2. Design Example Detailed Description 3. Design Example Quick Start Guide 4. Multi Channel DMA Intel FPGA IP for PCI Express Design Example User Guide Archives 5. Revision History for the Multi Channel DMA Intel FPGA IP for PCI Express Design Example User Guide
1. Introduction x
1.1. Terms and Acronyms 1.2. MCDMA IP Modes
2. Design Example Detailed Description x
2.1. Design Example Overview 2.2. Hardware and Software Requirements 2.3. PIO using MCDMA Bypass Mode 2.4. Avalon-ST Packet Generate/Check 2.5. Avalon-ST Device-side Packet Loopback 2.6. Avalon-MM DMA 2.7. BAM_BAS Traffic Generator and Checker 2.8. External Descriptor Controller
2.1. Design Example Overview x
2.1.1. H-Tile MCDMA IP - Design Examples for Endpoint 2.1.2. P-Tile MCDMA IP - Design Examples for Endpoint 2.1.3. F-Tile MCDMA IP - Design Examples for Endpoint 2.1.4. R-Tile MCDMA IP - Design Examples for Endpoint
2.3. PIO using MCDMA Bypass Mode x
2.3.1. Avalon-ST PIO using MCDMA Bypass Mode 2.3.2. Avalon-MM PIO using MCDMA Bypass Mode
2.3.1. Avalon-ST PIO using MCDMA Bypass Mode x
2.3.1.1. Single-Port Avalon-ST PIO using MCDMA Bypass Mode
2.3.2. Avalon-MM PIO using MCDMA Bypass Mode x
2.3.2.1. Simulation Results 2.3.2.2. Hardware Test Results
2.4. Avalon-ST Packet Generate/Check x
2.4.1. Single-Port Avalon-ST Packet Generate/Check
2.4.1. Single-Port Avalon-ST Packet Generate/Check x
2.4.1.1. Simulation Waveforms 2.4.1.2. Simulation Log 2.4.1.3. Hardware Test Result
2.5. Avalon-ST Device-side Packet Loopback x
2.5.1. Simulation Results 2.5.2. Hardware Test Results
2.6. Avalon-MM DMA x
2.6.1. Simulation Results 2.6.2. Hardware Test Results
2.7. BAM_BAS Traffic Generator and Checker x
2.7.1. BAM_BAS Traffic Generator and Checker Example Design Register Map
2.8. External Descriptor Controller x
2.8.1. Registers 2.8.2. Hardware Test Results
2.8.1. Registers x
2.8.1.1. GCSR Registers (Base address 64’h00000) 2.8.1.2. QCSR Registers(Base address 64’h10000)
3. Design Example Quick Start Guide x
3.1. Design Example Directory Structure 3.2. Generating the Example Design using Intel® Quartus® Prime 3.3. Simulating the Design Example 3.4. Compiling the Example Design in Intel® Quartus® Prime 3.5. Running the Design Example Application on a Hardware Setup
3.2. Generating the Example Design using Intel® Quartus® Prime x
3.2.1. Procedure
3.3. Simulating the Design Example x
3.3.1. Testbench Overview 3.3.2. Supported Simulators 3.3.3. Example Testbench Flow for DMA Test with Avalon-ST Packet Generate/Check Design Example 3.3.4. Run the Simulation Script 3.3.5. Steps to Run the Simulation 3.3.6. View the Results
3.3.5. Steps to Run the Simulation x
3.3.5.1. Steps to Run the Simulation : QuestaSim* / Questa* Intel® FPGA Edition 3.3.5.2. Steps to Run the Simulation : VCS* / VCS* MX 3.3.5.3. Steps to Run the Simulation : Xcelium*
3.5. Running the Design Example Application on a Hardware Setup x
3.5.1. Program the FPGA 3.5.2. Quick Start Guide
3.5.2. Quick Start Guide x
3.5.2.1. Software Test Setup 3.5.2.2. Driver Support 3.5.2.3. MCDMA Custom Driver 3.5.2.4. MCDMA DPDK Poll Mode Driver 3.5.2.5. MCDMA Kernel Mode Network Device Driver
3.5.2.3. MCDMA Custom Driver x
3.5.2.3.1. Prerequisites 3.5.2.3.2. Software Setup 3.5.2.3.3. Run the Reference Example Application 3.5.2.3.4. Testing Bitstream Configuration beyond 256 Channels (for MCDMA Custom Driver) 3.5.2.3.5. External Descriptor Mode Verification
3.5.2.3.1. Prerequisites x
3.5.2.3.1.1. Configuration Changes from BIOS 3.5.2.3.1.2. External Packages 3.5.2.3.1.3. Set the Boot Parameters
3.5.2.3.2. Software Setup x
3.5.2.3.2.1. Installing the Linux Kernel Driver 3.5.2.3.2.2. Build and Install User Space Library 3.5.2.3.2.3. Enabling VFs and Create Guest VM by Using QEMU 3.5.2.3.2.4. Establish Communication Between Host and QEMU
3.5.2.3.3. Run the Reference Example Application x
3.5.2.3.3.1. Meta Data Test 3.5.2.3.3.2. Custom PIO Read Write Test 3.5.2.3.3.3. BAM Test 3.5.2.3.3.4. BAS Test 3.5.2.3.3.5. Packet Gen Test
3.5.2.4. MCDMA DPDK Poll Mode Driver x
3.5.2.4.1. Prerequisites 3.5.2.4.2. Install PMD and Test Application (for CentOS) 3.5.2.4.3. Install PMD and Test Application (for Ubuntu) 3.5.2.4.4. Create VM Environment 3.5.2.4.5. Run the Reference Example Application
3.5.2.4.1. Prerequisites x
3.5.2.4.1.1. Set the Boot Parameters 3.5.2.4.1.2. Configuration Changes from BIOS 3.5.2.4.1.3. Install and Build Testpmd
3.5.2.4.4. Create VM Environment x
3.5.2.4.4.1. Enable VFs 3.5.2.4.4.2. Create Guest VM by using QEMU 3.5.2.4.4.3. Establish Communication Between Host and VM
3.5.2.4.5. Run the Reference Example Application x
3.5.2.4.5.1. Channel ID VF PF Verification 3.5.2.4.5.2. Example of Verifying on an AVMM Design 3.5.2.4.5.3. Testing Bitstream Configuration beyond 256 Channels (for DPDK Poll Mode Driver) 3.5.2.4.5.4. BAM Test 3.5.2.4.5.5. BAS Test
3.5.2.5. MCDMA Kernel Mode Network Device Driver x
3.5.2.5.1. Build and Install Netdev Driver 3.5.2.5.2. Enable VFs if SRIOV is Supported 3.5.2.5.3. Configure the Number of Channels Supported on the Device 3.5.2.5.4. Configure the MTU Value 3.5.2.5.5. Configure the Device Communication 3.5.2.5.6. Configure Transmit Queue Selection Mechanism 3.5.2.5.7. Test Procedure by Using Name Space Environment 3.5.2.5.8. PIO Test
3.5.2.5.6. Configure Transmit Queue Selection Mechanism x
3.5.2.5.6.1. MCDMA Queue Selection 3.5.2.5.6.2. Transmit Packet Steering (XPS) 3.5.2.5.6.3. Default
1. Introduction
2. Design Example Detailed Description
3. Design Example Quick Start Guide
4. Multi Channel DMA Intel FPGA IP for PCI Express Design Example User Guide Archives
5. Revision History for the Multi Channel DMA Intel FPGA IP for PCI Express Design Example User Guide

5. Revision History for the Multi Channel DMA Intel FPGA IP for PCI Express Design Example User Guide

Date Intel® Quartus® Prime Version IP Version Changes
2023.10.06 23.3

[H-Tile: 23.0.0]

[P-Tile: 7.0.0]

[F-Tile: 7.0.0]

[R-Tile: 4.0.0]
2023.07.07 23.2

[H-Tile: 22.3.0]

[P-Tile: 6.0.0]

[F-Tile: 6.0.0]

[R-Tile: 3.0.0]
  • MCDMA IP Modes: R-Tile information added
  • MCDMA R-Tile Design Examples for Endpoint: Information updated
  • Simulation Results: Simulation log and Simulation waveforms added
  • Testbench Overview: R-Tile information added
  • Supported Simulators: Aldec Riviera Pro simulator information added
  • Supported Simulators: R-Tile information added
  • Set the Boot Parameters: Commands updated
  • Installing the Linux Kernel Driver: Notes added
  • Establish Communication Between Host and QEMU: Macro command updated
  • Run the Reference Example Application: Note added about data validation
  • Set the Boot Parameters: Commands updated
  • Install PMD and Test Application (for Ubuntu): New command added in Step (5)
  • Create Guest VM by using QEMU: Information added about creating the centOS VMs and Ubuntu VMs
2023.04.17 23.1

[H-Tile: 22.2.0]

[P-Tile: 5.1.0]

[F-Tile: 5.1.0]

[R-Tile: 2.0.0]

  • Updated product family name to "Intel Agilex® 7".
  • MCDMA R-Tile Design Examples for Endpoint: DPDK Driver Support information added to the table
  • MCDMA R-Tile Design Examples for Endpoint: External Descriptor Controller information added to the table
  • Hardware and Software Requirements: Operating system information added
  • Testbench Overview: MCDMA R-Tile Testbench information added
  • Supported Simulators: New table added Supported Simulators for MCDMA IP R-Tile
  • Run the Simulation Script: Table Steps to Run the Simulation removed
  • Software Test Setup: Operating System information updated
  • Set the Boot Parameters: CentOS and Ubuntu information added
  • Enabling VFs and Create Guest VM by Using QEMU: Host System Configuration table updated with operating system information
  • Run the Reference Example Application:
    • Note added in Step (5)
    • Custom AVMM DMA Gen4 x16 : P-Tile Hardware Test Result: New screeenshot added
  • BAS Test: BAS x4 information added
  • Testing Bitstream Configuration beyond 256 Channels (for MCDMA Custom Driver): Note added in Step (4)
  • Prerequisites: OS version and packages to be installed added
  • Set the Boot Parameters: CentOS and Ubuntu information added
  • Install and Build Testpmd: Note added about Ubuntu support
  • Install PMD and Test Application (for Ubuntu): New section added
  • Testing Bitstream Configuration beyond 256 Channels (for DPDK Poll Mode Driver): New section added
  • BAM Test: Note added about BAM_BAS bitstream
  • BAS Test: Note added about DPDK
2023.02.14 22.4

[H-Tile: 22.1.0]

[P-Tile: 5.0.0]

[F-Tile: 5.0.0]

[R-Tile: 1.0.0]
  • Kernel mode char driver is no longer supported. MCDMA Kernel Mode Character Device Driver section removed. All other Chardev driver information also removed.
  • MCDMA R-Tile information added in the following sections:
    • MCDMA IP Modes
    • Design Example Overview
    • Hardware and Software Requirements
  • MCDMA R-Tile Design Examples for Endpoint: New section added
  • BAM+BAS+MCDMA User Mode support information added in following sections:
    • MCDMA H-Tile Design Examples for Endpoint
    • MCDMA P-Tile Design Examples for Endpoint
    • MCDMA F-Tile Design Examples for Endpoint
    • Driver Support
    • Supported Simulators
  • Hardware and Software Requirements: Development Kit information updated
  • Procedure: Step (7) updated
  • Running the Design Example Application on a Hardware Setup: Development Kit information updated
  • Program the FPGA: Note added
  • Software Test Setup: Information added to run custom driver with Ubuntu 22.04
  • External Packages: Commands added for CentOS and Ubuntu. Note added in Step (1)
  • BAS Verification: Note added about running BAM+BAS+MCDMA
  • Testing Bitstream Configuration beyond 256 Channels: Note added in Step (1)
2022.10.28 22.3

H-Tile IP version: 22.0.0

P-Tile IP version: 4.0.0

F-Tile IP version: 4.0.0
  • MCDMA IP Modes: Table MCDMA IP Modes and FPGA Development Kit for Design Examples updated for P-Tile and F-Tile rows
  • Kernel Mode Driver Support removed for Device-side Packet Loopback Design Example in
    • MCDMA H-Tile Design Examples for Endpoint
    • MCDMA P-Tile Design Examples for Endpoint
  • MCDMA F-Tile Design Examples for Endpoint: Table updated MCDMA F-Tile Design Examples for Endpoint
  • Hardware and Software Requirements: Intel® Quartus® Prime version and Development Kit support information updated
  • Hardware Test Results: Figure Performance Test: P-Tile updated
  • Hardware Test Results: Command updated in Data Validation Test
  • Hardware Test Results: Command added to enable external flag IFC_MCDMA_EXTERNL_DESC
  • Supported Simulators: QuestaSim* and Questa* Intel® FPGA Edition are not supported in Intel® Quartus® Prime 22.3 version for MCDMA P-Tile IP. Table Supported Simulators for MCDMA IP P-Tile updated to reflect this change.
  • Set the Boot Parameters: Command in Step 6(b) updated
  • Installing the Linux Kernel Driver: Command in Step 2(b) updated
  • Enabling VFs and Create Guest VM by Using QEMU: Command in step 3(b) updated
  • Meta Data Test: Command added in Step (1) for __cflags
  • Meta Data Test: Command updated in Step (3)
  • BAS Verification: Command added to enable BAS in common.mk
  • Packet Gen Test: Command updated to run the perfq_app application in Step (3)
  • External Descriptor Mode Verification: Command in Step (1) updated
  • Install PMD and Test Application: Description to enable VFIO added in Step (2)
  • Install PMD and Test Application: Description to install VFIO module and bind vfio-pci driver added in Step (4)
  • Create Guest VM by using QEMU: Commands updated in Step 3(b)
  • Testing Bitstream Configuration beyond 256 Channels: Command for pktgen updated
  • BAS Test: Command added to enable the config IFC_QDMA_INTF_AVST
2022.08.24 22.2

H-Tile IP version: 21.5.0

P-Tile IP version: 3.1.0

F-Tile IP version: 3.0.0
  • Device-side Packet Loopback and Packet Generate/Check User Mode updated to BAM+MCDMA for the following topics
    • MCDMA H-Tile Design Examples for Endpoint
    • MCDMA F-Tile Design Examples for Endpoint
  • Device-side Packet Loopback and Packet Generate/Check User Mode updated to BAM+BAS for MCDMA P-Tile Design Examples for Endpoint
  • Hardware Test Results: Hardware test result added for Avalon-MM PIO using MCDMA Bypass Mode
  • Single-Port Avalon-ST PIO Using MCDMA Bypass Mode: Description updated
  • Simulation Waveforms: Added for Single-Port Avalon-ST Packet Generate/Check
  • Simulation Log: Added for Single-Port Avalon-ST Packet Generate/Check
  • Hardware Test Result: Added for Single-Port Avalon-ST Packet Generate/Check
  • Avalon-ST Device-side Packet Loopback: Description updated
  • Simulation Results: Updated for Avalon-ST Device-side Packet Loopback
  • Hardware Test Results: Updated for Avalon-ST Device-side Packet Loopback
  • Hardware Test Results: Intel Agilex F-Series P-Tile PCIe Gen4 x16 added for Avalon-MM DMA
  • Device-side Packet Loopback and Packet Generate/Check User Mode updated to BAM+MCDMA for all tables in Supported Simulators
  • BAS Test: Note added
  • BAS Verification: Commands updated for all operations
  • Example of Verifying on an AVMM Design: Commands updated
  • BAM Test: Commands updated in all steps
  • BAS Test: Commands and Result screenshots updated for all operations
4 Port AVST Mode has been deprecated from this release. All related 4 Port Mode information has been removed from the following sections:
  • Design Example Overview
  • MCDMA H-Tile Design Examples for Endpoint
  • MCDMA P-Tile Design Examples for Endpoint
  • MCDMA F-Tile Design Examples for Endpoint
  • Avalon-ST Device-side Packet Loopback
  • Example Testbench Flow for DMA Test with Packet Generate/Check Design Example
  • Driver Support
2022.04.29 22.1

H-Tile IP version: 21.4.0

P-Tile IP version: 3.0.0

F-Tile IP version: 2.0.0
Sections Updated:
  • MCDMA IP Modes [Note added]
  • MCDMA H-Tile Design Examples for Endpoint [New section added]
  • MCDMA P-Tile Design Examples for Endpoint [New section added]
  • MCDMA F-Tile Design Examples for Endpoint [New section added]
  • Hardware and Software Requirements [Version updated]
  • Single-Port Avalon-ST PIO Using MCDMA Bypass Mode [Figure Title updated]
  • Avalon-MM PIO Using MCDMA Bypass mode [Figure Title updated]
  • Hardware Test Results [Note added]
  • BAM_BAS Traffic Generator and Checker [Section title updated]
  • External Descriptor Controller [Description updated and High Level Block Diagram added]
  • Hardware Test Results [Example Design Test Result image updated]
  • Design Example Directory Structure [kmod folder structure updated]
  • Supported Simulators [New Tables added]
  • Run the Simulation Script [Table updated]
  • Running the Design Example Application on a Hardware Setup [Development kit support and Note added]
  • Driver Support [Driver Support for MCDMA Design Examples Table updated]
  • BAS Programming Sequence [Steps updated]
  • Run the Reference Example Application [Test Result image added]
  • Run the Reference Example Application [Test Result image added]
  • Examples [Note added]
2022.02.06 21.4

H-Tile IP version: 21.3.0

P-Tile IP version: 2.2.0

F-Tile IP version: 1.1.0
  • Added new design example: External Descriptor Controller
  • Added information for the Traffic Generator/Checker example design in Supported Simulators
2021.12.01 21.3

H-Tile IP version: 21.2.0

P-Tile IP version: 2.1.0

F-Tile IP version: 1.0.0

Rev H-Tile 21.2.0—2K channel support for D2H

Rev P-Tile 2.1.0—CS address width reduced from 29 to 14 bits

Rev F-Tile 1.0.0:
  • F-Tile support added
  • BAS EP design example added

Added new design example: Traffic Generator/Tracker

2021.09.15 21.2

H-Tile IP version: 21.1.0

P-Tile IP version: 2.0.0
  • Added SRIOV support for DPDK PMD
  • Added support for kernel mode driver
  • Added the Multi Channel DMA for FPGA IP Design Example User Guide Archives section
2021.05.24 21.1

H-Tile IP version: 2.0.0

P-Tile IP version: 1.0.0
  • Added the single-port Avalon-ST design example
  • Added support for new BAM, BAS, BAM+BAS, and BAM+MCDMA user modes
  • Added support for the DPDK PMD driver
  • Added support for the Xcelium simulator
2020.08.05 20.2

H-Tile IP version: 20.0.0

 Initial Release
Level Two Title