Visible to Intel only — GUID: ibb1540539071824
Ixiasoft
Serial Flash Mailbox Client IP Modules
Device Family Support
Signals
Register Map
Response Codes
Using the Serial Flash Mailbox Client Intel® FPGA IP
Design Example
Serial Flash Mailbox Client Intel FPGA IP Core User Guide Archives
Document Revision History for the Serial Flash Mailbox Client Intel FPGA IP User Guide
Prerequisites
Generating the Configuration Bitstream
Programming the Flash Memory with the Configuration Bitstream
Reading the Flash Memory Device Status Register
Reading the Flash Memory Device ID
Reading the Flash Memory Device ID Using the Control Command
Erasing Flash Memory
Reading Flash Memory
Writing Flash Memory
Visible to Intel only — GUID: ibb1540539071824
Ixiasoft
Reading the Flash Memory Device ID
Here are the steps to read the Device ID from a flash memory device:
# Write Offset 4 to request access to the flash memory device.
master_write_32 $m $AsmiOpen 0x1
# Write Offset 3 to select the 1st flash memory device attached to the IP.
master_write_32 $m $AsmiChipSelect 0x0
# Read Offset 10 to obtain the device ID.
master_read_32 $m $AsmiDeviceId 1
# Write Offset 5 to close access to the flash memory device.
master_write_32 $m $AsmiClose 0x1