SDI II Intel® Stratix 10 FPGA IP Design Example User Guide

Download PDF
ID 683368
Date 10/08/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. SDI II Intel® FPGA IP Design Example Quick Start Guide 2. SDI II Intel® FPGA IP Design Example Detailed Description 3. SDI II Intel® Stratix® 10 FPGA IP Design Example User Guide Archives 4. Document Revision History for the SDI II Intel® Stratix® 10 FPGA IP Design Example User Guide
1. SDI II Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. SDI II Intel® FPGA Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Connection and Settings Guidelines 1.5.2. Design Considerations
2. SDI II Intel® FPGA IP Design Example Detailed Description x
2.1. Parallel Loopback Design Examples 2.2. Serial Loopback Design Examples 2.3. Design Components 2.4. Clocking Scheme Signals 2.5. Interface Signals 2.6. Video Pattern Generator Parameters 2.7. Hardware Setup 2.8. Simulation Testbench 2.9. Upgrading Your Design
1. SDI II Intel® FPGA IP Design Example Quick Start Guide
2. SDI II Intel® FPGA IP Design Example Detailed Description
3. SDI II Intel® Stratix® 10 FPGA IP Design Example User Guide Archives
4. Document Revision History for the SDI II Intel® Stratix® 10 FPGA IP Design Example User Guide

2.9. Upgrading Your Design

When you upgrade your designs to a later version, you may have to add, remove, or edit some of the generated files.

Upgrading from Previous Versions of the Intel® Quartus® Prime Pro Edition Software

  1. Click IP Upgrade to upgrade all the IP and Platform Designer files.
  2. If you have triple-rate or multi-rate designs, update all the Native PHY config files location to the latest version in the simulation run script. For example, in the mentor.do file, update the version as in the following line:
    vlog -sv \$USER_DEFINED_VERILOG_COMPILE_OPTIONS  "\$QSYS_SIMDIR/../rtl/du/sdi_rx_phy/altera_xcvr_native_a10_<version>/
sim/reconfig/altera_xcvr_native_a10_reconfig_parameters_CFG0.sv"
    Note: You should be able to find the updated Native PHY library path in the specified folder indicated in the line.
  3. Generate the same design example configuration in the new Intel® Quartus® Prime release version.
  4. Compare the whole design example directory; replace the files that have changes with the new files and copy over the new files to your existing design.
Level Two Title