Arria V GZ Avalon-ST Interface for PCIe Solutions: User Guide

Download PDF
ID 683297
Date 12/21/2020
Public
Document Table of Contents
Document Table of Contents x
1. Datasheet 2. Getting Started with the Arria® V GZ Hard IP for PCI Express 3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design 4. Parameter Settings 5. Interfaces and Signal Descriptions 6. Registers 7. Interrupts 8. Error Handling 9. PCI Express Protocol Stack 10. Transaction Layer Protocol (TLP) Details 11. Throughput Optimization 12. Design Implementation 13. Additional Features 14. Hard IP Reconfiguration 15. Transceiver PHY IP Reconfiguration 16. Testbench and Design Example 17. Debugging A. Lane Initialization and Reversal B. Document Revision History
1. Datasheet x
1.1. Arria® V GZ Avalon-ST Interface for PCIe Datasheet 1.2. Release Information 1.3. Device Family Support 1.4. Configurations 1.5. Avalon-ST Example Designs 1.6. Debug Features 1.7. IP Core Verification 1.8. Resource Utilization 1.9. Recommended Speed Grades 1.10. Creating a Design for PCI Express
1.1. Arria® V GZ Avalon-ST Interface for PCIe Datasheet x
1.1.1. Features
1.7. IP Core Verification x
1.7.1. Compatibility Testing Environment
2. Getting Started with the Arria® V GZ Hard IP for PCI Express x
2.1. Qsys Design Flow
2.1. Qsys Design Flow x
2.1.1. Generating the Testbench 2.1.2. Simulating the Example Design 2.1.3. Generating Synthesis Files 2.1.4. Understanding the Files Generated 2.1.5. Understanding Simulation Log File Generation 2.1.6. Understanding Physical Placement of the PCIe IP Core 2.1.7. Compiling the Design in the Qsys Design Flow 2.1.8. Modifying the Example Design 2.1.9. Using the IP Catalog To Generate Your Arria® V GZ Hard IP for PCI Express as a Separate Component
3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design x
3.1. Copying the Configuration Space Bypass Mode Example Design 3.2. Generating the Qsys System 3.3. Simulating the Example Design
3.2. Generating the Qsys System x
3.2.1. Generating Synthesis Files 3.2.2. Understanding the Generated Files 3.2.3. Understanding Simulation Log File Generation
3.3. Simulating the Example Design x
3.3.1. Timing for Configuration Read to Function 0 for the 256-Bit Avalon-ST Interface 3.3.2. Timing for Configuration Write to Function 0 for the 256-Bit Avalon-ST Interface 3.3.3. Timing for Memory Write and Read of Function 1 256-Bit Avalon-ST Interface 3.3.4. Partial Transcript for Configuration Space Bypass Simulation
4. Parameter Settings x
4.1. System Settings 4.2. Base Address Register (BAR) and Expansion ROM Settings 4.3. Base and Limit Registers for Root Ports 4.4. Device Identification Registers 4.5. PCI Express and PCI Capabilities Parameters 4.6. Vendor Specific Extended Capability (VSEC) 4.7. PHY Characteristics
4.5. PCI Express and PCI Capabilities Parameters x
4.5.1. PCI Express and PCI Capabilities 4.5.2. Error Reporting 4.5.3. Link Capabilities 4.5.4. MSI and MSI-X Capabilities 4.5.5. Slot Capabilities 4.5.6. Power Management
5. Interfaces and Signal Descriptions x
5.1. Clock Signals 5.2. Reset, Status, and Link Training Signals 5.3. ECRC Forwarding 5.4. Error Signals 5.5. Interrupts for Endpoints 5.6. Interrupts for Root Ports 5.7. Completion Side Band Signals 5.8. Configuration Space Bypass Mode Interface Signals 5.9. Parity Signals 5.10. LMI Signals 5.11. Transaction Layer Configuration Space Signals 5.12. Hard IP Reconfiguration Interface 5.13. Power Management Signals 5.14. Physical Layer Interface Signals
5.11. Transaction Layer Configuration Space Signals x
5.11.1. Configuration Space Register Access Timing 5.11.2. Configuration Space Register Access
5.14. Physical Layer Interface Signals x
5.14.1. Transceiver Reconfiguration 5.14.2. Serial Data Signals 5.14.3. PIPE Interface Signals 5.14.4. Test Signals
5.14.2. Serial Data Signals x
5.14.2.1. Physical Layout of Hard IP in Arria V GZ Devices 5.14.2.2. Channel Placement in Arria V GZ and Stratix V GX/GT/GS Devices
6. Registers x
6.1. Correspondence between Configuration Space Registers and the PCIe Specification 6.2. Type 0 Configuration Space Registers 6.3. Type 1 Configuration Space Registers 6.4. PCI Express Capability Structures 6.5. Intel-Defined VSEC Registers 6.6. CvP Registers 6.7. Uncorrectable Internal Error Mask Register 6.8. Uncorrectable Internal Error Status Register 6.9. Correctable Internal Error Mask Register 6.10. Correctable Internal Error Status Register
7. Interrupts x
7.1. Interrupts for Endpoints 7.2. Interrupts for Root Ports
7.1. Interrupts for Endpoints x
7.1.1. MSI and Legacy Interrupts 7.1.2. MSI-X 7.1.3. Implementing MSI-X Interrupts 7.1.4. Legacy Interrupts
8. Error Handling x
8.1. Physical Layer Errors 8.2. Data Link Layer Errors 8.3. Transaction Layer Errors 8.4. Error Reporting and Data Poisoning 8.5. Uncorrectable and Correctable Error Status Bits
9. PCI Express Protocol Stack x
9.1. Top-Level Interfaces 9.2. Transaction Layer 9.3. Data Link Layer 9.4. Physical Layer
9.1. Top-Level Interfaces x
9.1.1. Avalon-ST Interface 9.1.2. Clocks and Reset 9.1.3. Local Management Interface (LMI Interface) 9.1.4. Hard IP Reconfiguration 9.1.5. Transceiver Reconfiguration 9.1.6. Interrupts 9.1.7. PIPE
9.2. Transaction Layer x
9.2.1. Configuration Space 9.2.2. Configuration Space Bypass Mode
10. Transaction Layer Protocol (TLP) Details x
10.1. Supported Message Types 10.2. Transaction Layer Routing Rules 10.3. Receive Buffer Reordering
10.1. Supported Message Types x
10.1.1. INTX Messages 10.1.2. Power Management Messages 10.1.3. Error Signaling Messages 10.1.4. Locked Transaction Message 10.1.5. Slot Power Limit Message 10.1.6. Vendor-Defined Messages 10.1.7. Hot Plug Messages
10.3. Receive Buffer Reordering x
10.3.1. Using Relaxed Ordering
11. Throughput Optimization x
11.1. Throughput of Posted Writes 11.2. Throughput of Non-Posted Reads
12. Design Implementation x
12.1. Making Analog QSF Assignments Using the Assignment Editor 12.2. Making Pin Assignments to Assign I/O Standard to Serial Data Pins 12.3. Recommended Reset Sequence to Avoid Link Training Issues 12.4. SDC Timing Constraints
13. Additional Features x
13.1. Configuration over Protocol (CvP) 13.2. Autonomous Mode 13.3. ECRC
13.2. Autonomous Mode x
13.2.1. Enabling Autonomous Mode 13.2.2. Enabling CvP Initialization
13.3. ECRC x
13.3.1. ECRC on the RX Path 13.3.2. ECRC on the TX Path
15. Transceiver PHY IP Reconfiguration x
15.1. Connecting the Transceiver Reconfiguration Controller IP Core 15.2. Transceiver Reconfiguration Controller Connectivity for Designs Using CvP
16. Testbench and Design Example x
16.1. Endpoint Testbench 16.2. Root Port Testbench 16.3. Test Driver Module 16.4. Root Port Design Example 16.5. Root Port BFM Overview 16.6. BFM Procedures and Functions 16.7. Setting Up Simulation
16.1. Endpoint Testbench x
16.1.1. Endpoint Testbench for SR-IOV
16.5. Root Port BFM Overview x
16.5.1. BFM Memory Map 16.5.2. Configuration Space Bus and Device Numbering 16.5.3. Configuration of Root Port and Endpoint 16.5.4. Issuing Read and Write Transactions to the Application Layer
16.6. BFM Procedures and Functions x
16.6.1. ebfm_barwr Procedure 16.6.2. ebfm_barwr_imm Procedure 16.6.3. ebfm_barrd_wait Procedure 16.6.4. ebfm_barrd_nowt Procedure 16.6.5. ebfm_cfgwr_imm_wait Procedure 16.6.6. ebfm_cfgwr_imm_nowt Procedure 16.6.7. ebfm_cfgrd_wait Procedure 16.6.8. ebfm_cfgrd_nowt Procedure 16.6.9. BFM Configuration Procedures 16.6.10. BFM Shared Memory Access Procedures 16.6.11. BFM Log and Message Procedures 16.6.12. Verilog HDL Formatting Functions
16.6.9. BFM Configuration Procedures x
16.6.9.1. ebfm_cfg_rp_ep Procedure 16.6.9.2. ebfm_cfg_decode_bar Procedure
16.6.10. BFM Shared Memory Access Procedures x
16.6.10.1. Shared Memory Constants 16.6.10.2. shmem_write Task 16.6.10.3. shmem_read Function 16.6.10.4. shmem_display Verilog HDL Function 16.6.10.5. shmem_fill Procedure 16.6.10.6. shmem_chk_ok Function
16.6.11. BFM Log and Message Procedures x
16.6.11.1. ebfm_display Verilog HDL Function 16.6.11.2. ebfm_log_stop_sim Verilog HDL Function 16.6.11.3. ebfm_log_set_suppressed_msg_mask Task 16.6.11.4. ebfm_log_set_stop_on_msg_mask Verilog HDL Task 16.6.11.5. ebfm_log_open Verilog HDL Function 16.6.11.6. ebfm_log_close Verilog HDL Function
16.6.12. Verilog HDL Formatting Functions x
16.6.12.1. himage1 16.6.12.2. himage2 16.6.12.3. himage4 16.6.12.4. himage8 16.6.12.5. himage16 16.6.12.6. dimage1 16.6.12.7. dimage2 16.6.12.8. dimage3 16.6.12.9. dimage4 16.6.12.10. dimage5 16.6.12.11. dimage6 16.6.12.12. dimage7
16.7. Setting Up Simulation x
16.7.1. Changing Between Serial and PIPE Simulation 16.7.2. Using the PIPE Interface for Gen1 and Gen2 Variants 16.7.3. Viewing the Important PIPE Interface Signals 16.7.4. Disabling the Scrambler for Gen1 and Gen2 Simulations 16.7.5. Disabling 8B/10B Encoding and Decoding for Gen1 and Gen2 Simulations 16.7.6. Changing between the Hard and Soft Reset Controller
17. Debugging x
17.1. Hardware Bring-Up Issues 17.2. Link Training 17.3. Use Third-Party PCIe Analyzer 17.4. BIOS Enumeration Issues
17.2. Link Training x
17.2.1. Debugging Link that Fails To Reach L0 17.2.2. Link Hangs in L0 State
B. Document Revision History x
B.1. Document Revision History of the Arria® V GZ Avalon® Streaming (Avalon-ST) Interface for PCIe* Solutions User Guide
1. Datasheet
2. Getting Started with the Arria® V GZ Hard IP for PCI Express
3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design
4. Parameter Settings
5. Interfaces and Signal Descriptions
6. Registers
7. Interrupts
8. Error Handling
9. PCI Express Protocol Stack
10. Transaction Layer Protocol (TLP) Details
11. Throughput Optimization
12. Design Implementation
13. Additional Features
14. Hard IP Reconfiguration
15. Transceiver PHY IP Reconfiguration
16. Testbench and Design Example
17. Debugging
A. Lane Initialization and Reversal
B. Document Revision History

5.13. Power Management Signals

Table 40.  Power Management Signals

Signal

Direction

Description

pme_to_cr

Input

Power management turn off control register.

Root Port—When this signal is asserted, the Root Port sends the PME_turn_off message.

Endpoint—This signal is asserted to acknowledge the PME_turn_off message by sending pme_to_ack to the Root Port.

pme_to_sr

Output

Power management turn off status register.

Root Port—This signal is asserted for 1 clock cycle when the Root Port receives the pme_turn_off acknowledge message.

Endpoint—This signal is asserted for 1 cycle when the Endpoint receives the PME_turn_off message from the Root Port.

pm_event

Input

Power Management Event. This signal is only available for Endpoints.

The Endpoint initiates a a power_management_event message (PM_PME) that is sent to the Root Port. If the Hard IP is in a low power state, the link exits from the low-power state to send the message. This signal is positive edge-sensitive.

pm_data[9:0]

Input

Power Management Data.

This bus indicates power consumption of the component. This bus can only be implemented if all three bits of AUX_power (part of the Power Management Capabilities structure) are set to 0. This bus includes the following bits:

  • pm_data[9:2]: Data Register: This register maintains a value associated with the power consumed by the component. (Refer to the example below)
  • pm_data[1:0]: Data Scale: This register maintains the scale used to find the power consumed by a particular component and can include the following values:
  • 2b’00: unknown
  • 2b’01: 0.1 ×
  • 2b’10: 0.01 ×
  • 2b’11: 0.001 ×

For example, the two registers might have the following values:

  • pm_data[9:2]: b’1110010 = 114
  • pm_data[1:0]: b’10, which encodes a factor of 0.01

To find the maximum power consumed by this component, multiply the data value by the data Scale (114 × .01 = 1.14). 1.14 watts is the maximum power allocated to this component in the power state selected by the data_select field.

pm_auxpwr

Input

Power Management Auxiliary Power: This signal can be tied to 0 because the L2 power state is not supported.

Figure 25. Layout of Power Management Capabilities Register
Table 41.   Power Management Capabilities Register Field Descriptions

Bits

Field

Description

[31:24]

Data register

This field indicates in which power states a function can assert the PME# message.

[23:16]

reserved

—

[15]

PME_status

When set to 1, indicates that the function would normally assert the PME# message independently of the state of the PME_en bit.

[14:13]

data_scale

This field indicates the scaling factor when interpreting the value retrieved from the data register. This field is read-only.

[12:9]

data_select

This field indicates which data should be reported through the data register and the data_scale field.

[8]

PME_EN

1: indicates that the function can assert PME#0: indicates that the function cannot assert PME#

[7:2]

reserved

—

[1:0]

PM_state

Specifies the power management state of the operating condition being described. The following encodings are defined:

  • 2b’00 D0
  • 2b’01 D1
  • 2b’10 D2
  • 2b’11 D3

A device returns 2b’11 in this field and Aux or PME Aux in the type register to specify the D3-Cold PM state. An encoding of 2b’11 along with any other type register value specifies the D3-Hot state.

Figure 26. pme_to_sr and pme_to_cr in an Endpoint IP core The following figure illustrates the behavior of pme_to_sr and pme_to_cr in an Endpoint. First, the Hard IP receives the PME_turn_off message which causes pme_to_sr to assert. Then, the Application Layer sends the PME_to_ack message to the Root Port by asserting pme_to_cr.
Level Two Title