Arria V GZ Avalon-ST Interface for PCIe Solutions: User Guide

Download PDF
ID 683297
Date 12/21/2020
Public
Document Table of Contents
Document Table of Contents x
1. Datasheet 2. Getting Started with the Arria® V GZ Hard IP for PCI Express 3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design 4. Parameter Settings 5. Interfaces and Signal Descriptions 6. Registers 7. Interrupts 8. Error Handling 9. PCI Express Protocol Stack 10. Transaction Layer Protocol (TLP) Details 11. Throughput Optimization 12. Design Implementation 13. Additional Features 14. Hard IP Reconfiguration 15. Transceiver PHY IP Reconfiguration 16. Testbench and Design Example 17. Debugging A. Lane Initialization and Reversal B. Document Revision History
1. Datasheet x
1.1. Arria® V GZ Avalon-ST Interface for PCIe Datasheet 1.2. Release Information 1.3. Device Family Support 1.4. Configurations 1.5. Avalon-ST Example Designs 1.6. Debug Features 1.7. IP Core Verification 1.8. Resource Utilization 1.9. Recommended Speed Grades 1.10. Creating a Design for PCI Express
1.1. Arria® V GZ Avalon-ST Interface for PCIe Datasheet x
1.1.1. Features
1.7. IP Core Verification x
1.7.1. Compatibility Testing Environment
2. Getting Started with the Arria® V GZ Hard IP for PCI Express x
2.1. Qsys Design Flow
2.1. Qsys Design Flow x
2.1.1. Generating the Testbench 2.1.2. Simulating the Example Design 2.1.3. Generating Synthesis Files 2.1.4. Understanding the Files Generated 2.1.5. Understanding Simulation Log File Generation 2.1.6. Understanding Physical Placement of the PCIe IP Core 2.1.7. Compiling the Design in the Qsys Design Flow 2.1.8. Modifying the Example Design 2.1.9. Using the IP Catalog To Generate Your Arria® V GZ Hard IP for PCI Express as a Separate Component
3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design x
3.1. Copying the Configuration Space Bypass Mode Example Design 3.2. Generating the Qsys System 3.3. Simulating the Example Design
3.2. Generating the Qsys System x
3.2.1. Generating Synthesis Files 3.2.2. Understanding the Generated Files 3.2.3. Understanding Simulation Log File Generation
3.3. Simulating the Example Design x
3.3.1. Timing for Configuration Read to Function 0 for the 256-Bit Avalon-ST Interface 3.3.2. Timing for Configuration Write to Function 0 for the 256-Bit Avalon-ST Interface 3.3.3. Timing for Memory Write and Read of Function 1 256-Bit Avalon-ST Interface 3.3.4. Partial Transcript for Configuration Space Bypass Simulation
4. Parameter Settings x
4.1. System Settings 4.2. Base Address Register (BAR) and Expansion ROM Settings 4.3. Base and Limit Registers for Root Ports 4.4. Device Identification Registers 4.5. PCI Express and PCI Capabilities Parameters 4.6. Vendor Specific Extended Capability (VSEC) 4.7. PHY Characteristics
4.5. PCI Express and PCI Capabilities Parameters x
4.5.1. PCI Express and PCI Capabilities 4.5.2. Error Reporting 4.5.3. Link Capabilities 4.5.4. MSI and MSI-X Capabilities 4.5.5. Slot Capabilities 4.5.6. Power Management
5. Interfaces and Signal Descriptions x
5.1. Clock Signals 5.2. Reset, Status, and Link Training Signals 5.3. ECRC Forwarding 5.4. Error Signals 5.5. Interrupts for Endpoints 5.6. Interrupts for Root Ports 5.7. Completion Side Band Signals 5.8. Configuration Space Bypass Mode Interface Signals 5.9. Parity Signals 5.10. LMI Signals 5.11. Transaction Layer Configuration Space Signals 5.12. Hard IP Reconfiguration Interface 5.13. Power Management Signals 5.14. Physical Layer Interface Signals
5.11. Transaction Layer Configuration Space Signals x
5.11.1. Configuration Space Register Access Timing 5.11.2. Configuration Space Register Access
5.14. Physical Layer Interface Signals x
5.14.1. Transceiver Reconfiguration 5.14.2. Serial Data Signals 5.14.3. PIPE Interface Signals 5.14.4. Test Signals
5.14.2. Serial Data Signals x
5.14.2.1. Physical Layout of Hard IP in Arria V GZ Devices 5.14.2.2. Channel Placement in Arria V GZ and Stratix V GX/GT/GS Devices
6. Registers x
6.1. Correspondence between Configuration Space Registers and the PCIe Specification 6.2. Type 0 Configuration Space Registers 6.3. Type 1 Configuration Space Registers 6.4. PCI Express Capability Structures 6.5. Intel-Defined VSEC Registers 6.6. CvP Registers 6.7. Uncorrectable Internal Error Mask Register 6.8. Uncorrectable Internal Error Status Register 6.9. Correctable Internal Error Mask Register 6.10. Correctable Internal Error Status Register
7. Interrupts x
7.1. Interrupts for Endpoints 7.2. Interrupts for Root Ports
7.1. Interrupts for Endpoints x
7.1.1. MSI and Legacy Interrupts 7.1.2. MSI-X 7.1.3. Implementing MSI-X Interrupts 7.1.4. Legacy Interrupts
8. Error Handling x
8.1. Physical Layer Errors 8.2. Data Link Layer Errors 8.3. Transaction Layer Errors 8.4. Error Reporting and Data Poisoning 8.5. Uncorrectable and Correctable Error Status Bits
9. PCI Express Protocol Stack x
9.1. Top-Level Interfaces 9.2. Transaction Layer 9.3. Data Link Layer 9.4. Physical Layer
9.1. Top-Level Interfaces x
9.1.1. Avalon-ST Interface 9.1.2. Clocks and Reset 9.1.3. Local Management Interface (LMI Interface) 9.1.4. Hard IP Reconfiguration 9.1.5. Transceiver Reconfiguration 9.1.6. Interrupts 9.1.7. PIPE
9.2. Transaction Layer x
9.2.1. Configuration Space 9.2.2. Configuration Space Bypass Mode
10. Transaction Layer Protocol (TLP) Details x
10.1. Supported Message Types 10.2. Transaction Layer Routing Rules 10.3. Receive Buffer Reordering
10.1. Supported Message Types x
10.1.1. INTX Messages 10.1.2. Power Management Messages 10.1.3. Error Signaling Messages 10.1.4. Locked Transaction Message 10.1.5. Slot Power Limit Message 10.1.6. Vendor-Defined Messages 10.1.7. Hot Plug Messages
10.3. Receive Buffer Reordering x
10.3.1. Using Relaxed Ordering
11. Throughput Optimization x
11.1. Throughput of Posted Writes 11.2. Throughput of Non-Posted Reads
12. Design Implementation x
12.1. Making Analog QSF Assignments Using the Assignment Editor 12.2. Making Pin Assignments to Assign I/O Standard to Serial Data Pins 12.3. Recommended Reset Sequence to Avoid Link Training Issues 12.4. SDC Timing Constraints
13. Additional Features x
13.1. Configuration over Protocol (CvP) 13.2. Autonomous Mode 13.3. ECRC
13.2. Autonomous Mode x
13.2.1. Enabling Autonomous Mode 13.2.2. Enabling CvP Initialization
13.3. ECRC x
13.3.1. ECRC on the RX Path 13.3.2. ECRC on the TX Path
15. Transceiver PHY IP Reconfiguration x
15.1. Connecting the Transceiver Reconfiguration Controller IP Core 15.2. Transceiver Reconfiguration Controller Connectivity for Designs Using CvP
16. Testbench and Design Example x
16.1. Endpoint Testbench 16.2. Root Port Testbench 16.3. Test Driver Module 16.4. Root Port Design Example 16.5. Root Port BFM Overview 16.6. BFM Procedures and Functions 16.7. Setting Up Simulation
16.1. Endpoint Testbench x
16.1.1. Endpoint Testbench for SR-IOV
16.5. Root Port BFM Overview x
16.5.1. BFM Memory Map 16.5.2. Configuration Space Bus and Device Numbering 16.5.3. Configuration of Root Port and Endpoint 16.5.4. Issuing Read and Write Transactions to the Application Layer
16.6. BFM Procedures and Functions x
16.6.1. ebfm_barwr Procedure 16.6.2. ebfm_barwr_imm Procedure 16.6.3. ebfm_barrd_wait Procedure 16.6.4. ebfm_barrd_nowt Procedure 16.6.5. ebfm_cfgwr_imm_wait Procedure 16.6.6. ebfm_cfgwr_imm_nowt Procedure 16.6.7. ebfm_cfgrd_wait Procedure 16.6.8. ebfm_cfgrd_nowt Procedure 16.6.9. BFM Configuration Procedures 16.6.10. BFM Shared Memory Access Procedures 16.6.11. BFM Log and Message Procedures 16.6.12. Verilog HDL Formatting Functions
16.6.9. BFM Configuration Procedures x
16.6.9.1. ebfm_cfg_rp_ep Procedure 16.6.9.2. ebfm_cfg_decode_bar Procedure
16.6.10. BFM Shared Memory Access Procedures x
16.6.10.1. Shared Memory Constants 16.6.10.2. shmem_write Task 16.6.10.3. shmem_read Function 16.6.10.4. shmem_display Verilog HDL Function 16.6.10.5. shmem_fill Procedure 16.6.10.6. shmem_chk_ok Function
16.6.11. BFM Log and Message Procedures x
16.6.11.1. ebfm_display Verilog HDL Function 16.6.11.2. ebfm_log_stop_sim Verilog HDL Function 16.6.11.3. ebfm_log_set_suppressed_msg_mask Task 16.6.11.4. ebfm_log_set_stop_on_msg_mask Verilog HDL Task 16.6.11.5. ebfm_log_open Verilog HDL Function 16.6.11.6. ebfm_log_close Verilog HDL Function
16.6.12. Verilog HDL Formatting Functions x
16.6.12.1. himage1 16.6.12.2. himage2 16.6.12.3. himage4 16.6.12.4. himage8 16.6.12.5. himage16 16.6.12.6. dimage1 16.6.12.7. dimage2 16.6.12.8. dimage3 16.6.12.9. dimage4 16.6.12.10. dimage5 16.6.12.11. dimage6 16.6.12.12. dimage7
16.7. Setting Up Simulation x
16.7.1. Changing Between Serial and PIPE Simulation 16.7.2. Using the PIPE Interface for Gen1 and Gen2 Variants 16.7.3. Viewing the Important PIPE Interface Signals 16.7.4. Disabling the Scrambler for Gen1 and Gen2 Simulations 16.7.5. Disabling 8B/10B Encoding and Decoding for Gen1 and Gen2 Simulations 16.7.6. Changing between the Hard and Soft Reset Controller
17. Debugging x
17.1. Hardware Bring-Up Issues 17.2. Link Training 17.3. Use Third-Party PCIe Analyzer 17.4. BIOS Enumeration Issues
17.2. Link Training x
17.2.1. Debugging Link that Fails To Reach L0 17.2.2. Link Hangs in L0 State
B. Document Revision History x
B.1. Document Revision History of the Arria® V GZ Avalon® Streaming (Avalon-ST) Interface for PCIe* Solutions User Guide
1. Datasheet
2. Getting Started with the Arria® V GZ Hard IP for PCI Express
3. Getting Started with the Configuration Space Bypass Mode Qsys Example Design
4. Parameter Settings
5. Interfaces and Signal Descriptions
6. Registers
7. Interrupts
8. Error Handling
9. PCI Express Protocol Stack
10. Transaction Layer Protocol (TLP) Details
11. Throughput Optimization
12. Design Implementation
13. Additional Features
14. Hard IP Reconfiguration
15. Transceiver PHY IP Reconfiguration
16. Testbench and Design Example
17. Debugging
A. Lane Initialization and Reversal
B. Document Revision History

5.11. Transaction Layer Configuration Space Signals

Table 35.  Configuration Space Signals These signals are not available if Configuration Space Bypass mode is enabled.

Signal

Direction

Description

tl_cfg_add[3:0]

Output

Address of the register that has been updated. This signal is an index indicating which Configuration Space register information is being driven onto tl_cfg_ctl.The indexing is defined in Multiplexed Configuration Register Information Available on tl_cfg_ctl.

The index increments every 8 coreclkout_hip cycles

tl_cfg_ctl[31:0]

Output

The tl_cfg_ctl signal is multiplexed and contains the contents of the Configuration Space registers. The indexing is defined in Multiplexed Configuration Register Information Available on tl_cfg_ctl.

tl_cfg_sts[52:0]

Output

Configuration status bits. This information updates every coreclkout_hip cycle. The following table provides detailed descriptions of the status bits.

hpg_ctrler[4:0]

Input

The hpg_ctrler signals are only available in Root Port mode and when the Slot capability register is enabled. Refer to the Slot register and Slot capability register parameters in Table 6–9 on page 6–10. For Endpoint variations the hpg_ctrler input should be hardwired to 0s. The bits have the following meanings:

Input

  • [0]: Attention button pressed. This signal should be asserted when the attention button is pressed. If no attention button exists for the slot, this bit should be hardwired to 0, and the Attention Button Present bit (bit[0]) in the Slot capability register parameter is set to 0.

Input

  • [1]: Presence detect. This signal should be asserted when a presence detect circuit detects a presence detect change in the slot.

Input

  • [2]: Manually-operated retention latch (MRL) sensor changed. This signal should be asserted when an MRL sensor indicates that the MRL is Open. If an MRL Sensor does not exist for the slot, this bit should be hardwired to 0, and the MRL Sensor Present bit (bit[2]) in the Slot capability register parameter is set to 0.

Input

  • [3]: Power fault detected. This signal should be asserted when the power controller detects a power fault for this slot. If this slot has no power controller, this bit should be hardwired to 0, and the Power Controller Present bit (bit[1]) in the Slot capability register parameter is set to 0.

Input

  • [4]: Power controller status. This signal is used to set the command completed bit of the Slot Status register. Power controller status is equal to the power controller control signal. If this slot has no power controller, this bit should be hardwired to 0 and the Power Controller Present bit (bit[1]) in the Slot capability register is set to 0.
Table 36.  Mapping Between tl_cfg_sts and Configuration Space Registers

tl_cfg_sts

Configuration Space Register

Description

[52:49]

Device Status Register[3:0]

Records the following errors:

  • Bit 3: unsupported request detected
  • Bit 2: fatal error detected
  • Bit 1: non-fatal error detected
  • Bit 0: correctable error detected

[48]

Slot Status Register[8]

Data Link Layer state changed

[47]

Slot Status Register[4]

Command completed. (The hot plug controller completed a command.)

[46:31]

Link Status Register[15:0]

Records the following link status information:

  • Bit 15: link autonomous bandwidth status
  • Bit 14: link bandwidth management status
  • Bit 13: Data Link Layer link active - This bit is only available for Root Ports. It is always 0 for Endpoints.
  • Bit 12: Slot clock configuration
  • Bit 11: Link Training
  • Bit 10: Undefined
  • Bits[9:4]: Negotiated Link Width
  • Bits[3:0] Link Speed

[30]

Link Status 2 Register[0]

Current de-emphasis level.

[29:25]

Status Register[15:11]

Records the following 5 primary command status errors:

  • Bit 15: detected parity error
  • Bit 14: signaled system error
  • Bit 13: received master abort
  • Bit 12: received target abort
  • Bit 11: signaled target abort

[24]

Secondary Status Register[8]

Master data parity error

[23:6]

Root Status Register[17:0]

Records the following PME status information:

  • Bit 17: PME pending
  • Bit 16: PME status
  • Bits[15:0]: PME request ID[15:0]

[5:1]

Secondary Status Register[15:11]

Records the following 5 secondary command status errors:

  • Bit 15: detected parity error
  • Bit 14: received system error
  • Bit 13: received master abort
  • Bit 12: received target abort
  • Bit 11: signaled target abort

[0]

Secondary Status Register[8]

Master Data Parity Error


Section Content
Configuration Space Register Access Timing
Configuration Space Register Access

Level Two Title