Intel Programmable Acceleration Card (PAC) with Intel Arria 10 GT FPGA Datasheet

Download PDF
ID 683214
Date 11/02/2018
Public
Document Table of Contents
Document Table of Contents x
1. Introduction 2. Overview 3. System Compatibility 4. Mechanical Information 5. Thermal Specifications 6. FPGA Factory Image 7. Board Management Controller A. References B. Document Revision History for Intel® Programmable Acceleration Card (PAC) with Intel® Arria® 10 GT FPGA Datasheet
2. Overview x
2.1. Intel® PAC with Intel® Arria® 10 GT FPGA Block Diagram 2.2. Overview of Product Features
2.2. Overview of Product Features x
2.2.1. Intel® Arria® 10 GT FPGA 2.2.2. Fortville Network Interface Controller 2.2.3. On-Board Memory 2.2.4. Interfaces and Dimensions 2.2.5. Software 2.2.6. Power 2.2.7. Board Management Controller (BMC) 2.2.8. Network Interface 2.2.9. Control and Support
2.2.9. Control and Support x
2.2.9.1. Parkvale Retimer 2.2.9.2. PCIe Overview 2.2.9.3. Board Management Controller Overview
5. Thermal Specifications x
5.1. Thermal Test Performance Results
7. Board Management Controller x
7.1. BMC Features
7.1. BMC Features x
7.1.1. BMC Voltage and Thermal Handling
1. Introduction
2. Overview
3. System Compatibility
4. Mechanical Information
5. Thermal Specifications
6. FPGA Factory Image
7. Board Management Controller
A. References
B. Document Revision History for Intel® Programmable Acceleration Card (PAC) with Intel® Arria® 10 GT FPGA Datasheet

2.2.6. Power

  • 100W thermal design point (TDP)
    • As the developer or solution provider, you must ensure that the AFU does not exceed the TDP limit or the limit specified by the qualified server vendor. Functionality and reliability of the server is not supported for AFUs that exceed the specification.
    • The PAC source power must be provided from both the 12V PCIe slot and the 12V Auxiliary 2×3 power connector. The PAC does not power up if either power source is disconnected.
Level Two Title