Intel® Agilex™ Hard Processor System Remote System Update User Guide

ID 683184
Date 7/13/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

C.7.1. dtb

Command rsu dtb
Description Update Linux DTB MTD partition called qspi_boot to start from the SPT0 start address, and adjust its size accordingly. It assumes the qspi_boot partition starts from zero.
The rsu dtb operates on the DTB loaded in memory by U-Boot, before passing it to Linux*. The sequence to use is:
  1. Load DTB.
  2. Run rsu dtb command.
  3. Boot Linux*
Parameters None
Note: If no partition called qspi_boot is found, the command fails.
Return Value 0 on success, or error code