Accelerator Functional Unit Developer’s Guide for Intel® FPGA Programmable Acceleration Card

Download PDF
ID 683129
Date 7/20/2020
Public
Document Table of Contents
Document Table of Contents x
1. About this Document 2. Introduction 3. Getting Started with Platform Configuration 4. The Accelerator Functional Unit (AFU) 5. Developing AFUs with the OPAE SDK 6. AFU In-System Debug 7. Accelerator Functional Unit Developer's Guide for Intel® FPGA Programmable Acceleration Card Archives 8. Document Revision History for Accelerator Functional Unit Developer's Guide for Intel® FPGA Programmable Acceleration Card
1. About this Document x
1.1. Intended Audience 1.2. Conventions 1.3. Acronym List for Accelerator Functional Unit Developer’s Guide 1.4. Acceleration Glossary 1.5. Related Documentation
2. Introduction x
2.1. Getting Started with AFU Development 2.2. Base Knowledge and Skills Prerequisites
2.1. Getting Started with AFU Development x
2.1.1. Development Environment References 2.1.2. FPGA Tools and IP Requirements
4. The Accelerator Functional Unit (AFU) x
4.1. AFU Design Components 4.2. Basic Building Blocks
5. Developing AFUs with the OPAE SDK x
5.1. Overview of the OPAE SDK 5.2. Overview of the OPAE Platform for AFUs 5.3. OPAE SDK Design Flow for AFU Development
5.2. Overview of the OPAE Platform for AFUs x
5.2.1. Platform Device Classes 5.2.2. The Platform Interface Manager (PIM)
5.2.1. Platform Device Classes x
5.2.1.1. The clocks Device Class 5.2.1.2. The cci-p Device Class 5.2.1.3. The power Device Class 5.2.1.4. The error Device Class 5.2.1.5. The hssi Device Class 5.2.1.6. The local-memory Device Class
5.2.2. The Platform Interface Manager (PIM) x
5.2.2.1. Interface Transforms 5.2.2.2. Pipelining 5.2.2.3. Clock Crossing
5.3. OPAE SDK Design Flow for AFU Development x
5.3.1. Overview of the Design Flow 5.3.2. Design Flow Details
5.3.1. Overview of the Design Flow x
5.3.1.1. Minimal Flow Example 5.3.1.2. General Flow Example
5.3.1.1. Minimal Flow Example x
5.3.1.1.1. Specify the Platform Configuration 5.3.1.1.2. Design the AFU 5.3.1.1.3. Specify the Build Configuration 5.3.1.1.4. Generate the AF Build Environment 5.3.1.1.5. Generate the AF
5.3.1.2. General Flow Example x
5.3.1.2.1. Generate the ASE Build Environment 5.3.1.2.2. Verify the AFU with ASE
5.3.2. Design Flow Details x
5.3.2.1. Specify the Platform Configuration 5.3.2.2. Design the AFU 5.3.2.3. AFU Design Guidelines 5.3.2.4. Partial Reconfiguration Design Guidelines 5.3.2.5. Specify the Build Configuration 5.3.2.6. Generate the ASE Build Environment 5.3.2.7. Verify the AFU with ASE 5.3.2.8. Generate the AF Build Environment 5.3.2.9. Generate the AF
5.3.2.1. Specify the Platform Configuration x
5.3.2.1.1. Specify the AFU's UUID 5.3.2.1.2. Request a Top-level Interface 5.3.2.1.3. Extend a Top-level Interface 5.3.2.1.4. Request Device Interface Pipelining 5.3.2.1.5. Request Device Interface Clock-crossing 5.3.2.1.6. Specify a Requested Device as Optional 5.3.2.1.7. Specify AFU User Clock Timing
5.3.2.2. Design the AFU x
5.3.2.2.1. Start with a Top-level Module Template 5.3.2.2.2. Including the Platform Device Interface Definitions 5.3.2.2.3. Using the AFU UUID Header File 5.3.2.2.4. Clock Abstraction for the cci-p Device Interface 5.3.2.2.5. Generating an AF Build Environment for Source Development
5.3.2.3. AFU Design Guidelines x
5.3.2.3.1. General Guidelines 5.3.2.3.2. Utilizing Clock Resources 5.3.2.3.3. Interfacing with the FPGA Interface Manager (FIM)
6. AFU In-System Debug x
6.1. Remote Signal Tap Setup and Use
6.1. Remote Signal Tap Setup and Use x
6.1.1. Instrumenting the AFU Design for Signal Tap 6.1.2. Enable Remote Debug and Signal Tap 6.1.3. Generate the Remote Debug Enabled AF 6.1.4. Prepare the Remote Debug Host 6.1.5. Running a Remote Debug Session 6.1.6. Remote Debug Guidelines 6.1.7. Troubleshooting Remote Debug Connections
6.1.5. Running a Remote Debug Session x
6.1.5.1. Connect to the AFU Target 6.1.5.2. Using Signal Tap with a Remote Target Connection 6.1.5.3. Stimulating the Target AFU for In-System Debug 6.1.5.4. Disconnect from the AFU Target
6.1.5.3. Stimulating the Target AFU for In-System Debug x
6.1.5.3.1. Accessing the AFU in Shared Mode
1. About this Document
2. Introduction
3. Getting Started with Platform Configuration
4. The Accelerator Functional Unit (AFU)
5. Developing AFUs with the OPAE SDK
6. AFU In-System Debug
7. Accelerator Functional Unit Developer's Guide for Intel® FPGA Programmable Acceleration Card Archives
8. Document Revision History for Accelerator Functional Unit Developer's Guide for Intel® FPGA Programmable Acceleration Card

5.3.2.4. Partial Reconfiguration Design Guidelines

  • You must generate the AF bitstream using the $OPAE_PLATFORM_ROOT/bin/run.sh script.
  • Partial reconfiguration switches the PR region from one AFU to another AFU. Any software application exercising an AFU in the PR region should be terminated before initiating PR with OPAE to switch in a new AFU. This includes the remote debug feature.
  • After PR, the default initial state of the registers and the contents of the MLABs and M20Ks in the PR region are indeterminate. To establish, a known initial condition for synchronous elements in the AFU, follow the guidelines below:
    • Design registers with reset logic sensitive to the FIU’s pck_cp2af_softReset output. Do not rely on RTL initial value assignments or initial blocks.
    • Initialize MLAB and M20K contents using .mif files or RTL encoded values. Please refer to the Intel Quartus Prime Pro Edition Handbook Volume 1 Design and Compilation document for inferring or instantiating memory with initialized contents.
  • The PR region must contain only core resources such as LABs, RAMs and DSPs. PLLs and Clock control blocks cannot be instantiated in the PR region.
  • The placement and routing of a given AFU can vary between OPAE SDK releases and different OPAE hardware platform targets. Use seed sweeps for large resources or routing-intensive designs.
  • If PR compilation results in timing violations in the FIM static region, retry PR compilation with a different fitter seed value.
Related Information
Level Two Title