Visible to Intel only — GUID: nfa1426741803969
Ixiasoft
3.4. Connecting the Intel® FPGA Download Cable to the Board
- Disconnect the power cable from the device board.
- Connect the Intel® FPGA Download Cable to your PC.
- Plug the Intel® FPGA Download Cable into the 10-pin header on the device board.
Figure 5. Connection to the Device Board
- Connect the power cable to the device board.
The Found New Hardware wizard may open and prompt you to install a new hardware driver. Close the wizard and follow the steps provided in subsequent sections to install the hardware driver.
- To disconnect the Intel® FPGA Download Cable from the device board, follow these steps to ensure that the cable is not damaged.
- Remove power from the device board.
- Unplug the Intel® FPGA Download Cable from the board.
- Unplug the Intel® FPGA Download Cable from your PC.