100G Interlaken Design Example User Guide

Download PDF
ID 683071
Date 10/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example Description A. Document Revision History for 100G Interlaken Design Example User Guide
1. Quick Start Guide x
1.1. Directory Structure 1.2. Design Components 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design
2. Design Example Description x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Example Design Behavior 2.5. Interface Signals 2.6. Register Map
1. Quick Start Guide
2. Design Example Description
A. Document Revision History for 100G Interlaken Design Example User Guide

1.5. Compiling and Testing the Design

To compile and run a demonstration test on the hardware example design, follow these steps:
  1. Ensure hardware example design generation is complete.
  2. Open the Intel® Quartus® Prime project <user-specified location>/example_design_a10/quartus/example_design.qpf, where <user-specified location> is the directory location you specified when you generated the testbench and hardware example design.
  3. On the Processing menu, click Start Compilation.
  4. After successful compilation, a .sof file will be generated in your specified directory. Follow these steps to program the hardware example design on the Intel® Arria® 10:
    1. On the Tools menu, click Programmer.
    2. In the Programmer, click Hardware Setup.
    3. Select a programming device.
    4. Select and add the Intel® Arria® 10 GX Transceiver Signal Integrity Development Kit to which your Intel® Quartus® Prime session can connect.
    5. Ensure that Mode is set to JTAG.
    6. Select the Arria 10 device and click Add Device. The Programmer displays a block diagram of the connections between the devices on your board.
    7. In the row with your .sof, check the box for the .sof.
    8. Check the box in the Program/Configure column.
    9. Click Start.
  5. After the hardware example design is configured on the Intel® Arria® 10 device, in the Intel® Quartus® Prime software, on the Tools menu, click System Debugging Tools > System Console.
  6. In the Tcl Console pane, type sysconsole_testbench.tcl.
  7. Type run_example_design.
Level Two Title