Intel® MAX® 10 Clocking and PLL User Guide

Download PDF
ID 683047
Date 12/26/2023
Public
Document Table of Contents
Document Table of Contents x
1. Intel® MAX® 10 Clocking and PLL Overview 2. Intel® MAX® 10 Clocking and PLL Architecture and Features 3. Intel® MAX® 10 Clocking and PLL Design Considerations 4. Intel® MAX® 10 Clocking and PLL Implementation Guides 5. ALTCLKCTRL Intel® FPGA IP References 6. Avalon ALTPLL Intel® FPGA IP References 7. Avalon ALTPLL RECONFIG Intel® FPGA IP References 8. Internal Oscillator Intel® FPGA IP References 9. Intel® MAX® 10 Clocking and PLL User Guide Archives 10. Document Revision History for the Intel® MAX® 10 Clocking and PLL User Guide
1. Intel® MAX® 10 Clocking and PLL Overview x
1.1. Clock Networks Overview 1.2. Internal Oscillator Overview 1.3. PLLs Overview
2. Intel® MAX® 10 Clocking and PLL Architecture and Features x
2.1. Clock Networks Architecture and Features 2.2. Internal Oscillator Architecture and Features 2.3. PLLs Architecture and Features
2.1. Clock Networks Architecture and Features x
2.1.1. Global Clock Networks 2.1.2. Clock Pins Introduction 2.1.3. Clock Resources 2.1.4. Global Clock Network Sources 2.1.5. Global Clock Control Block 2.1.6. Global Clock Network Power Down 2.1.7. Clock Enable Signals
2.3. PLLs Architecture and Features x
2.3.1. PLL Architecture 2.3.2. PLL Features 2.3.3. PLL Locations 2.3.4. Clock Pin to PLL Connections 2.3.5. PLL Counter to GCLK Connections 2.3.6. PLL Control Signals 2.3.7. Clock Feedback Modes 2.3.8. PLL External Clock Output 2.3.9. ADC Clock Input from PLL 2.3.10. Spread-Spectrum Clocking 2.3.11. PLL Programmable Parameters 2.3.12. Clock Switchover 2.3.13. PLL Cascading 2.3.14. PLL Reconfiguration
2.3.7. Clock Feedback Modes x
2.3.7.1. Source Synchronous Mode 2.3.7.2. No Compensation Mode 2.3.7.3. Normal Mode 2.3.7.4. Zero-Delay Buffer Mode
2.3.11. PLL Programmable Parameters x
2.3.11.1. Programmable Duty Cycle 2.3.11.2. Programmable Bandwidth 2.3.11.3. Programmable Phase Shift Fine Resolution Phase Shift Coarse Resolution Phase Shift
2.3.12. Clock Switchover x
2.3.12.1. Automatic Clock Switchover 2.3.12.2. Automatic Switchover with Manual Override 2.3.12.3. Manual Clock Switchover
2.3.13. PLL Cascading x
2.3.13.1. PLL-to-PLL Cascading 2.3.13.2. Counter-to-Counter Cascading
3. Intel® MAX® 10 Clocking and PLL Design Considerations x
3.1. Clock Networks Design Considerations 3.2. Internal Oscillator Design Considerations 3.3. PLLs Design Considerations
3.1. Clock Networks Design Considerations x
3.1.1. Guideline: Clock Enable Signals 3.1.2. Guideline: Connectivity Restrictions
3.2. Internal Oscillator Design Considerations x
3.2.1. Guideline: Connectivity Restrictions
3.3. PLLs Design Considerations x
3.3.1. Guideline: PLL Control Signals 3.3.2. Guideline: Connectivity Restrictions 3.3.3. Guideline: Self-Reset 3.3.4. Guideline: Output Clocks 3.3.5. Guideline: PLL Cascading 3.3.6. Guideline: Clock Switchover 3.3.7. Guideline: .mif Streaming in PLL Reconfiguration 3.3.8. Guideline: scandone Signal for PLL Reconfiguration
4. Intel® MAX® 10 Clocking and PLL Implementation Guides x
4.1. ALTCLKCTRL Intel® FPGA IP 4.2. Avalon ALTPLL Intel® FPGA IP 4.3. Avalon ALTPLL RECONFIG Intel® FPGA IP 4.4. Internal Oscillator Intel® FPGA IP
4.2. Avalon ALTPLL Intel® FPGA IP x
4.2.1. Expanding the PLL Lock Range 4.2.2. Programmable Bandwidth with Advanced Parameters 4.2.3. PLL Dynamic Reconfiguration Implementation 4.2.4. Dynamic Phase Configuration Implementation
4.2.3. PLL Dynamic Reconfiguration Implementation x
4.2.3.1. Post-Scale Counters (C0 to C4) 4.2.3.2. Scan Chain 4.2.3.3. Charge Pump and Loop Filter 4.2.3.4. Bypassing PLL Counter
4.2.4. Dynamic Phase Configuration Implementation x
4.2.4.1. Dynamic Phase Configuration Counter Selection 4.2.4.2. Dynamic Phase Configuration with Advanced Parameters
4.3. Avalon ALTPLL RECONFIG Intel® FPGA IP x
4.3.1. Obtaining the Resource Utilization Report
5. ALTCLKCTRL Intel® FPGA IP References x
5.1. ALTCLKCTRL Intel® FPGA IP Parameters 5.2. ALTCLKCTRL Intel® FPGA IP Ports and Signals
6. Avalon ALTPLL Intel® FPGA IP References x
6.1. Avalon ALTPLL Intel® FPGA IP Parameters 6.2. Avalon ALTPLL Intel® FPGA IP Ports and Signals
6.1. Avalon ALTPLL Intel® FPGA IP Parameters x
6.1.1. Operation Modes Parameter Settings 6.1.2. PLL Control Signals Parameter Settings 6.1.3. Programmable Bandwidth Parameter Settings 6.1.4. Clock Switchover Parameter Settings 6.1.5. PLL Dynamic Reconfiguration Parameter Settings 6.1.6. Dynamic Phase Configuration Parameter Settings 6.1.7. Output Clocks Parameter Settings
7. Avalon ALTPLL RECONFIG Intel® FPGA IP References x
7.1. Avalon ALTPLL RECONFIG Intel® FPGA IP Parameters 7.2. Avalon ALTPLL RECONFIG Intel® FPGA IP Ports and Signals 7.3. Avalon ALTPLL RECONFIG Intel® FPGA IP Counter Settings
8. Internal Oscillator Intel® FPGA IP References x
8.1. Internal Oscillator Intel® FPGA IP Parameters 8.2. Internal Oscillator Intel® FPGA IP Ports and Signals
1. Intel® MAX® 10 Clocking and PLL Overview
2. Intel® MAX® 10 Clocking and PLL Architecture and Features
3. Intel® MAX® 10 Clocking and PLL Design Considerations
4. Intel® MAX® 10 Clocking and PLL Implementation Guides
5. ALTCLKCTRL Intel® FPGA IP References
6. Avalon ALTPLL Intel® FPGA IP References
7. Avalon ALTPLL RECONFIG Intel® FPGA IP References
8. Internal Oscillator Intel® FPGA IP References
9. Intel® MAX® 10 Clocking and PLL User Guide Archives
10. Document Revision History for the Intel® MAX® 10 Clocking and PLL User Guide

2.3.11.3. Programmable Phase Shift

The Intel® MAX® 10 devices use phase shift to implement clock delays. You can phase shift the output clocks from the Intel® MAX® 10 PLLs using one of the following methods:

  • Fine resolution using VCO phase taps
  • Coarse resolution using counter starting time

The VCO phase output and counter starting time are the most accurate methods of inserting delays. These methods are purely based on counter settings, which are independent of process, voltage, and temperature.

The Intel® MAX® 10 devices support dynamic phase shifting of VCO phase taps only. The phase shift is configurable for any number of times. Each phase shift takes about one scanclk cycle, allowing you to implement large phase shifts quickly.

Fine Resolution Phase Shift

Fine resolution phase shifts are implemented by allowing any of the output counters (C[4..0]) or the M counter to use any of the eight phases of the VCO as the reference clock. This allows you to adjust the delay time with a fine resolution. The following equation shows the minimum delay time that you can insert using this method.

Figure 17. Fine Resolution Phase Shift EquationfREF in this equation is the input reference clock frequency

For example, if fREF is 100 MHz, N = 1, and M = 8, then fVCO = 800 MHz, and Φfine = 156.25 ps. The PLL operating frequency defines this phase shift, a value that depends on the reference clock frequency and counter settings.

The following figure shows an example of phase shift insertion using the fine resolution through VCO phase taps method. The eight phases from the VCO are shown and labeled for reference.

Figure 18. Example of Delay Insertion Using VCO Phase Output and Counter Delay TimeThe observations in this example are as follows:
  • CLK0 is based on 0° phase from the VCO and has the C value for the counter set to one.
  • CLK1 signal is divided by four, two VCO clocks for high time and two VCO clocks for low time. CLK1 is based on the 135° phase tap from the VCO and has the C value for the counter set to one.
  • CLK2 signal is also divided by four. In this case, the two clocks are offset by 3 Φfine. CLK2 is based on the 0° phase from the VCO but has the C value for the counter set to three. This creates a delay of two Φcoarse (two complete VCO periods).

Coarse Resolution Phase Shift

Coarse resolution phase shifts are implemented by delaying the start of the counters for a predetermined number of counter clocks.

Figure 19. Coarse Resolution Phase Shift Equation C in this equation is the count value set for the counter delay time—the initial setting in the PLL usage section of the compilation report in the Intel® Quartus® Prime software. If the initial value is 1, C – 1 = 0° phase shift.
Related Information
Level Two Title