Intel® MAX® 10 Clocking and PLL User Guide

Download PDF
ID 683047
Date 12/26/2023
Public
Document Table of Contents
Document Table of Contents x
1. Intel® MAX® 10 Clocking and PLL Overview 2. Intel® MAX® 10 Clocking and PLL Architecture and Features 3. Intel® MAX® 10 Clocking and PLL Design Considerations 4. Intel® MAX® 10 Clocking and PLL Implementation Guides 5. ALTCLKCTRL Intel® FPGA IP References 6. Avalon ALTPLL Intel® FPGA IP References 7. Avalon ALTPLL RECONFIG Intel® FPGA IP References 8. Internal Oscillator Intel® FPGA IP References 9. Intel® MAX® 10 Clocking and PLL User Guide Archives 10. Document Revision History for the Intel® MAX® 10 Clocking and PLL User Guide
1. Intel® MAX® 10 Clocking and PLL Overview x
1.1. Clock Networks Overview 1.2. Internal Oscillator Overview 1.3. PLLs Overview
2. Intel® MAX® 10 Clocking and PLL Architecture and Features x
2.1. Clock Networks Architecture and Features 2.2. Internal Oscillator Architecture and Features 2.3. PLLs Architecture and Features
2.1. Clock Networks Architecture and Features x
2.1.1. Global Clock Networks 2.1.2. Clock Pins Introduction 2.1.3. Clock Resources 2.1.4. Global Clock Network Sources 2.1.5. Global Clock Control Block 2.1.6. Global Clock Network Power Down 2.1.7. Clock Enable Signals
2.3. PLLs Architecture and Features x
2.3.1. PLL Architecture 2.3.2. PLL Features 2.3.3. PLL Locations 2.3.4. Clock Pin to PLL Connections 2.3.5. PLL Counter to GCLK Connections 2.3.6. PLL Control Signals 2.3.7. Clock Feedback Modes 2.3.8. PLL External Clock Output 2.3.9. ADC Clock Input from PLL 2.3.10. Spread-Spectrum Clocking 2.3.11. PLL Programmable Parameters 2.3.12. Clock Switchover 2.3.13. PLL Cascading 2.3.14. PLL Reconfiguration
2.3.7. Clock Feedback Modes x
2.3.7.1. Source Synchronous Mode 2.3.7.2. No Compensation Mode 2.3.7.3. Normal Mode 2.3.7.4. Zero-Delay Buffer Mode
2.3.11. PLL Programmable Parameters x
2.3.11.1. Programmable Duty Cycle 2.3.11.2. Programmable Bandwidth 2.3.11.3. Programmable Phase Shift
2.3.12. Clock Switchover x
2.3.12.1. Automatic Clock Switchover 2.3.12.2. Automatic Switchover with Manual Override 2.3.12.3. Manual Clock Switchover
2.3.13. PLL Cascading x
2.3.13.1. PLL-to-PLL Cascading 2.3.13.2. Counter-to-Counter Cascading
3. Intel® MAX® 10 Clocking and PLL Design Considerations x
3.1. Clock Networks Design Considerations 3.2. Internal Oscillator Design Considerations 3.3. PLLs Design Considerations
3.1. Clock Networks Design Considerations x
3.1.1. Guideline: Clock Enable Signals 3.1.2. Guideline: Connectivity Restrictions
3.2. Internal Oscillator Design Considerations x
3.2.1. Guideline: Connectivity Restrictions
3.3. PLLs Design Considerations x
3.3.1. Guideline: PLL Control Signals 3.3.2. Guideline: Connectivity Restrictions 3.3.3. Guideline: Self-Reset 3.3.4. Guideline: Output Clocks 3.3.5. Guideline: PLL Cascading 3.3.6. Guideline: Clock Switchover 3.3.7. Guideline: .mif Streaming in PLL Reconfiguration 3.3.8. Guideline: scandone Signal for PLL Reconfiguration
4. Intel® MAX® 10 Clocking and PLL Implementation Guides x
4.1. ALTCLKCTRL Intel® FPGA IP 4.2. Avalon ALTPLL Intel® FPGA IP 4.3. Avalon ALTPLL RECONFIG Intel® FPGA IP 4.4. Internal Oscillator Intel® FPGA IP
4.2. Avalon ALTPLL Intel® FPGA IP x
4.2.1. Expanding the PLL Lock Range 4.2.2. Programmable Bandwidth with Advanced Parameters 4.2.3. PLL Dynamic Reconfiguration Implementation 4.2.4. Dynamic Phase Configuration Implementation
4.2.3. PLL Dynamic Reconfiguration Implementation x
4.2.3.1. Post-Scale Counters (C0 to C4) 4.2.3.2. Scan Chain 4.2.3.3. Charge Pump and Loop Filter 4.2.3.4. Bypassing PLL Counter
4.2.4. Dynamic Phase Configuration Implementation x
4.2.4.1. Dynamic Phase Configuration Counter Selection 4.2.4.2. Dynamic Phase Configuration with Advanced Parameters
4.3. Avalon ALTPLL RECONFIG Intel® FPGA IP x
4.3.1. Obtaining the Resource Utilization Report
5. ALTCLKCTRL Intel® FPGA IP References x
5.1. ALTCLKCTRL Intel® FPGA IP Parameters 5.2. ALTCLKCTRL Intel® FPGA IP Ports and Signals
6. Avalon ALTPLL Intel® FPGA IP References x
6.1. Avalon ALTPLL Intel® FPGA IP Parameters 6.2. Avalon ALTPLL Intel® FPGA IP Ports and Signals
6.1. Avalon ALTPLL Intel® FPGA IP Parameters x
6.1.1. Operation Modes Parameter Settings 6.1.2. PLL Control Signals Parameter Settings 6.1.3. Programmable Bandwidth Parameter Settings 6.1.4. Clock Switchover Parameter Settings 6.1.5. PLL Dynamic Reconfiguration Parameter Settings 6.1.6. Dynamic Phase Configuration Parameter Settings 6.1.7. Output Clocks Parameter Settings
7. Avalon ALTPLL RECONFIG Intel® FPGA IP References x
7.1. Avalon ALTPLL RECONFIG Intel® FPGA IP Parameters 7.2. Avalon ALTPLL RECONFIG Intel® FPGA IP Ports and Signals 7.3. Avalon ALTPLL RECONFIG Intel® FPGA IP Counter Settings
8. Internal Oscillator Intel® FPGA IP References x
8.1. Internal Oscillator Intel® FPGA IP Parameters 8.2. Internal Oscillator Intel® FPGA IP Ports and Signals
1. Intel® MAX® 10 Clocking and PLL Overview
2. Intel® MAX® 10 Clocking and PLL Architecture and Features
3. Intel® MAX® 10 Clocking and PLL Design Considerations
4. Intel® MAX® 10 Clocking and PLL Implementation Guides
5. ALTCLKCTRL Intel® FPGA IP References
6. Avalon ALTPLL Intel® FPGA IP References
7. Avalon ALTPLL RECONFIG Intel® FPGA IP References
8. Internal Oscillator Intel® FPGA IP References
9. Intel® MAX® 10 Clocking and PLL User Guide Archives
10. Document Revision History for the Intel® MAX® 10 Clocking and PLL User Guide

4.2.3.1. Post-Scale Counters (C0 to C4)

You can configure the multiply or divide values and duty cycle of the post-scale counters in real time. Each counter has an 8-bit high time setting and an 8-bit low time setting. The duty cycle is the ratio of output high or low time to the total cycle time, which is the sum of the two.

The post-scale counters have two control bits:

  • rbypass—For bypassing the counter
  • rselodd—For selecting the output clock duty cycle

When the rbypass bit is set to 1, it bypasses the counter, resulting in a division by one. When this bit is set to 0, the PLL computes the effective division of the VCO output frequency based on the high and low time counters. The PLL implements this duty cycle by transitioning the output clock from high-to-low on the rising edge of the VCO output clock.

For example, if the post-scale divide factor is 10, the high and low count values are set to 5 and 5 respectively, to achieve a 50–50% duty cycle. However, a 4 and 6 setting for the high and low count values, respectively, would produce an output clock with 40–60% duty cycle.

The rselodd bit indicates an odd divide factor for the VCO output frequency with a 50% duty cycle. The PLL implements this duty cycle by transitioning the output clock from high-to-low on a falling edge of the VCO output clock.

For example, if the post-scale divide factor is 3, the high and low time count values are 2 and 1 respectively, to achieve this division. This implies a 67%–33% duty cycle. If you need a 50%–50% duty cycle, you must set the rselodd control bit to 1 to achieve this duty cycle despite an odd division factor. When you set rselodd = 1, subtract 0.5 cycles from the high time and add 0.5 cycles to the low time.

The calculation for the example is shown as follows:

  • High time count = 2 cycles
  • Low time count = 1 cycle
  • rselodd = 1 effectively equals:
    • High time count = 1.5 cycles
    • Low time count = 1.5 cycles
    • Duty cycle = (1.5/3)% high time count and (1.5/3)% low time count
Related Information
Level Two Title