Hydra Environment Variables
I_MPI_HYDRA_HOST_FILE
Set the host file to run the application.
Syntax
I_MPI_HYDRA_HOST_FILE=<arg>
Argument
| <arg> | String parameter |
| <hostsfile> | The full or relative path to the host file |
Description
Set this environment variable to specify the hosts file.
I_MPI_HYDRA_HOSTS_GROUP
Set node ranges using brackets, commas, and dashes.
Syntax
I_MPI_HYDRA_HOSTS_GROUP=<arg>
Argument
| <arg> | Set a node range. |
Description
Set this variable to be able to set node ranges using brackets, commas, and dashes (like in Slurm* Workload Manager). For example:
I_MPI_HYDRA_HOSTS_GROUP=”hostA[01-05],hostB,hostC[01-05,07,09-11]”
You can set node ranges with the -hosts-group option.
I_MPI_HYDRA_DEBUG
Print out the debug information.
Syntax
I_MPI_HYDRA_DEBUG=<arg>
Argument
| <arg> | Binary indicator |
| enable | yes | on | 1 | Turn on the debug output |
| disable | no | off | 0 | Turn off the debug output. This is the default value |
Description
Set this environment variable to enable the debug mode.
I_MPI_HYDRA_ENV
Control the environment propagation.
Syntax
I_MPI_HYDRA_ENV=<arg>
Argument
| <arg> | String parameter |
| all | Pass all environment to all MPI processes |
Description
Set this environment variable to control the environment propagation to the MPI processes. By default, the entire launching node environment is passed to the MPI processes. Setting this variable also overwrites environment variables set by the remote shell.
I_MPI_JOB_TIMEOUT
Set the timeout period for mpiexec.hydra.
Syntax
I_MPI_JOB_TIMEOUT=<timeout>
I_MPI_MPIEXEC_TIMEOUT=<timeout>
Argument
| <timeout> | Define mpiexec.hydra timeout period in seconds |
| <n> ≥ 0 | The value of the timeout period. The default timeout value is zero, which means no timeout. |
Description
Set this environment variable to make mpiexec.hydra terminate the job in <timeout> seconds after its launch. The <timeout> value should be greater than zero. Otherwise the environment variable setting is ignored.
I_MPI_JOB_STARTUP_TIMEOUT
Set the mpiexec.hydra job startup timeout.
Syntax
I_MPI_JOB_STARTUP_TIMEOUT=<timeout>
Argument
| <timeout> | Define mpiexec.hydra startup timeout period in seconds |
| <n> ≥ 0 | The value of the timeout period. The default timeout value is zero, which means no timeout. |
Description
Set this environment variable to make mpiexec.hydra terminate the job in <timeout> seconds if some processes are not launched. The <timeout> value should be greater than zero.
I_MPI_JOB_TIMEOUT_SIGNAL
Define the signal to be sent when a job is terminated because of a timeout.
Syntax
I_MPI_JOB_TIMEOUT_SIGNAL=<number>Argument
| <number> | Define the signal number |
| <n>> 0 | The signal number. The default value is 9(SIGKILL) |
Description
Define a signal number to be sent to stop the MPI job if the timeout period specified by the I_MPI_JOB_TIMEOUT environment variable expires. If you set a signal number unsupported by the system, the mpiexec.hydra command prints a warning message and continues the task termination using the default signal number 9 (SIGKILL).
I_MPI_JOB_ABORT_SIGNAL
Define a signal to be sent to all processes when a job is terminated unexpectedly.
Syntax
I_MPI_JOB_ABORT_SIGNAL=<number>
Argument
| <number> | Define signal number |
| <n>> 0 | The default value is 9(SIGKILL) |
Description
Set this environment variable to define a signal for task termination. If you set an unsupported signal number, mpiexec.hydra prints a warning message and uses the default signal 9 (SIGKILL).
I_MPI_JOB_SIGNAL_PROPAGATION
Control signal propagation.
Syntax
I_MPI_JOB_SIGNAL_PROPAGATION=<arg>
Argument
| <arg> | Binary indicator |
| enable | yes | on | 1 | Turn on propagation |
| disable | no | off | 0 | Turn off propagation. This is the default value |
Description
Set this environment variable to control propagation of the signals (SIGINT, SIGALRM, and SIGTERM). If you enable signal propagation, the received signal is sent to all processes of the MPI job. If you disable signal propagation, all processes of the MPI job are stopped with the default signal 9 (SIGKILL).
I_MPI_HYDRA_BOOTSTRAP
Set the bootstrap server.
Syntax
I_MPI_HYDRA_BOOTSTRAP=<arg>
Argument
| <arg> | String parameter |
| ssh | Use secure shell. This is the default value |
| rsh | Use remote shell |
| pdsh | Use parallel distributed shell |
| pbsdsh | Use Torque* and PBS* pbsdsh command |
| fork | Use fork call |
| slurm | Use Slurm* srun command |
| ll | Use LoadLeveler* llspawn.stdio command |
| lsf | Use LSF* blaunch command |
| sge | Use Univa* Grid Engine* qrsh command |
Description
Set this environment variable to specify the bootstrap server.
I_MPI_HYDRA_BOOTSTRAP_EXEC
Set the executable file to be used as a bootstrap server.
Syntax
I_MPI_HYDRA_BOOTSTRAP_EXEC=<arg>
Argument
| <arg> | String parameter |
| <executable> | The name of the executable file |
Description
Set this environment variable to specify the executable file to be used as a bootstrap server.
I_MPI_HYDRA_BOOTSTRAP_EXEC_EXTRA_ARGS
Set additional arguments for the bootstrap server.
Syntax
I_MPI_HYDRA_BOOTSTRAP_EXEC_EXTRA_ARGS=<arg>
Argument
| <arg> | String parameter |
| <args> | Additional bootstrap server arguments |
Description
Set this environment variable to specify additional arguments for the bootstrap server.
NOTE:
If the launcher (blaunch, lsf, pdsh, pbsdsh) falls back to ssh, pass the arguments with the invocation of ssh.
I_MPI_HYDRA_BOOTSTRAP_AUTOFORK
Control the usage of fork call for local processes.
I_MPI_HYDRA_BOOTSTRAP_AUTOFORK = <arg>
Argument
| <arg> | String parameter |
| enable | yes | on | 1 | Use fork for the local processes. This is default value for ssh, rsh, ll, lsf, and pbsdsh bootstrap servers |
| disable | no | off | 0 | Do not use fork for the local processes. This is default value for the sge bootstrap server |
Description
Set this environment variable to control usage of fork call for the local processes.
NOTE:
This option is not applicable to slurm and pdsh bootstrap servers.
I_MPI_HYDRA_RMK
Use the specified value as the resource management kernel to obtain data about available nodes, externally set process counts.
Syntax
I_MPI_HYDRA_RMK=<arg>
Argument
| <arg> | String parameter |
| <rmk> | Resource management kernel. The supported values are slurm, ll, lsf, sge, pbs, cobalt. |
Description
Set this environment variable to use the resource management kernel.
I_MPI_HYDRA_PMI_CONNECT
Define the processing method for PMI messages.
Syntax
I_MPI_HYDRA_PMI_CONNECT=<value>
Argument
| <value> | The algorithm to be used |
| nocache | Do not cache PMI messages |
| cache | Cache PMI messages on the local pmi_proxy management processes to minimize the number of PMI requests. Cached information is automatically propagated to child management processes. |
| lazy-cache | cache mode with on-demand propagation. |
| alltoall | Information is automatically exchanged between all pmi_proxy before any get request can be done. This is the default value. |
Description
Use this environment variable to select the PMI messages processing method.
I_MPI_PERHOST
Define the default behavior for the -perhost option of the mpiexec.hydra command.
Syntax
I_MPI_PERHOST=<value>
Argument
| <value> | Define a value used for -perhost by default |
| integer > 0 | Exact value for the option |
| all | All logical CPUs on the node |
| allcores | All cores (physical CPUs) on the node. This is the default value. |
Description
Set this environment variable to define the default behavior for the -perhost option. Unless specified explicitly, the -perhost option is implied with the value set in I_MPI_PERHOST.
NOTE:
When running under a job scheduler, this environment variable is ignored by default. To control process placement with I_MPI_PERHOST, disable the I_MPI_JOB_RESPECT_PROCESS_PLACEMENT variable.
I_MPI_JOB_TRACE_LIBS
Choose the libraries to preload through the -trace option.
Syntax
I_MPI_JOB_TRACE_LIBS=<arg>
Argument
| <arg> | String parameter |
| <list> | Blank separated list of the libraries to preload. The default value is vt |
Description
Set this environment variable to choose an alternative library for preloading through the -trace option.
I_MPI_JOB_CHECK_LIBS
Choose the libraries to preload through the -check_mpi option.
Syntax
I_MPI_JOB_CHECK_LIBS=<arg>
Argument
| <arg> | String parameter |
| <list> | Blank separated list of the libraries to preload. The default value is vtmc |
Description
Set this environment variable to choose an alternative library for preloading through the -check_mpi option.
I_MPI_HYDRA_BRANCH_COUNT
Set the hierarchical branch count.
Syntax
I_MPI_HYDRA_BRANCH_COUNT =<num>
Argument
| <num> | Number |
| <n> >= 0 | The default value is 16. This value means that hierarchical structure is enabled if the number of nodes is more than 16. If I_MPI_HYDRA_BRANCH_COUNT=0, then there is no hierarchical structure. If I_MPI_HYDRA_BRANCH_COUNT=-1, then branch count is equal to default value. |
Description
Set this environment variable to restrict the number of child management processes launched by the mpiexec.hydra operation or by each pmi_proxy management process.
I_MPI_HYDRA_PMI_AGGREGATE
Turn on/off aggregation of the PMI messages.
Syntax
I_MPI_HYDRA_PMI_AGGREGATE=<arg>
Argument
| <arg> | Binary indicator |
| enable | yes | on | 1 | Enable PMI message aggregation. This is the default value. |
| disable | no | off | 0 | Disable PMI message aggregation. |
Description
Set this environment variable to enable/disable aggregation of PMI messages.
I_MPI_HYDRA_GDB_REMOTE_SHELL
Set the remote shell command to run the GDB debugger. This command uses the Intel® Distribution for GDB.
Syntax
I_MPI_HYDRA_GDB_REMOTE_SHELL=<arg>
Argument
| <arg> | String parameter |
| ssh | Secure Shell (SSH). This is the default value |
| rsh | Remote shell (RSH) |
Description
Set this environment variable to specify the remote shell command to run the GNU* debugger on the remote machines. You can use this environment variable to specify any shell command that has the same syntax as SSH or RSH.
I_MPI_HYDRA_IFACE
Set the network interface.
Syntax
I_MPI_HYDRA_IFACE=<arg>
Argument
| <arg> | String parameter |
| <network interface> | The network interface configured in your system |
Description
Set this environment variable to specify the network interface to use. For example, use "-iface ib0", if the IP emulation of your InfiniBand* network is configured on ib0.
I_MPI_HYDRA_DEMUX
Set the demultiplexer (demux) mode.
Syntax
I_MPI_HYDRA_DEMUX=<arg>
Argument
| <arg> | String parameter |
| poll | Set poll as the multiple I/O demultiplexer (demux) mode engine. This is the default value. |
| select | Set select as the multiple I/O demultiplexer (demux) mode engine |
Description
Set this environment variable to specify the multiple I/O demux mode engine. The default value is poll.
I_MPI_TMPDIR
Specify a temporary directory.
Syntax
I_MPI_TMPDIR=<arg>
Argument
| <arg> | String parameter |
| <path> | Temporary directory. The default value is /tmp |
Description
Set this environment variable to specify a directory for temporary files.
I_MPI_JOB_RESPECT_PROCESS_PLACEMENT
Specify whether to use the process-per-node placement provided by the job scheduler, or set explicitly.
Syntax
I_MPI_JOB_RESPECT_PROCESS_PLACEMENT=<arg>
Argument
| <value> | Binary indicator |
| enable | yes | on | 1 | Use the process placement provided by job scheduler. This is the default value |
| disable | no | off | 0 | Do not use the process placement provided by job scheduler |
Description
If the variable is set, the Hydra process manager uses the process placement provided by job scheduler (default). In this case the -ppn option and its equivalents are ignored. If you disable the variable, the Hydra process manager uses the process placement set with -ppn or its equivalents.
I_MPI_GTOOL
Specify the tools to be launched for selected ranks. An alternative to this variable is the -gtool option.
Syntax
I_MPI_GTOOL=“<command line for a tool 1>:<ranks set 1>[=exclusive][@arch 1]; <command line for a tool 2>:<ranks set 2>[=exclusive][@arch 2]; … ;<command line for a tool n>:<ranks set n>[=exclusive][@arch n]”
Argument
| <arg> | Parameters |
| <command-line-for-a-tool> | Specify a tool's launch command, including parameters. |
| <rank set> | Specify the range of ranks that are involved in the tool execution. Separate ranks with a comma or use the '-' symbol for a set of contiguous ranks. To run the tool for all ranks, use the all argument.
NOTE:
If you specify incorrect rank index, the corresponding warning is printed and the tool continues working for valid ranks.
|
| [=exclusive] | Specify this parameter to prevent launching a tool for more than one rank per host. This parameter is optional. |
| [@arch] | Specify the architecture on which the tool runs (optional). For a given <rank set>, if you specify this argument, the tool is launched only for the processes residing on hosts with the specified architecture. This parameter is optional. |
Description
Use this option to launch the tools such as Intel® VTune™ Amplifier XE, Valgrind*, and GNU* Debugger for the specified processes.
Examples
The following command line examples demonstrate different scenarios of using the I_MPI_GTOOL environment variable.
Launch Intel® VTune™ Amplifier XE and Valgrind* by setting the I_MPI_GTOOL environment variable:
$ export I_MPI_GTOOL="vtune -collect hotspots -analyze-system -r result1:5,3,7-9=exclusive@bdw;\ valgrind -log-file=log_%p:0,1,10-12@hsw" $ mpiexec.hydra -n 16 a.out
This command launches vtune for the processes that are run on the Intel® microarchitecture codenamed Broadwell. Only one copy of vtune is launched for each host, the process with the minimal index is affected. At the same time, Valgrind* is launched for all specified processes that are run on the Intel® microarchitecture codenamed Haswell. Valgrind's results are saved to the files log_<process ID>.
Launch GDB by setting the I_MPI_GTOOL environment variable (for Intel® oneAPI, this launches the Intel® Distribution for GDB):
$ mpiexec.hydra -n 16 -genv I_MPI_GTOOL="gdb:3,5,7-9" a.out
Use this command to apply GDB to the given rank set.
NOTE:
The options and the environment variable -gtool, -gtoolfile and I_MPI_GTOOL are mutually exclusive. The options -gtool and -gtoolfile are of the same priority and have higher priority than I_MPI_GTOOL. The first specified option in a command line is effective and the second one is ignored. Therefore, use I_MPI_GTOOL if you do not specify -gtool or -gtoolfile.
I_MPI_HYDRA_TOPOLIB
Set the interface for topology detection.
Syntax
I_MPI_HYDRA_TOPOLIB=<arg>
Argument
| <arg> | String parameter |
| hwloc | The hwloc* library functions are invoked for topology detection. |
Description
Set this environment variable to define the interface for platform detection. The hwloc* interface is used by default, but you may explicitly set the variable to use the native Intel MPI Library interface: I_MPI_HYDRA_TOPOLIB=ipl.
I_MPI_PORT_RANGE
Specify a range of allowed port numbers.
Syntax
I_MPI_PORT_RANGE=<range>
Argument
| <range> | String parameter |
| <min>:<max> | Allowed port range |
Description
Set this environment variable to specify a range of the allowed port numbers for the Intel® MPI Library.
I_MPI_SILENT_ABORT
Control abort warning messages.
Syntax
I_MPI_SILENT_ABORT=<arg>
Argument
| <arg> | Binary indicator |
| enable | yes | on | 1 | Do not print abort warning message |
| disable | no | off | 0 | Print abort warning message. This is the default value |
Description
Set this variable to disable printing of abort warning messages. The messages are printed in case of the MPI_Abort call.
You can also disable printing of these messages with the -silent-abort option.
I_MPI_HYDRA_NAMESERVER
Specify the nameserver.
Syntax
I_MPI_HYDRA_NAMESERVER=<arg>
Argument
| <arg> | String parameter |
| <hostname>:<port> | Set the hostname and the port. |
Description
Set this variable to specify the nameserver for your MPI application in the following format:
I_MPI_HYDRA_NAMESERVER = hostname:port
You can set the nameserver with the -nameserver option.
Parent topic: Environment Variable Reference