Resolved Issues with the Intel® Virtual RAID on CPU (Intel® VROC) 8.0 Release for Windows*
The following information lists the resolved issues with the Intel® VROC 8.0 release for Windows*. To learn about the latest updates of Intel® VROC for Windows*, refer to the Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows*.
| Issue ID | Description |
| 1508749788 | A second RAID volume may not rebuild to the hot-spare drive after resetting one member disk to non-RAID. |
| 1808018122 | Trying to clear a SMART event from a drive after a RAID volume is rebuilt (to another drive), may show up as an unknown disk. |
| 1808094827 | The Intel® VROC (VMD NVMe* RAID) Pre-OS environment may only show 32 NVMe* drives in the Intel® VROC HII. |
| 14014436257 | Exceptional boot delay with WD Gold HDD used as SATA data drive attached to RAID mode port, but not in a RAID volume. |
| 18010956435 | The output may not appear in the Intel® VROC Command-Line Interface (CLI) utility after attempting to create a RAID 1 volume from two parts of a x8 drive. |
| 18010986194 | The Intel® VROC Pre-OS may not properly show a boot RAID volume as bootable after the RAID volume encounters a fail condition. |
| 18011148984 | The Intel® VROC Graphical User Interface (GUI) utility may not indicate which drives are connected to the Platform Controller Hub (PCH) for pass-through system drives and system RAID volumes. |
| 18012896024 | The Intel® VROC Graphical User Interface (GUI) utility may not report the proper number of media errors encountered during initialization of RAID 5 volumes. |
| 18012964787 | Number of media errors reported in the Intel® VROC Graphical User Interface (GUI) utility may be different than expected after performing a Verify and Fix process on a RAID 1 volume. |
| 18015582447 | When attempting to rebuild a degraded RAID 10 matrix (second RAID volume is a RAID 5 volume) with two drive failures (RAID 10 - Degraded; RAID 5 - Fail), the Intel® VROC driver may become unresponsive. |
| 18015729524 | Intel® VROC Out-of-Band (OOB) Management may report a wrong error message during the attempt to create a RAID volume from third party vendor drives when using the Intel SSD Only hardware key. |
| 18016453364 | When using the Intel® VROC HII to create a RAID volume, the warning message that all data on the member disks will be lost, may not be displayed. |
| 18016591025 | I/O may become unresponsive with Intel® VROC (VMD NVMe* RAID) for Windows* under heavy I/O while using matrix RAID. |
| 18023331378 | Intel® VROC Bad Block Management (BBM) logging may report the wrong drive serial number when logging BBM events. |
| Looking for more information about the Intel® VROC 8.0 release? |
| Check out the following resources: |
| Related topics |
| Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows* |
| Release Notes for Intel® Virtual RAID on CPU (Intel® VROC) |
| Resources for Intel® Virtual RAID on CPU (Intel® VROC) |