Known Issues with the Intel® Virtual RAID on CPU (Intel® VROC) 8.0 Release for Windows*
The following information lists the known issues with the Intel® VROC 8.0 release for Windows*. To learn about the latest updates of Intel® VROC for Windows*, refer to the Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows*.
| Issue ID | Description |
| 1805900436 | The Intel® VROC F6 drivers may not properly load, and a refresh may be required. |
| 14015389340 | When using AtaPassThru protocol to get information on attached devices from the Intel® VROC Pre-OS, the value of GetNextTargetLun may not be successful. |
| 15010088464 | When the SATA controller is switched to RAID mode, SATA drive information will be displayed in the Intel® VROC SATA HII instead. So, users can reference the device information in the Intel® VROC SATA HII. |
| 15011986293 | When booting the platform with a degraded Intel® VROC RAID 1 data volume, the Intel® VROC 8.0 Graphical User Interface (GUI) utility may not properly display the RAID volume. |
| 15012192390 | An Intel® VROC SATA HDD may have a problem unlocking after sending the 0xf2 command. |
| 18012869559 | The Intel® VROC Graphical User Interface (GUI) and Command-Line Interface (CLI) utilities may not forbid performing operations that use self-encrypting drives in locked state. Creating RAID volumes with locked members may result in a failed volume state. |
| 18015334984 | The warning message: Warning: The AHCI driver will be updated to the latest Microsoft AHCI driver in the system, does not occur when installing Intel® VROC in AHCI mode using the installer. |
| 18016767645 | Within the Intel® VROC SED Manager, a physical drive may appear in twice. |
| 18020541368 | While within the Intel® VROC SED Manager, unencrypted drives that are unplugged and then are selected to have a security key to be setup may experience a platform hang. |
| 18020894568 | Migrating the operating system from a RAID 0 volume to a RAID 5 volume may result in an unexpected error messages in both, Intel® VROC Command-Line Interface (CLI) and Graphical User Interface (GUI) utilities. |
| 18021555907 | The button to increase the volume size (Increase Size) within the Intel® VROC Graphical User Interface (GUI) utility may experience issues refreshing incorrectly. |
| 18022812016 | When the operating system performs a TRIM command onto an Intel® VROC RAID 1 or RAID 10 volume comprised of drives that perform TRIM activities in different ways may encounter a data inconsistency on those areas that had been TRIMed. |
| 18024185962 | A RAID volume may become degraded after the initialization process completes, if two of the drives encounter a bad block condition in the same sector. |
| Looking for more information about the Intel® VROC 8.0 release? |
| Check out the following resources: |
| Related topics |
| Intel® Virtual RAID on CPU (Intel® VROC) Release Notes for Windows* |
| Release Notes for Intel® Virtual RAID on CPU (Intel® VROC) |
| Resources for Intel® Virtual RAID on CPU (Intel® VROC) |