ID:209008 Configuration failed
CAUSE: You directed the Programmer to configure a device with the MasterBlaster communications cable, but the Programmer did not successfully load the data into the device. This problem can be caused by:
- Communications cables not securely connected
- Incorrect device selected
- No power to target system
ACTION: Make sure all cables are securely connected, select a different device, or check the power on the target system.
CAUSE: You directed the Programmer to configure a device with the ByteBlasterMV, ByteBlaster II, USB-Blaster or MasterBlaster communications cable, and you directed the device to use a user-supplied clock on the CLKUSR pin for initialization, but you did not supply a start-up clock for initialization of the CLKUSR pin. As a result, the data did not load successfully into the device.
ACTION: Make sure you have specified a start-up clock for initialization of the CLKUSR pin, or specify that the device not use a user-supplied clock on the CLKUSR pin for initialization.