Agilex™ 7 FPGA F-Series Transceiver-SoC Development Kit (P-Tile and E-Tile)
The Agilex™ 7 FPGA F-Series Transceiver-SoC development kit offers a complete design environment that includes hardware and software for developing Agilex™ 7 FPGA F-Series designs. This kit is recommended for developing custom Arm processor-based SoC designs and evaluating transceiver performance.
Learn more about Agilex™ 7 FPGA F-Series devices ›
Use this Agilex™ 7 FPGA F-Series FPGA Transceiver-SoC Development Kit to:
- Evaluate SoC designs with the hard processor system (HPS).
- Evaluate transceiver performance up to 58 Gbps for E-Tile.
- Generate and check pseudo-random binary sequence (PRBS) patterns.
- Dynamically change differential output voltage (VOD) pre-emphasis and equalization settings to optimize transceiver performance for your channel.
- Perform jitter analysis.
Table 1. Ordering Information
| Ordering Code | Check Distributor Availability | Agilex™ 7 FPGA F-Series Device |
|---|---|---|
| DK-SI-AGF014EB | AGFB014R24B2E2V |
Table 2. Development Kit Contents and Features
| What is Included | |
|---|---|
Board |
Agilex™ 7 FPGA F-Series Transceiver-SoC Development Board mounted with Agilex™ 7 FPGA F-Series, 1400 KLE, 2486A package. |
Device |
AGFB014R24B2E2V |
Form Factor |
Table Top |
Features and Connectors |
Transceiver interfaces include MXP, QSFP-DD and QSFP28 IO48 Interface for HPS daughtercards
QSPI flash daughtercard AC adapter power cables Ethernet and USB cables |
DDR Memory |
On-board DDR4 memory (8GB) SODIMM interface -8GB DDR4 SODIMM module (included) |
(QSFP) Cages |
2x Quad small-form-factor pluggable double density (QSFP-DD) cage. Quad Small Form-Factor Pluggable 28 (QSFP28) |
HPS interface |
Supporting ETH, UART, SD card socket, eMMC and Mictor connector. IO48 interface for HPS OOBE (Out of Box Experience) and NAND daughter cards. Flash slot 1 interface for Queued Serial Peripheral Interface (QSPI) and Secure Digital and MultiMediaCard (SDMMC) flash daughter cards (AS and SD/MMC configuration modes). Flash slot 2 interface for QSPI and CFI NOR flash daughter cards (AvST configuration mode). |
Cables and Adapters |
USB2.0 Type B cable Ethernet cable 240W power adapter and NA/EU/JP/UK cords ATX power convert cable - 24 pin to 6 pin |
Software |
For DK-SI-AGF014EB
For DK-SI-AGF014EA
For DK-SI-AGF014E3ES
Notes: Refer to Intel® FPGA Software Installation and Licensing for Quartus Prime software download. Refer to Intel® SoC FPGA Embedded Development Suite (EDS) and Arm Development Studio for more information. Refer to the DCL letter included in your development kit purchase for step-by-step instructions on how to activate Arm DS. |
Table 3. Documentation
| Design Files | Content Description |
|---|---|
Documentation about setting up the development kit and using the included software (Quartus® Prime and installer package). |
|
Installer Package DK-SI-AGF014EB (v24.3 or higher) |
A single installation file containing:
Download and unzip the Design Files first, then install the Board Test System. Note: Please see KDB if experiencing JTAG server Timeout when configuring with Quartus® Prime software v20.4. |
Board Schematic |
|
| Agilex™ 7 FPGA F-Series GSRD (Golden System Reference Design) | The Agilex™ 7 FPGA F-Series GSRD page on Rocketboards.org has instructions for getting started on hardware and software designs that utilize the HPS (hard processor system) on Agilex™ 7 FPGA F-Series. |
Note:
Buyer represents that it is a product developer, software developer or system integrator and acknowledges that this product is an evaluation kit that is not FCC authorized, is made available solely for evaluation and software development, and may not be resold.
Additional Resources
Design Store
Altera® FPGA design examples provide efficient solutions for common design challenges. Visit the Design Store for Altera® FPGAs and RocketBoards.org to learn more.
Support Community
Find solutions, view comments and engage with other Intel® users around the world.