GTS Serial Lite IV Intel® FPGA IP User Guide

ID 813966
Date 8/05/2024
Public
Document Table of Contents

6.3. MAC Signals

Table 21.  TX MAC Signals In this table, N represents the number of lanes set in the IP parameter editor.
Name Width Direction Clock Domain Description
tx_avs_ready 1 Output tx_core_clkout

Avalon® streaming signal.

When asserted, indicates that the TX MAC is ready to accept data.

tx_avs_data

64*N Input tx_core_clkout

Avalon® streaming signal.

TX data.

tx_avs_channel 8 Input tx_core_clkout

Avalon® streaming signal.

The channel number for data being transferred on the current cycle.

This signal is not available in Basic mode.

tx_avs_valid 1 Input tx_core_clkout

Avalon® streaming signal.

When asserted, indicates the TX data signal is valid.

tx_avs_startofpacket 1 Input tx_core_clkout

Avalon® streaming signal.

When asserted, indicates the start of a TX data packet.

Assert for only a single clock cycle for each packet.

This signal is not available in Basic mode.

tx_avs_endofpacket 1 Input tx_core_clkout

Avalon® streaming signal.

When asserted, indicates the end of a TX data packet.

Assert for only a single clock cycle for each packet.

This signal is not available in Basic mode.

tx_avs_empty 5 Input tx_core_clkout

Avalon® streaming signal.

Indicates the number of non-valid words in the final burst of the TX data.

This signal is not available in Basic mode.

  • When N = 1, and 2: only bit[0] is valid
  • When N = 3, and 4: only bits[1:0] are valid
tx_num_valid_bytes_eob 4 Input tx_core_clkout

Indicates the number of valid bytes in the last word of the final burst.

This signal is not available in Basic mode.

tx_is_usr_cmd 1 Input tx_core_clkout

When asserted, this signal initiate a user-defined information cycle.

Assert this signal at the same clock cycle as tx_startofpacket assertion.

This signal is not available in Basic mode.

tx_link_up 1 Output tx_core_clkout

When asserted, indicates the TX data link is ready for data transmission.

tx_link_reinit 1 Input tx_core_clkout

When asserted, this signal initiates lanes re-alignment.

Assert this signal for one clock cycle to trigger the MAC to send ALIGN CW.

crc_error_inject N Input tx_core_clkout When asserted, the MAC injects a CRC32 error to selected lanes.
tx_error 5 Output tx_core_clkout Not used.

The following timing diagram shows an example of TX data transmissions of 10 words from user logic across 10 TX serial lanes.

Figure 26. TX Data Transmission Timing Diagram
Table 22.  RX MAC SignalsIn this table, N represents the number of lanes set in the IP parameter editor.
Name Width Direction Clock Domain Description
rx_avs_ready 1 Input rx_core_clkout

Avalon® streaming signal.

When asserted, indicates that the user logic is ready to accept data.

rx_avs_data

64*N Output rx_core_clkout

Avalon® streaming signal.

RX data.
rx_avs_channel 8 Output rx_core_clkout

Avalon® streaming signal.

The channel number for data being received on the current cycle.

This signal is not available in Basic mode.

rx_avs_valid 1 Output rx_core_clkout

Avalon® streaming signal.

When asserted, indicates the RX data signal is valid.

rx_avs_startofpacket 1 Output rx_core_clkout

Avalon® streaming signal.

When asserted, indicates the start of an RX data packet.

Assert for only a single clock cycle for each packet.

This signal is not available in Basic mode.

rx_avs_endofpacket 1 Output rx_core_clkout

Avalon® streaming signal.

When asserted, indicates the end of an RX data packet.

Assert for only a single clock cycle for each packet.

This signal is not available in Basic mode.

rx_avs_empty 5 Output rx_core_clkout

Avalon® streaming signal.

Indicates the number of non-valid words in the final burst of the RX data.

This signal is not available in Basic mode.

  • When N = 1, and 2: only bit[0] is valid
  • When N = 3, and 4: only bits[1:0] are valid
rx_num_valid_bytes_eob 4 Output rx_core_clkout

Indicates the number of valid bytes in the last word of the final burst.

This signal is not available in Basic mode.

rx_is_usr_cmd 1 Output rx_core_clkout

When asserted, this signal initiate a user-defined information cycle.

Assert this signal at the same clock cycle as tx_startofpacket assertion.

This signal is not available in Basic mode.

rx_link_up 1 Output rx_core_clkout

When asserted, indicates the RX data link is ready for data reception.

rx_link_reinit 1 Input rx_core_clkout

When asserted, this signal initiates lanes re-alignment.

If you disable Enable Auto Alignment, assert this signal for one clock cycle to trigger the MAC to re-align the lanes. If the Enable Auto Alignment is set, the MAC re-align the lanes automatically.

Do not assert this signal when Enable Auto Alignment is set.

rx_error (N*2)+3 Output rx_core_clkout

When asserted, indicates error conditions occur in the RX datapath.

  • [(N*2+2):N+3] = Indicates PCS error for specific lane.
  • [N+2] = Indicates alignment error. Re-initialize lane alignment if this bit is asserted.
  • [N+1]= Indicates data is forwarded to the user logic when user logic is not ready.
  • [N] = Indicates loss of alignment.
  • [(N-1):0] = Indicates the data contains CRC error.