Triple-Speed Ethernet Intel® FPGA IP Design Example User Guide: Agilex™ 5 FPGAs and SoCs

Download PDF
ID 813899
Date 4/01/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver 3. Document Revision History for the Triple-Speed Ethernet Intel® FPGA IP Design Example User Guide: Agilex™ 5 FPGAs and SoCs
1. Quick Start Guide x
1.1. Directory Structure 1.2. Generating the Design Example 1.3. Simulating the Triple-Speed Ethernet Intel® FPGA IP Design Example Testbench 1.4. Compiling the Design Example
1.2. Generating the Design Example x
1.2.1. Design Example Parameters
2. 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation 2.5. Interface Signals
2.3. Functional Description x
2.3.1. Design Components
2.4. Simulation x
2.4.1. Testbench
1. Quick Start Guide
2. 10/100/1000 Ethernet MAC Design Example with 1000BASE-X/SGMII 2XTBI PCS with GTS Transceiver
3. Document Revision History for the Triple-Speed Ethernet Intel® FPGA IP Design Example User Guide: Agilex™ 5 FPGAs and SoCs

2.3.1. Design Components

Table 5.  Design Components
Component Description
Triple-Speed Ethernet Intel® FPGA IP

The Triple-Speed Ethernet Intel® FPGA IP (intel_eth_tse) is instantiated with the following configuration:

  • Core Configurations:
    • Core Variation: 10/100/1000Mb Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS
    • Interface: MII/GMII
    • Use internal FIFO: Selected
    • Number of ports: 1
    • Transceiver type: GTS
  • MAC Options:
    • Enable local loopback on MII/GMII: Not selected
    • Enable supplemental MAC unicast addresses: Not selected
    • Include statistics counters: Selected
    • Enable 64-bit statistics byte counters: Not selected
    • Include multicast hashtable: Not selected
    • Align packet headers to 32-bit boundary: Not selected
    • Enable full-duplex flow control: Not selected
    • Enable VLAN detection: Not selected
    • Enable magic packet detection: Selected
    • Enable MAC 10/100 half duplex support: Not selected
  • FIFO Options:
    • Width: 32 bits
    • Depth:
      • Transmit: 4096 x 32 bits
      • Receive: 4096 x 32 bits
  • PCS/Transceiver Options:
    • Enable SGMII bridge: Selected
    • PHY ID (32 bit): 0x01010101
Client Logic Generates and monitors packets sent or received through the IP.
JTAG to Avalon® memory-mapped interface Address Decoder Convert JTAG Signals for Avalon® memory-mapped interface.
IOPLL Generates 125 MHz and 62.5 MHz clocks for Triple-Speed Ethernet.
GTS Reset Sequencer Supports GTS Transceiver for Triple-Speed Ethernet IP.
Level Two Title