Intel Agilex® 7 Clocking and PLL User Guide: M-Series

Download PDF
ID 769001
Date 8/14/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Intel Agilex® 7 FPGA M-Series Clocking and PLL Overview 2. M-Series Clocking and PLL Architecture and Features 3. M-Series Clocking and PLL Design Considerations 4. Clock Control Intel® FPGA IP Core 5. IOPLL Intel® FPGA IP Core 6. Intel Agilex 7 Clocking and PLL User Guide: M-Series Archives 7. Document Revision History for the Intel Agilex® 7 Clocking and PLL User Guide: M-Series
1. Intel Agilex® 7 FPGA M-Series Clocking and PLL Overview x
1.1. Clock Networks Overview 1.2. PLLs Overview
2. M-Series Clocking and PLL Architecture and Features x
2.1. Clock Networks Architecture and Features 2.2. PLLs Architecture and Features
2.1. Clock Networks Architecture and Features x
2.1.1. Clock Network Architecture 2.1.2. Clock Resources 2.1.3. Clock Control Features
2.1.1. Clock Network Architecture x
2.1.1.1. Clock Network Hierarchy 2.1.1.2. Clock Sectors 2.1.1.3. Programmable Clock Routing
2.1.3. Clock Control Features x
2.1.3.1. Clock Gating 2.1.3.2. Clock Divider
2.1.3.1. Clock Gating x
2.1.3.1.1. Root Clock Gate 2.1.3.1.2. Sector Clock Gate 2.1.3.1.3. I/O PLL Clock Gate 2.1.3.1.4. LAB Clock Gate
2.2. PLLs Architecture and Features x
2.2.1. PLL Features 2.2.2. PLL Usage 2.2.3. PLL Locations 2.2.4. PLL Architecture 2.2.5. PLL Control Signals 2.2.6. PLL Feedback Modes 2.2.7. Clock Multiplication and Division 2.2.8. Programmable Phase Shift 2.2.9. Programmable Duty Cycle 2.2.10. PLL Cascading 2.2.11. PLL Input Clock Switchover 2.2.12. PLL Reconfiguration and Dynamic Phase Shift 2.2.13. PLL Calibration
2.2.5. PLL Control Signals x
2.2.5.1. Reset 2.2.5.2. Locked
2.2.6. PLL Feedback Modes x
2.2.6.1. Direct Compensation Mode 2.2.6.2. LVDS Compensation Mode 2.2.6.3. Source Synchronous Compensation Mode 2.2.6.4. Normal Compensation Mode 2.2.6.5. Zero-Delay Buffer Mode 2.2.6.6. External Feedback Mode
2.2.11. PLL Input Clock Switchover x
2.2.11.1. Automatic Switchover 2.2.11.2. Automatic Switchover with Manual Override 2.2.11.3. Manual Clock Switchover
2.2.13. PLL Calibration x
2.2.13.1. Power-Up Calibration 2.2.13.2. User Calibration 2.2.13.3. Static Phase Error Calibration 2.2.13.4. Output Clock Duty Cycle Correction
3. M-Series Clocking and PLL Design Considerations x
3.1. Guidelines: Clock Switchover 3.2. Guidelines: Timing Closure 3.3. Guidelines: Resetting the PLL 3.4. Guidelines: Configuration Constraints 3.5. Clocking Constraints 3.6. IP Core Constraints 3.7. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
4. Clock Control Intel® FPGA IP Core x
4.1. Release Information for Clock Control Intel® FPGA IP 4.2. Clock Control IP Core Parameters 4.3. Clock Control IP Core Ports and Signals
5. IOPLL Intel® FPGA IP Core x
5.1. Release Information for IOPLL Intel® FPGA IP 5.2. IOPLL IP Core Parameters 5.3. IOPLL IP Core Ports and Signals
5.2. IOPLL IP Core Parameters x
5.2.1. IOPLL IP Core Parameters - PLL Tab 5.2.2. IOPLL IP Core Parameters - Settings Tab 5.2.3. IOPLL IP Core Parameters - Cascading Tab 5.2.4. IOPLL IP Core Parameters - Advanced Parameters Tab
1. Intel Agilex® 7 FPGA M-Series Clocking and PLL Overview
2. M-Series Clocking and PLL Architecture and Features
3. M-Series Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. Intel Agilex 7 Clocking and PLL User Guide: M-Series Archives
7. Document Revision History for the Intel Agilex® 7 Clocking and PLL User Guide: M-Series

5.2.3. IOPLL IP Core Parameters - Cascading Tab

Table 10.   IOPLL IP Core Parameters - Cascading Tab
Parameter Value Description
Connect to an upstream PLL through Core clock Network Cascading (create a permit_cal input signal) On or Off Turn on to create an input port to enable destination (downstream) PLL power-up calibration. Connect source (upstream) PLL locked signal to this input port.
Connect outclk to a downstream PLL through Core Clock Network Cascading On or Off Turn on to configure the PLL as an upstream PLL. Connect (upstream) PLL output clock signal to the refclk port of (downstream) PLL.
cascade_out source 0 5–6 Specifies which output clock to be used as cascading source.
Create an adjpllin or cclk signal to connect with an upstream PLL 0 On or Off Turn on to create an input port, which indicates that this PLL is a destination and connects with a source (upstream) PLL.
Create a cascade_out signal to connect to a downstream PLL. On or Off Turn on to create the cascade_out port, which indicates that this PLL is a source and connects with a destination (downstream) PLL.
Level Two Title