Visible to Intel only — GUID: mwh1410384903652
Ixiasoft
Visible to Intel only — GUID: mwh1410384903652
Ixiasoft
4.5. LAI Core Parameters
The table lists the LAI file core parameters:
Parameter | Range Value | Description |
---|---|---|
Pin Count | 1 - 255 | Number of pins dedicated to the LAI. You must connect the pins to a debug header on the board. Within the device, The Compiler maps each pin to a user-configurable number of internal signals. |
Bank Count | 1 - 255 | Number of internal signals that you want to map to each pin. For example, a Bank Count of 8 implies that you connect eight internal signals to each pin. |
Output/Capture Mode | Specifies the acquisition mode. The two options are:
|
|
Clock | Specifies the sample clock. You can use any signal in the design as a sample clock. However, for best results, use a clock with an operating frequency fast enough to sample the data that you want to acquire.
Note: The Clock parameter is available only when Output/Capture Mode is set to Registered State.
|
|
Power-Up State | Specifies the power-up state of the pins designated for use with the LAI. You can select tri-stated for all pins, or selecting a particular bank that you enable. |