1.2.2. Removed Features and Functions
The functions and features listed in this section have been removed from Intel® Quartus® Prime Pro Edition Version 21.3 or earlier.
Features and Functions Removed from Intel® Quartus® Prime Pro Edition Version 21.3
- Removed ModelSim*-Intel® FPGA Edition and ModelSim*-Intel® FPGA Starter Edition
This simulation software has been replaced by Questa*-Intel® FPGA Edition and Questa*-Intel® FPGA Starter Edition respectively.
- Removed support for 32-bit simulation software.
This change removes support for the following simulation tools:
- Aldec* Active-HDL* (32-bit)
Use a 64-bit version of Aldec* Active-HDL* or use Aldec* Riviera-PRO* instead.
- Mentor Graphics* ModelSim* PE
Use Siemens* EDA ModelSim* SE or Siemens* EDA Questa* Advanced Simulator instead.
- Aldec* Active-HDL* (32-bit)
- Removed NicheStack TCP/IP Stack.
Features and Functions Removed from Intel® Quartus® Prime Pro Edition Version 21.2
No features or functions have been removed from Intel® Quartus® Prime Pro Edition Version 21.2.
Features and Functions Removed from Intel® Quartus® Prime Pro Edition Version 21.1
- Removed support for Cadence* Incisive* Enterprise Simulator (IES).
- Removed Rapid Recompile flow.
- For Intel® Stratix® 10 devices, removed support for the following Active Serial configuration clock (AS_CLK) frequencies: 133 MHz, 108 MHz.
Features and Functions Removed from Intel® Quartus® Prime Pro Edition Version 20.4
No features or functions have been removed from Intel® Quartus® Prime Pro Edition Version 20.4.