Triple-Speed Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide

Download PDF
ID 683551
Date 4/30/2024
Public
Document Table of Contents
Document Table of Contents x
1. 10/100/1000Mb Ethernet MAC (Fifoless) Design Example with 1000BASE-X/SGMII 2XTBI PCS with E-Tile GXB Transceiver 2. 10/100/1000Mb Ethernet MAC (Fifoless) Design Example with IEEE1588v2 and 1000BASE-X/SGMII 2XTBI PCS with E-Tile GXB Transceiver 3. Triple-Speed Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide Archives 4. Document Revision History for the Triple-Speed Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide
1. 10/100/1000Mb Ethernet MAC (Fifoless) Design Example with 1000BASE-X/SGMII 2XTBI PCS with E-Tile GXB Transceiver x
1.1. Quick Start Guide 1.2. Design Example Description
1.1. Quick Start Guide x
1.1.1. Directory Structure 1.1.2. Generating the Design Example 1.1.3. Simulating the Triple-Speed Ethernet Intel® FPGA IP Design Example Testbench 1.1.4. Compiling and Configuring the Design Example in Hardware
1.1.2. Generating the Design Example x
1.1.2.1. Design Example Parameters
1.2. Design Example Description x
1.2.1. Features 1.2.2. Hardware and Software Requirements 1.2.3. Functional Description 1.2.4. Simulation 1.2.5. Hardware Testing 1.2.6. Interface Signals
1.2.3. Functional Description x
1.2.3.1. Design Components
1.2.4. Simulation x
1.2.4.1. Testbench
1.2.5. Hardware Testing x
1.2.5.1. Test Procedure
2. 10/100/1000Mb Ethernet MAC (Fifoless) Design Example with IEEE1588v2 and 1000BASE-X/SGMII 2XTBI PCS with E-Tile GXB Transceiver x
2.1. Quick Start Guide 2.2. Design Example Description
2.1. Quick Start Guide x
2.1.1. Directory Structure 2.1.2. Generating the Design Example 2.1.3. Simulating the Triple-Speed Ethernet Intel® FPGA IP Design Example Testbench 2.1.4. Compiling and Configuring the Design Example in Hardware
2.1.2. Generating the Design Example x
2.1.2.1. Design Example Parameters
2.1.3. Simulating the Triple-Speed Ethernet Intel® FPGA IP Design Example Testbench x
2.1.3.1. Procedure
2.2. Design Example Description x
2.2.1. Features 2.2.2. Hardware and Software Requirements 2.2.3. Functional Description 2.2.4. Simulation 2.2.5. Hardware Testing 2.2.6. Interface Signals 2.2.7. Configuration Registers
2.2.3. Functional Description x
2.2.3.1. Design Components 2.2.3.2. Clocking Scheme
2.2.5. Hardware Testing x
2.2.5.1. Test Procedure
2.2.7. Configuration Registers x
2.2.7.1. Register Access Definition 2.2.7.2. Triple-Speed Ethernet Register Map 2.2.7.3. Traffic Controller Register Map 2.2.7.4. TOD Register Map
1. 10/100/1000Mb Ethernet MAC (Fifoless) Design Example with 1000BASE-X/SGMII 2XTBI PCS with E-Tile GXB Transceiver
2. 10/100/1000Mb Ethernet MAC (Fifoless) Design Example with IEEE1588v2 and 1000BASE-X/SGMII 2XTBI PCS with E-Tile GXB Transceiver
3. Triple-Speed Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide Archives
4. Document Revision History for the Triple-Speed Ethernet Stratix® 10 Intel® FPGA IP Design Example User Guide

1.2.6. Interface Signals

Table 6.  Interface Signals for 10/100/1000Mb Ethernet MAC (Fifoless) Design Example with 1000BASE-X/SGMII 2XTBI PCS with E-Tile GXB Transceiver
Signal Direction Description
pll_refclk0 Input

Reference clock for the E-tile Native PHY transceiver. Set this clock to 156.25 MHz.
iopll_refclk Input Reference clock for IOPLL. Set this clock to 100 MHz. The output frequencies are 125 MHz and 62.5 MHz. The clocks driven out are tx_clk_125,rx_clk_125, tx_clk_62_5, and rx_clk_62_5.
reg_clk Input Clock for configuring CSR registers. Set this clock to a frequency less than or equal to 125 MHz.
tx_serial_data Output Positive signal for the transmitter serial data.
tx_serial_data_n Output Negative signal for the transmitter serial data.
rx_serial_data Input Positive signal for the receiver serial data.
rx_serial_data_n Input Negative signal for the receiver serial data.
channel_ready_n Output When deasserted, this signal indicates that the Native PHY RX and TX datapath resets sequencing are completed and the rx_is_lockedtodata signal of Native PHY is asserted.
Related Information
Level Two Title