R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683501
Date 4/10/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express 2. IP Architecture and Functional Description 3. Advanced Features 4. Interfaces 5. Parameters 6. Troubleshooting/Debugging 7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives 8. Document Revision History for the R-Tile Avalon® Streaming Intel FPGA IP for PCI Express User Guide A. Configuration Space Registers B. Root Port Enumeration C. Implementation of Address Translation Services (ATS) in Endpoint Mode D. Packets Forwarded to the User Application in TLP Bypass Mode E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express x
1.1. Overview 1.2. Features 1.3. Release Information 1.4. Device Family Support 1.5. Performance and Resource Utilization 1.6. IP Core Support Levels
1.1. Overview x
1.1.1. Standards and Specifications Compliance
1.2. Features x
1.2.1. Multifunction and Virtualization Features
2. IP Architecture and Functional Description x
2.1. Overview 2.2. PCIe Hard IP Mode 2.3. PIPE Direct Mode
2.2. PCIe Hard IP Mode x
2.2.1. Clocking 2.2.2. Reset 2.2.3. PCI Express Protocol Stack
2.2.2. Reset x
2.2.2.1. Single PERST 2.2.2.2. Independent PERST
2.2.2.2. Independent PERST x
2.2.2.2.1. REFCLK and PERST Guidelines when Using Independent PERST
2.2.3. PCI Express Protocol Stack x
2.2.3.1. PMA 2.2.3.2. Data Link Layer Overview 2.2.3.3. Transaction Layer Overview
2.2.3.3. Transaction Layer Overview x
2.2.3.3.1. Deferrable Memory Write (DMWr)
2.3. PIPE Direct Mode x
2.3.1. Clocking 2.3.2. Reset 2.3.3. PIPE Layer
3. Advanced Features x
3.1. PCIe Port Bifurcation and PHY Channel Mapping 3.2. Virtualization Support 3.3. TLP Bypass Mode
3.2. Virtualization Support x
3.2.1. SR-IOV Support 3.2.2. VirtIO Support
3.2.1. SR-IOV Support x
3.2.1.1. SR-IOV Supported Features List 3.2.1.2. Implementation 3.2.1.3. VF to PF Mapping 3.2.1.4. Function Level Reset (FLR)
3.2.1.2. Implementation x
3.2.1.2.1. VF Error Flag Interface (for x16/x8 Cores Only)
3.2.2. VirtIO Support x
3.2.2.1. VirtIO Supported Features List 3.2.2.2. Overview 3.2.2.3. Parameters 3.2.2.4. VirtIO PCI Configuration Access Interface 3.2.2.5. Registers
3.2.2.5. Registers x
3.2.2.5.1. VirtIO Common Configuration Capability Register (Address: 0x012) 3.2.2.5.2. VirtIO Common Configuration BAR Indicator Register (Address: 0x013) 3.2.2.5.3. VirtIO Common Configuration BAR Offset Register (Address: 0x014) 3.2.2.5.4. VirtIO Common Configuration Structure Length Register (Address 0x015) 3.2.2.5.5. VirtIO Notifications Capability Register (Address: 0x016) 3.2.2.5.6. VirtIO Notifications BAR Indicator Register (Address: 0x017) 3.2.2.5.7. VirtIO Notifications BAR Offset Register (Address: 0x018) 3.2.2.5.8. VirtIO Notifications Structure Length Register (Address: 0x019) 3.2.2.5.9. VirtIO Notifications Notify Off Multiplier Register (Address: 0x01A) 3.2.2.5.10. VirtIO ISR Status Capability Register (Address: 0x02F) 3.2.2.5.11. VirtIO ISR Status BAR Indicator Register (Address: 0x030) 3.2.2.5.12. VirtIO ISR Status BAR Offset Register (Address: 0x031) 3.2.2.5.13. VirtIO ISR Status Structure Length Register (Address: 0x032) 3.2.2.5.14. VirtIO Device Specific Capability Register (Address: 0x033) 3.2.2.5.15. VirtIO Device Specific BAR Indicator Register (Address: 0x034) 3.2.2.5.16. VirtIO Device Specific BAR Offset Register (Address 0x035) 3.2.2.5.17. VirtIO Device Specific Structure Length Register (Address: 0x036) 3.2.2.5.18. VirtIO PCI Configuration Access Capability Register (Address: 0x037) 3.2.2.5.19. VirtIO PCI Configuration Access BAR Indicator Register (Address: 0x038) 3.2.2.5.20. VirtIO PCI Configuration Access BAR Offset Register (Address: 0x039) 3.2.2.5.21. VirtIO PCI Configuration Access Structure Length Register (Address: 0x03A) 3.2.2.5.22. VirtIO PCI Configuration Access Data Register (Address: 0x03B)
3.3. TLP Bypass Mode x
3.3.1. Overview 3.3.2. Register Settings for the TLP Bypass Mode 3.3.3. Hard IP Reconfiguration Interface 3.3.4. Avalon® Streaming Interface
3.3.2. Register Settings for the TLP Bypass Mode x
3.3.2.1. TLPBYPASS_ERR_EN (Address 0x1314) 3.3.2.2. TLPBYPASS_ERR_STATUS (Address 0x1310)
3.3.4. Avalon® Streaming Interface x
3.3.4.1. Configuration TLP 3.3.4.2. Transmit Interface 3.3.4.3. Receive Interface 3.3.4.4. Malformed TLP 3.3.4.5. ECRC
4. Interfaces x
4.1. Clocks and Resets 4.2. Serial Data Interface 4.3. PCI Express Mode 4.4. PIPE Direct Mode
4.1. Clocks and Resets x
4.1.1. Clocks 4.1.2. Resets
4.3. PCI Express Mode x
4.3.1. Avalon® Streaming Interface 4.3.2. Precision Time Measurement (PTM) Interface (Endpoint Only) 4.3.3. Interrupt Interface 4.3.4. Hard IP Reconfiguration Interface 4.3.5. Error Interface 4.3.6. Completion Timeout Interface 4.3.7. Configuration Intercept Interface 4.3.8. Power Management Interface 4.3.9. Hard IP Status Interface 4.3.10. Page Request Services (PRS) Interface (Endpoint Only) 4.3.11. Function-Level Reset (FLR) Interface (Endpoint Only) 4.3.12. SR-IOV VF Error Flag Interface (Endpoint Only) 4.3.13. General Purpose VSEC Interface
4.3.1. Avalon® Streaming Interface x
4.3.1.1. TLP Header and Data Alignment for the Avalon® streaming RX and TX Interfaces 4.3.1.2. Credit Control 4.3.1.3. Avalon® Streaming RX Interface 4.3.1.4. Avalon® Streaming TX Interface 4.3.1.5. Tag Allocation
4.3.1.2. Credit Control x
4.3.1.2.1. Credit Interface - Data and Header 4.3.1.2.2. Credit Initialization 4.3.1.2.3. Credit Update/Release 4.3.1.2.4. RX Flow Control Interface 4.3.1.2.5. TX Flow Control Interface
4.3.1.3. Avalon® Streaming RX Interface x
4.3.1.3.1. Application Logic Guidelines for the Avalon Streaming RX Interface
4.3.1.4. Avalon® Streaming TX Interface x
4.3.1.4.1. Application Logic Guidelines for the Avalon Streaming TX Interface 4.3.1.4.2. Avalon® Streaming TX Interface pX_tx_st_ready_o Behavior
4.3.1.5. Tag Allocation x
4.3.1.5.1. Completion Buffer Size
4.3.3. Interrupt Interface x
4.3.3.1. Legacy Interrupts 4.3.3.2. MSI 4.3.3.3. MSI-X
4.3.3.3. MSI-X x
4.3.3.3.1. Implementing MSI-X Interrupts
4.3.8. Power Management Interface x
4.3.8.1. D3Hot Entry 4.3.8.2. D3Hot Exit 4.3.8.3. D3Cold Entry 4.3.8.4. D3Cold Exit
4.3.8.2. D3Hot Exit x
4.3.8.2.1. D3Hot Exit Initiated by Host 4.3.8.2.2. D3Hot Exit Initiated by EP
4.4. PIPE Direct Mode x
4.4.1. Data Signals 4.4.2. Command and Status Signals 4.4.3. Message Bus Signals 4.4.4. Deskew Signals 4.4.5. PIPE Direct Reset Sequence 4.4.6. PIPE Direct Speed Change 4.4.7. PIPE Lane Reset Staggering 4.4.8. Unused Lanes in PIPE Direct Mode
4.4.1. Data Signals x
4.4.1.1. Transmit Signals 4.4.1.2. Receive Signals
4.4.4. Deskew Signals x
4.4.4.1. MAC to PHY (M2P) Signals 4.4.4.2. PHY to MAC (P2M) Signals
5. Parameters x
5.1. Top-Level Settings 5.2. Core Parameters
5.2. Core Parameters x
5.2.1. Avalon Parameters 5.2.2. Base Address Registers 5.2.3. PCI Express and PCI Capabilities Parameters
5.2.3. PCI Express and PCI Capabilities Parameters x
5.2.3.1. Device Capabilities 5.2.3.2. VirtIO Parameters 5.2.3.3. Link Capabilities 5.2.3.4. Legacy Interrupt Pin Register 5.2.3.5. MSI Capabilities 5.2.3.6. MSI-X Capabilities 5.2.3.7. Slot Capabilities 5.2.3.8. Latency Tolerance Reporting (LTR) 5.2.3.9. Process Address Space ID (PASID) 5.2.3.10. Device Serial Number Capability 5.2.3.11. Page Request Service (PRS) 5.2.3.12. Access Control Service (ACS) 5.2.3.13. Power Management 5.2.3.14. Vendor Specific Extended Capability (VSEC) Registers 5.2.3.15. TLP Processing Hints (TPH) 5.2.3.16. Address Translation Services (ATS) Capabilities 5.2.3.17. Precision Time Management (PTM)
6. Troubleshooting/Debugging x
6.1. Hardware Debug 6.2. Operating System Tools and Utilities 6.3. Signal Tap Logic Analyzer 6.4. Using the Hard IP Reconfiguration Interface for Debugging 6.5. Other Interfaces That Can Be Used for Debug Activities 6.6. Debug Toolkit
6.1. Hardware Debug x
6.1.1. Debugging Link Training Issues 6.1.2. Debugging Device Enumeration Issues 6.1.3. Debugging Data Transfer and Performance Issues
6.1.3. Debugging Data Transfer and Performance Issues x
6.1.3.1. Advanced Error Reporting (AER)
6.2. Operating System Tools and Utilities x
6.2.1. Using lspci Utility to Read Negotiated Link Speed
6.4. Using the Hard IP Reconfiguration Interface for Debugging x
6.4.1. Using the Hard IP Reconfiguration Interface to Enable and Read ECRC and LCRC Error Counts
6.6. Debug Toolkit x
6.6.1. Overview 6.6.2. Enabling the R-Tile Debug Toolkit 6.6.3. Launching the R-tile Debug Toolkit 6.6.4. Using the R-Tile Debug Toolkit
6.6.4. Using the R-Tile Debug Toolkit x
6.6.4.1. R-Tile Information 6.6.4.2. Event Counters 6.6.4.3. Link Inspector 6.6.4.4. Configuration Space 6.6.4.5. Channel Parameters
6.6.4.5. Channel Parameters x
6.6.4.5.1. General PHY 6.6.4.5.2. Tx Path 6.6.4.5.3. Rx Path 6.6.4.5.4. Lane Margining
C. Implementation of Address Translation Services (ATS) in Endpoint Mode x
C.1. Sending Translated/Untranslated Requests C.2. Sending a Page Request Message from the Endpoint (EP) to the Root Complex (RC) C.3. Invalidating Requests/Completions
D. Packets Forwarded to the User Application in TLP Bypass Mode x
D.1. EP TLP Bypass Mode (Upstream) D.2. RC TLP Bypass Mode (Downstream)
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express x
E.1. Margin Masks Overview E.2. 5x5 Testing Efficiency E.3. Debug Toolkit Margin Methodology
E.2. 5x5 Testing Efficiency x
E.2.1. First Time Testing E.2.2. Spot Check Testing
E.3. Debug Toolkit Margin Methodology x
E.3.1. Debug Toolkit Testing Process
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express
2. IP Architecture and Functional Description
3. Advanced Features
4. Interfaces
5. Parameters
6. Troubleshooting/Debugging
7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives
8. Document Revision History for the R-Tile Avalon® Streaming Intel FPGA IP for PCI Express User Guide
A. Configuration Space Registers
B. Root Port Enumeration
C. Implementation of Address Translation Services (ATS) in Endpoint Mode
D. Packets Forwarded to the User Application in TLP Bypass Mode
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express

4.3.1.4.1. Application Logic Guidelines for the Avalon Streaming TX Interface

The following guidelines must be considered by the Application logic:
  • Application logic must adhere to the requirements for the pX_tx_st_ready_o signal behavior as outlined in Avalon Streaming TX Interface pX_tx_st_ready_o Behavior.
  • Transmission of a TLP must be uninterrupted when pX_tx_st_ready_o is asserted. The application must not deassert pX_tx_stN_valid_i between pX_tx_stN_sop_i and pX_tx_stN_eop_i unless there is backpressure from the R-tile PCIe IP core indicated by the deassertion of pX_tx_st_ready_o.
    Note: Failing to meet this guideline may cause the transmission of a TLP with an invalid LCRC.
  • For the Configuration Mode 0 (1x16) in double-width mode, the start of a TLP (pX_tx_stN_sop_i) can only happen in segment 0 (st0) or segment 2 (st2) (i.e. a given TLP cannot start on segment 1 or segment 3).

  • For Configuration Mode 0 (1x16) in double-width mode, the header for segment 2 (st2_hdr) is allowed depending on the utilization for segment 0 and segment 1. Refer to the table below for the allowed conditions. Note that the table does not include all the signals for the Avalon Streaming TX interface. It only shows the relevant signals to highlight the valid cases where a TLP can be started on segment 2.

    Table 59.  Possible Combinations for the pX_tx_st2_sop_i in Configuration Mode 0 (1x16) Double-width Mode
    pX_tx_st0_sop_i pX_tx_st0_eop_i pX_tx_st0_hvalid_i pX_tx_st0_dvalid_i pX_tx_st1_sop_i pX_tx_st1_eop_i pX_tx_st1_hvalid_i pX_tx_st1_dvalid_i pX_tx_st2_sop_i pX_tx_st2_hvalid_i pX_tx_st2_dvalid_i
    1'b1 1'b1 1'b1 1'b1 1'b0 1'b0 1'b0 1'b0 1'b1 1'b1 1'b1
    1'b1 1'b0 1'b1 1'b1 1'b0 1'b1 1'b0 1'b1 1'b1 1'b1 1'b1
    1'b0 1'b1 1'b0 1'b1 1'b0 1'b0 1'b0 1'b0 1'b1 1'b1 1'b1
    1'b0 1'b0 1'b0 1'b1 1'b0 1'b1 1'b0 1'b1 1'b1 1'b1 1'b1
  • For Configuration Mode 1 (2x8) and Configuration Mode 2 (4x4) in double-width mode, the header for segment 1 (st1_hdr) is allowed depending on the utilization for segment 0. Refer to the table below for the allowed conditions. Note that the table does not include all the signals for the Avalon Streaming TX interface. It only shows the relevant signals to highlight the valid cases where a TLP can be started on segment 1.
    Table 60.  Possible Combinations for the pX_tx_st1_sop_i in Configuration Mode 1 (2x8) and Configuration Mode 2 (4x4), Both in Double-width Mode
    pX_tx_st0_sop_i pX_tx_st0_eop_i pX_tx_st0_hvalid_i pX_tx_st0_dvalid_i pX_tx_st1_sop_i pX_tx_st1_hvalid_i pX_tx_st1_dvalid_i
    1'b1 1'b1 1'b1 1'b1 1'b1 1'b1 1'b1
    1'b0 1'b1 1'b0 1'b1 1'b1 1'b1 1'b1
  • For a single TLP spanning across multiple segments, the application logic needs to send the TLP in the order of the segment index (segment st0 → st1 → st2 → st3 → st0).
  • If the TLP length of the TLP being transmitted is greater than the segment size, the segment used to assert the pX_tx_stN_eop_i signal is dictated by the TLP length.
  • If the TLP length being transmitted is less than the segment size (255 bits), the corresponding pX_tx_stN_eop_i signal needs to happen in the same segment where pX_tx_stN_sop_i is being asserted.
  • The maximum number of clock cycles allowed between the deassertion of pX_tx_st_ready_o and pX_tx_stN_valid_i is 16 coreclkout_hip cycles.
  • For Configuration Mode 0 (1x16) in single-width mode, only one segment can be used per clock cycle (i.e. st0_hdr/st0_data or st1_hdr/st1_data). In addition, If segment 1 is used, st0_data must be used by the previous TLP.
Level Two Title