Visible to Intel only — GUID: sam1395329955677
Ixiasoft
1. Integer Arithmetic Intel® FPGA IP Cores
2. LPM_COUNTER (Counter) IP Core
3. LPM_DIVIDE Intel® FPGA IP Core References
4. LPM_MULT (Multiplier) IP Core
5. LPM_ADD_SUB (Adder/Subtractor)
6. LPM_COMPARE (Comparator)
7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core
8. Intel FPGA Multiply Adder IP Core
9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core
10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core
11. ALTMULT_ADD (Multiply-Adder) IP Core
12. ALTMULT_COMPLEX (Complex Multiplier) IP Core
13. ALTSQRT (Integer Square Root) IP Core
14. PARALLEL_ADD (Parallel Adder) IP Core
15. Integer Arithmetic Intel® FPGA IP Cores User Guide Document Archives
16. Document Revision History for Integer Arithmetic Intel® FPGA IP Cores User Guide
7.1. ALTECC Encoder Features
7.2. Verilog HDL Prototype (ALTECC_ENCODER)
7.3. Verilog HDL Prototype (ALTECC_DECODER)
7.4. VHDL Component Declaration (ALTECC_ENCODER)
7.5. VHDL Component Declaration (ALTECC_DECODER)
7.6. VHDL LIBRARY_USE Declaration
7.7. Encoder Ports
7.8. Decoder Ports
7.9. Encoder Parameters
7.10. Decoder Parameters
Visible to Intel only — GUID: sam1395329955677
Ixiasoft
8.1.3. Pre-load Constant
The pre-load constant controls the accumulator operand and complements the accumulator feedback. The valid LOADCONST_VALUE ranges from 0–64. The constant value is equal to 2 N , where N = LOADCONST_VALUE. When the LOADCONST_VALUE is set to 64, the constant value is equal to 0. This function can be used as biased rounding.
The following figure shows the pre-load constant implementation.
Figure 19. Pre-load Constant
Refer to the following IP cores for other multiplier implementations: