Integer Arithmetic Intel® FPGA IP Cores User Guide

Download PDF
ID 683490
Date 7/30/2024
Public
Document Table of Contents
Document Table of Contents x
1. Integer Arithmetic Intel® FPGA IP Cores 2. LPM_COUNTER (Counter) IP Core 3. LPM_DIVIDE Intel® FPGA IP Core References 4. LPM_MULT (Multiplier) IP Core 5. LPM_ADD_SUB (Adder/Subtractor) 6. LPM_COMPARE (Comparator) 7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core 8. Intel FPGA Multiply Adder IP Core 9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core 10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core 11. ALTMULT_ADD (Multiply-Adder) IP Core 12. ALTMULT_COMPLEX (Complex Multiplier) IP Core 13. ALTSQRT (Integer Square Root) IP Core 14. PARALLEL_ADD (Parallel Adder) IP Core 15. Integer Arithmetic Intel® FPGA IP Cores User Guide Document Archives 16. Document Revision History for Integer Arithmetic Intel® FPGA IP Cores User Guide
2. LPM_COUNTER (Counter) IP Core x
2.1. Features 2.2. Verilog HDL Prototype 2.3. VHDL Component Declaration 2.4. VHDL LIBRARY_USE Declaration 2.5. Ports 2.6. Parameters
3. LPM_DIVIDE Intel® FPGA IP Core References x
3.1. Features 3.2. Verilog HDL Prototype 3.3. VHDL Component Declaration 3.4. VHDL LIBRARY_USE Declaration 3.5. Ports 3.6. Parameters
4. LPM_MULT (Multiplier) IP Core x
4.1. Features 4.2. Verilog HDL Prototype 4.3. VHDL Component Declaration 4.4. VHDL LIBRARY_USE Declaration 4.5. Signals 4.6. Parameters for Stratix V, Arria V, Cyclone V, and Cyclone® 10 LP Devices 4.7. Parameters for Stratix® 10, Arria® 10, and Cyclone® 10 GX Devices
4.6. Parameters for Stratix V, Arria V, Cyclone V, and Cyclone® 10 LP Devices x
4.6.1. General Tab 4.6.2. General 2 Tab 4.6.3. Pipelining Tab
4.7. Parameters for Stratix® 10, Arria® 10, and Cyclone® 10 GX Devices x
4.7.1. General Tab 4.7.2. General 2 Tab 4.7.3. Pipelining
5. LPM_ADD_SUB (Adder/Subtractor) x
5.1. Features 5.2. Verilog HDL Prototype 5.3. VHDL Component Declaration 5.4. VHDL LIBRARY_USE Declaration 5.5. Ports 5.6. Parameters
6. LPM_COMPARE (Comparator) x
6.1. Features 6.2. Verilog HDL Prototype 6.3. VHDL Component Declaration 6.4. VHDL LIBRARY_USE Declaration 6.5. Ports 6.6. Parameters
7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core x
7.1. ALTECC Encoder Features 7.2. Verilog HDL Prototype (ALTECC_ENCODER) 7.3. Verilog HDL Prototype (ALTECC_DECODER) 7.4. VHDL Component Declaration (ALTECC_ENCODER) 7.5. VHDL Component Declaration (ALTECC_DECODER) 7.6. VHDL LIBRARY_USE Declaration 7.7. Encoder Ports 7.8. Decoder Ports 7.9. Encoder Parameters 7.10. Decoder Parameters
8. Intel FPGA Multiply Adder IP Core x
8.1. Features 8.2. Verilog HDL Prototype 8.3. VHDL Component Declaration 8.4. VHDL LIBRARY_USE Declaration 8.5. Signals 8.6. Parameters
8.1. Features x
8.1.1. Pre-adder 8.1.2. Systolic Delay Register 8.1.3. Pre-load Constant 8.1.4. Double Accumulator
8.1.1. Pre-adder x
8.1.1.1. Pre-adder Simple Mode 8.1.1.2. Pre-adder Coefficient Mode 8.1.1.3. Pre-adder Input Mode 8.1.1.4. Pre-adder Square Mode 8.1.1.5. Pre-adder Constant Mode
8.6. Parameters x
8.6.1. General Tab 8.6.2. Extra Modes Tab 8.6.3. Multipliers Tab 8.6.4. Preadder Tab 8.6.5. Accumulator Tab 8.6.6. Systolic/Chainout Tab 8.6.7. Pipelining Tab
9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core x
9.1. Features 9.2. Verilog HDL Prototype 9.3. VHDL Component Declaration 9.4. Ports 9.5. Parameters
10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core x
10.1. Features 10.2. Verilog HDL Prototype 10.3. VHDL Component Declaration 10.4. VHDL LIBRARY_USE Declaration 10.5. Ports 10.6. Parameters
11. ALTMULT_ADD (Multiply-Adder) IP Core x
11.1. Features 11.2. Verilog HDL Prototype 11.3. VHDL Component Declaration 11.4. VHDL LIBRARY_USE Declaration 11.5. Ports 11.6. Parameters
12. ALTMULT_COMPLEX (Complex Multiplier) IP Core x
12.1. Complex Multiplication 12.2. Canonical Representation 12.3. Conventional Representation 12.4. Features 12.5. Verilog HDL Prototype 12.6. VHDL Component Declaration 12.7. VHDL LIBRARY_USE Declaration 12.8. Signals 12.9. Parameters
13. ALTSQRT (Integer Square Root) IP Core x
13.1. Features 13.2. Verilog HDL Prototype 13.3. VHDL Component Declaration 13.4. VHDL LIBRARY_USE Declaration 13.5. Ports 13.6. Parameters
14. PARALLEL_ADD (Parallel Adder) IP Core x
14.1. Feature 14.2. Verilog HDL Prototype 14.3. VHDL Component Declaration 14.4. VHDL LIBRARY_USE Declaration 14.5. Ports 14.6. Parameters
1. Integer Arithmetic Intel® FPGA IP Cores
2. LPM_COUNTER (Counter) IP Core
3. LPM_DIVIDE Intel® FPGA IP Core References
4. LPM_MULT (Multiplier) IP Core
5. LPM_ADD_SUB (Adder/Subtractor)
6. LPM_COMPARE (Comparator)
7. ALTECC (Error Correction Code: Encoder/Decoder) IP Core
8. Intel FPGA Multiply Adder IP Core
9. ALTMEMMULT (Memory-based Constant Coefficient Multiplier) IP Core
10. ALTMULT_ACCUM (Multiply-Accumulate) IP Core
11. ALTMULT_ADD (Multiply-Adder) IP Core
12. ALTMULT_COMPLEX (Complex Multiplier) IP Core
13. ALTSQRT (Integer Square Root) IP Core
14. PARALLEL_ADD (Parallel Adder) IP Core
15. Integer Arithmetic Intel® FPGA IP Cores User Guide Document Archives
16. Document Revision History for Integer Arithmetic Intel® FPGA IP Cores User Guide

8.6.2. Extra Modes Tab

Table 31.  Extra Modes Tab
Parameter IP Generated Parameter Value Default Value Description
Outputs Configuration
Register output of the adder unit gui_output_register

On

Off

 Off

Select this option to enable output register of the adder module.

What is the source for clock input? gui_output_register_clock

Clock0

Clock1

Clock2

Clock0 Select Clock0 , Clock1 or Clock2 to enable and specify the clock source for output registers.

You must select Register output of the adder unit to enable this parameter.

What is the source for asynchronous clear input? gui_output_register_aclr

NONE

ACLR0

ACLR1

NONE Specifies the asynchronous clear source for the adder output register.

You must select Register output of the adder unit to enable this parameter.

What is the source for synchronous clear input? gui_output_register_sclr

NONE

SCLR0

SCLR1

NONE Specifies the synchronous clear source for the adder output register.

You must select Register output of the adder unit to enable this parameter.

Adder Operation
What operation should be performed on outputs of the first pair of multipliers? gui_multiplier1_direction

ADD,

SUB,

VARIABLE

ADD

Select addition or subtraction operation to perform for the outputs between the first and second multipliers.

  • Select ADD to perform addition operation.
  • Select SUB to perform subtraction operation.
  • Select VARIABLE to use addnsub1 port for dynamic addition/subtraction control.
When VARIABLE value is selected:
  • Drive addnsub1 signal to high for addition operation.
  • Drive addnsub1 signal to low for subtraction operation.

You must select more than two multipliers to enable this parameter.

Register 'addnsub1' input gui_addnsub_multiplier_register1

On

Off

 Off Select this option to enable input register for addnsub1 port.

You must select VARIABLE for What operation should be performed on outputs of the first pair of multipliers to enable this parameter.

What is the source for clock input? gui_addnsub_multiplier_register1_clock

Clock0

Clock1

Clock2

Clock0 Select Clock0 , Clock1 or Clock2 to specify the input clock signal for addnsub1 register.

You must select Register 'addnsub1' input to enable this parameter.

What is the source for asynchronous clear input? gui_addnsub_multiplier_aclr1

NONE

ACLR0

ACLR1

NONE Specifies the asynchronous clear source for the addnsub1 register.

You must select Register 'addnsub1' input to enable this parameter.

What is the source for synchronous clear input? gui_addnsub_multiplier_sclr1

NONE

SCLR0

SCLR1

NONE Specifies the synchronous clear source for the addnsub1 register.

You must select Register 'addnsub1' input to enable this parameter.

What operation should be performed on outputs of the second pair of multipliers? gui_multiplier3_direction

ADD,

SUB,

VARIABLE

ADD

Select addition or subtraction operation to perform for the outputs between the third and fourth multipliers.

  • Select ADD to perform addition operation.
  • Select SUB to perform subtraction operation.
  • Select VARIABLE to use addnsub1 port for dynamic addition/subtraction control.
When VARIABLE value is selected:
  • Drive addnsub1 signal to high for addition operation.
  • Drive addnsub1 signal to low for subtraction operation.

You must select the value 4 for What is the number of multipliers? to enable this parameter.

Register 'addnsub3' input gui_addnsub_multiplier_register3

On

Off

 Off Select this option to enable input register for addnsub3 signal.

You must select VARIABLE for What operation should be performed on outputs of the second pair of multipliers to enable this parameter.

What is the source for clock input? gui_addnsub_multiplier_register3_clock

Clock0

Clock1

Clock2

Clock0 Select Clock0 , Clock1 or Clock2 to specify the input clock signal for addnsub3 register.

You must select Register 'addnsub3' input to enable this parameter.

What is the source for asynchronous clear input? gui_addnsub_multiplier_aclr3

NONE

ACLR0

ACLR1

NONE Specifies the asynchronous clear source for the addnsub3 register.

You must select Register 'addnsub3' input to enable this parameter.

What is the source for synchronous clear input? gui_addnsub_multiplier_sclr3

NONE

SCLR0

SCLR1

NONE Specifies the synchronous clear source for the addnsub3 register.

You must select Register 'addnsub3' input to enable this parameter.

Polarity
Enable ‘use_subadd’ gui_use_subnadd

On

Off

 Off

Select this option to reverse the function of addnsub input port.

Drive addnsub to high for subtraction operation.

Drive addnsub to low for addition operation.

Level Two Title