AN 699: Using the Altera Ethernet Design Toolkit

Download PDF
ID 683469
Date 5/13/2016
Public
Document Table of Contents
Document Table of Contents x
1. Using the Altera Ethernet Design Toolkit
1. Using the Altera Ethernet Design Toolkit x
1.1. Features 1.2. Hardware and Software Requirements 1.3. Getting Started 1.4. AN 699 Document Revision History
1.3. Getting Started x
1.3.1. Configuring the FPGA and Clock 1.3.2. Launching the Ethernet Design Toolkit 1.3.3. Recommended Flow for Using the Ethernet Design Toolkit
1.3.3. Recommended Flow for Using the Ethernet Design Toolkit x
1.3.3.1. Ethernet Design Toolkit Tabs and Settings
1.3.3.1. Ethernet Design Toolkit Tabs and Settings x
1.3.3.1.1. IP Configuration Tab 1.3.3.1.2. IP Status Tab 1.3.3.1.3. Traffic Controller Tab
1. Using the Altera Ethernet Design Toolkit

1.3.2. Launching the Ethernet Design Toolkit

Use the system console to launch the design toolkit.
  1. Launch the system console from Tools > System Debugging Tools > System Console.
  2. In the Tcl Console panel, type the following command to browse to the SystemConsole_Gui directory: 
    cd <project directory/systemconsole_gui>
  3. Type the following command to launch the Ethernet Design Toolkit GUI: 
    source main_gui.tcl

It may take up to a minute to fully load the toolkit in the system console. The toolkit is fully loaded when the % prompt appears after the % source main_gui.tcl line.

Level Two Title