Generic Serial Flash Interface Intel® FPGA IP User Guide

Download PDF
ID 683419
Date 4/01/2024
Public
Document Table of Contents
Document Table of Contents x
1. Generic Serial Flash Interface Intel® FPGA IP User Guide
1. Generic Serial Flash Interface Intel® FPGA IP User Guide x
1.1. Release Information 1.2. Device Family Support 1.3. Signals 1.4. Parameters 1.5. Register Map 1.6. Using Generic Serial Flash Interface Intel® FPGA IP 1.7. Generic Serial Flash Interface Intel® FPGA IP Reference Design 1.8. Flash Access Using the Generic Serial Flash Interface Intel® FPGA IP 1.9. Intel HAL Driver 1.10. Generic Serial Flash Interface Intel® FPGA IP User Guide Archives 1.11. Document Revision History for the Generic Serial Flash Interface Intel® FPGA IP User Guide
1.6. Using Generic Serial Flash Interface Intel® FPGA IP x
1.6.1. Control Status Register Byte Enable 1.6.2. Memory Operations 1.6.3. Byte Enabling 1.6.4. Constraining the I/O Pins
1.6.3. Byte Enabling x
1.6.3.1. Byte Enabling Supported Patterns
1.6.4. Constraining the I/O Pins x
1.6.4.1. General Purpose I/O 1.6.4.2. Dedicated Active Serial Interface
1.7. Generic Serial Flash Interface Intel® FPGA IP Reference Design x
1.7.1. Hardware and Software Requirements 1.7.2. Functional Description 1.7.3. Creating Nios® II Hardware System 1.7.4. Integrating Modules into Quartus® Prime Project 1.7.5. Programming the .sof File 1.7.6. Building Application Software System using Nios® II Software Build Tools
1.7.2. Functional Description x
1.7.2.1. Reference Design Components 1.7.2.2. Reference Design Application Program
1.7.6. Building Application Software System using Nios® II Software Build Tools x
1.7.6.1. Reference Design Results
1.8. Flash Access Using the Generic Serial Flash Interface Intel® FPGA IP x
1.8.1. Flash Operations that Require Operation Code Perform the Write Enable Operation for the Flash 1.8.2. Flash Operations to Read Flash Registers 1.8.3. Flash Operations to Write Flash Registers 1.8.4. Flash Operations that Require An Address 1.8.5. Read Memory from the Flash 1.8.6. Program Flash
1.9. Intel HAL Driver x
1.9.1. Driver API
1. Generic Serial Flash Interface Intel® FPGA IP User Guide

1.8.1. Flash Operations that Require Operation Code

The following flash operations require an operation code:

  • Write enable
  • Enter 4-byte addressing mode
  • Exit 4-byte addressing mode
  • Clear flag status register
  • Clear status register

The following registers are used for operations that require an operation code:

  • Flash command setting register
  • Flash command control register

Perform the Write Enable Operation for the Flash

proc write_enable { } {
global mp flash_cmd_setting flash_cmd_ctrl flash_cmd_write_data_0
master_write_32 $mp $flash_cmd_setting 0x00000006
master_write_32 $mp $flash_cmd_ctrl 0x1
}

To perform the write enable operation for the flash, follow these steps:

  1. Define the global variables.
  2. Customize the write enable operation by writing to the flash command setting register.
    1. Set bit [7:0] of this register to 06 as 06h is the operation code of the write enable operation.
  3. Write 1 to bit 0 of the flash command control register to start the write enable operation.
Level Two Title