Triple-Speed Ethernet Intel® FPGA IP User Guide

Download PDF
ID 683402
Date 10/07/2024
Public
Document Table of Contents
Document Table of Contents x
1. About This IP 2. Getting Started with Altera IPs 3. Parameter Settings 4. Functional Description 5. Configuration Register Space 6. Interface Signals 7. Design Considerations 8. Timing Constraints 9. Testbench 10. Software Programming Interface 11. Triple-Speed Ethernet Intel® FPGA IP User Guide Archives 12. Document Revision History for the Triple-Speed Ethernet Intel® FPGA IP User Guide A. Ethernet Frame Format B. Simulation Parameters
1. About This IP x
1.1. Release Information 1.2. Device Family Support 1.3. Features 1.4. 10/100/1000 Ethernet MAC Versus Small MAC 1.5. High-Level Block Diagrams 1.6. Example Applications 1.7. IP Verification 1.8. Performance and Resource Utilization
1.7. IP Verification x
1.7.1. Optical Platform 1.7.2. Copper Platform
2. Getting Started with Altera IPs x
2.1. Design Walkthrough 2.2. Generated Files
2.1. Design Walkthrough x
2.1.1. Creating a New Quartus® Prime Project 2.1.2. Generating a Design Example or Simulation Model 2.1.3. Simulating the System 2.1.4. Compiling the Triple-Speed Ethernet Intel® FPGA IP Design 2.1.5. Programming an FPGA Device
2.2. Generated Files x
2.2.1. Design Constraint File No Longer Generated
3. Parameter Settings x
3.1. Core Configuration 3.2. Ethernet MAC Options 3.3. FIFO Options 3.4. Timestamp Options 3.5. PCS/Transceiver Options
4. Functional Description x
4.1. 10/100/1000 Ethernet MAC 4.2. 1000BASE-X/SGMII PCS With Optional Embedded PMA 4.3. Precision Time Protocol 4.4. Deterministic Latency
4.1. 10/100/1000 Ethernet MAC x
4.1.1. MAC Architecture 4.1.2. MAC Interfaces 4.1.3. MAC Transmit Datapath 4.1.4. MAC Receive Datapath 4.1.5. MAC Transmit and Receive Latencies 4.1.6. FIFO Buffer Thresholds 4.1.7. Congestion and Flow Control 4.1.8. Magic Packets 4.1.9. MAC Local Loopback 4.1.10. MAC Error Correction Code (ECC) 4.1.11. MAC Reset 4.1.12. PHY Management (MDIO) 4.1.13. Connecting MAC to External PHYs
4.1.3. MAC Transmit Datapath x
4.1.3.1. IP Payload Re-alignment 4.1.3.2. Address Insertion 4.1.3.3. Frame Payload Padding 4.1.3.4. CRC-32 Generation 4.1.3.5. Interpacket Gap Insertion 4.1.3.6. Collision Detection in Half-Duplex Mode
4.1.4. MAC Receive Datapath x
4.1.4.1. Preamble Processing 4.1.4.2. Collision Detection in Half-Duplex Mode 4.1.4.3. Address Checking 4.1.4.4. Frame Type Validation 4.1.4.5. Payload Pad Removal 4.1.4.6. CRC Checking 4.1.4.7. Length Checking 4.1.4.8. Frame Writing 4.1.4.9. IP Payload Alignment
4.1.4.3. Address Checking x
4.1.4.3.1. Unicast Address Checking 4.1.4.3.2. Multicast Address Resolution
4.1.6. FIFO Buffer Thresholds x
4.1.6.1. Receive Thresholds 4.1.6.2. Transmit Thresholds 4.1.6.3. Transmit FIFO Buffer Underflow
4.1.7. Congestion and Flow Control x
4.1.7.1. Remote Device Congestion 4.1.7.2. Receive FIFO Buffer and Local Device Congestion
4.1.8. Magic Packets x
4.1.8.1. Sleep Mode 4.1.8.2. Magic Packet Detection
4.1.12. PHY Management (MDIO) x
4.1.12.1. MDIO Connection 4.1.12.2. MDIO Frame Format
4.1.13. Connecting MAC to External PHYs x
4.1.13.1. Gigabit Ethernet 4.1.13.2. Programmable 10/100 Ethernet 4.1.13.3. Programmable 10/100/1000 Ethernet Operation
4.2. 1000BASE-X/SGMII PCS With Optional Embedded PMA x
4.2.1. 1000BASE-X/SGMII PCS Architecture 4.2.2. Transmit Operation 4.2.3. Receive Operation 4.2.4. Transmit and Receive Latencies 4.2.5. GMII Converter 4.2.6. SGMII Converter 4.2.7. Auto-Negotiation 4.2.8. Ten-bit Interface 4.2.9. PHY Loopback 4.2.10. PHY Power-Down 4.2.11. 1000BASE-X/SGMII PCS Reset
4.2.2. Transmit Operation x
4.2.2.1. Frame Encapsulation 4.2.2.2. 8b/10b Encoding
4.2.3. Receive Operation x
4.2.3.1. Comma Detection 4.2.3.2. 8b/10b Decoding 4.2.3.3. Frame De-encapsulation 4.2.3.4. Synchronization 4.2.3.5. Carrier Sense 4.2.3.6. Collision Detection
4.2.6. SGMII Converter x
4.2.6.1. Transmit 4.2.6.2. Receive
4.2.7. Auto-Negotiation x
4.2.7.1. 1000BASE-X Auto-Negotiation 4.2.7.2. SGMII Auto-Negotiation
4.2.10. PHY Power-Down x
4.2.10.1. Power-Down in PCS Variations with Embedded PMA
4.3. Precision Time Protocol x
4.3.1. IEEE 1588v2 Supported Configurations 4.3.2. IEEE 1588v2 Features 4.3.3. IEEE 1588v2 Architecture 4.3.4. IEEE 1588v2 Transmit Datapath 4.3.5. IEEE 1588v2 Receive Datapath 4.3.6. IEEE 1588v2 Frame Format
4.3.6. IEEE 1588v2 Frame Format x
4.3.6.1. PTP Frame in IEEE 802.3 4.3.6.2. PTP Frame over UDP/IPv4 4.3.6.3. PTP Frame over UDP/IPv6
5. Configuration Register Space x
5.1. MAC Configuration Register Space 5.2. PCS Configuration Register Space 5.3. Register Initialization
5.1. MAC Configuration Register Space x
5.1.1. Base Configuration Registers (Dword Offset 0x00 – 0x17) 5.1.2. Statistics Counters (Dword Offset 0x18 – 0x38) 5.1.3. Transmit and Receive Command Registers (Dword Offset 0x3A – 0x3B) 5.1.4. Supplementary Address (Dword Offset 0xC0 – 0xC7) 5.1.5. IEEE 1588v2 Feature (Dword Offset 0xD0 – 0xD6) 5.1.6. Deterministic Latency (Dword Offset 0xE1– 0xE3) 5.1.7. IEEE 1588v2 Feature PMA Delay
5.1.1. Base Configuration Registers (Dword Offset 0x00 – 0x17) x
5.1.1.1. Command_Config Register (Dword Offset 0x02)
5.2. PCS Configuration Register Space x
5.2.1. Control Register (Word Offset 0x00) 5.2.2. Status Register (Word Offset 0x01) 5.2.3. Dev_Ability and Partner_Ability Registers (Word Offset 0x04 – 0x05) 5.2.4. An_Expansion Register (Word Offset 0x06) 5.2.5. If_Mode Register (Word Offset 0x14)
5.2.3. Dev_Ability and Partner_Ability Registers (Word Offset 0x04 – 0x05) x
5.2.3.1. 1000BASE-X 5.2.3.2. SGMII MAC Mode Auto Negotiation 5.2.3.3. SGMII PHY Mode Auto Negotiation
5.3. Register Initialization x
5.3.1. Triple-Speed Ethernet System with MII/GMII or RGMII 5.3.2. Triple-Speed Ethernet System with SGMII 5.3.3. Triple-Speed Ethernet System with 1000BASE-X Interface
6. Interface Signals x
6.1. Interface Signals 6.2. Timing
6.1. Interface Signals x
6.1.1. 10/100/1000 Ethernet MAC Signals 6.1.2. 10/100/1000 Multiport Ethernet MAC Signals 6.1.3. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS Signals 6.1.4. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS and Embedded PMA Signals (E-Tile) 6.1.5. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with 1000BASE-X/SGMII 2XTBI PCS Signals 6.1.6. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with IEEE 1588v2 and 1000BASE-X/SGMII 2XTBI PCS Signals 6.1.7. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with IEEE 1588v2, 1000BASE-X/SGMII 2XTBI PCS, SGMII Bridge, and Deterministic Latency Signals 6.1.8. 10/100/1000 Multiport Ethernet MAC with 1000BASE-X/SGMII PCS Signals 6.1.9. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII TBI (LVDS I/O only) PCS Signals 6.1.10. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals 6.1.11. 10/100/1000 Multiport Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals 6.1.12. 1000BASE-X/SGMII PCS Signals 6.1.13. 1000BASE-X/SGMII 2XTBI PCS Signals 6.1.14. 1000BASE-X/SGMII PCS and PMA Signals
6.1.1. 10/100/1000 Ethernet MAC Signals x
6.1.1.1. Clock and Reset Signals 6.1.1.2. Clock Enabler Signals 6.1.1.3. MAC Control Interface Signals 6.1.1.4. MAC Status Signals 6.1.1.5. MAC Receive Interface Signals 6.1.1.6. MAC Transmit Interface Signals 6.1.1.7. Pause and Magic Packet Signals 6.1.1.8. MII/GMII/RGMII Signals 6.1.1.9. PHY Management Signals 6.1.1.10. ECC Status Signals
6.1.2. 10/100/1000 Multiport Ethernet MAC Signals x
6.1.2.1. Multiport MAC Clock and Reset Signals 6.1.2.2. Multiport MAC Receive Interface Signals 6.1.2.3. Multiport MAC Transmit Interface Signals 6.1.2.4. Multiport MAC Packet Classification Signals 6.1.2.5. Multiport MAC FIFO Status Signals
6.1.3. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS Signals x
6.1.3.1. TBI Interface Signals 6.1.3.2. Status LED Control Signals 6.1.3.3. SERDES Control Signals 6.1.3.4. ECC Status Signals
6.1.4. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII 2XTBI PCS and Embedded PMA Signals (E-Tile) x
6.1.4.1. GMII Clock Signals 6.1.4.2. E-Tile Transceiver Native PHY Signals
6.1.7. 10/100/1000 Ethernet MAC Without Internal FIFO Buffers with IEEE 1588v2, 1000BASE-X/SGMII 2XTBI PCS, SGMII Bridge, and Deterministic Latency Signals x
6.1.7.1. Deterministic Latency Clock Signals 6.1.7.2. Deterministic Latency Datapath Signals 6.1.7.3. Deterministic Latency Control and Status Interface Signals 6.1.7.4. Deterministic Latency Interface Signals 6.1.7.5. IEEE 1588v2 PCS TX PTP Alignment Interface Signals
6.1.9. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII TBI (LVDS I/O only) PCS Signals x
6.1.9.1. LVDS I/O Related Interface Signals
6.1.10. 10/100/1000 Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals x
6.1.10.1. 1.25 Gbps Serial Interface 6.1.10.2. Transceiver Native PHY Signal 6.1.10.3. Arria® 10 Transceiver Native PHY Signals 6.1.10.4. SERDES Control Signals 6.1.10.5. Altera LVDS Transmitter and Receiver Soft-CDR I/O Signals
6.1.11. 10/100/1000 Multiport Ethernet MAC with 1000BASE-X/SGMII PCS and Embedded PMA Signals x
6.1.11.1. IEEE 1588v2 RX Timestamp Signals 6.1.11.2. IEEE 1588v2 TX Timestamp Signals 6.1.11.3. IEEE 1588v2 TX Timestamp Request Signals 6.1.11.4. IEEE 1588v2 TX Insert Control Timestamp Signals 6.1.11.5. IEEE 1588v2 Time-of-Day (TOD) Clock Interface Signals 6.1.11.6. IEEE 1588v2 PCS Phase Measurement Clock Signal 6.1.11.7. IEEE 1588v2 PHY Path Delay Interface Signals
6.1.12. 1000BASE-X/SGMII PCS Signals x
6.1.12.1. PCS Control Interface Signals 6.1.12.2. PCS Reset Signals 6.1.12.3. MII/GMII Clocks and Clock Enablers 6.1.12.4. GMII 6.1.12.5. MII 6.1.12.6. SGMII Status Signals
6.1.13. 1000BASE-X/SGMII 2XTBI PCS Signals x
6.1.13.1. Clock Enablers 6.1.13.2. PCS Reset Signals 6.1.13.3. TBI Interface Signals
6.2. Timing x
6.2.1. Avalon Streaming Receive Interface 6.2.2. Avalon Streaming Transmit Interface 6.2.3. GMII Transmit 6.2.4. GMII Receive 6.2.5. RGMII Transmit 6.2.6. RGMII Receive 6.2.7. MII Transmit 6.2.8. MII Receive 6.2.9. IEEE 1588v2 Timestamp
7. Design Considerations x
7.1. Optimizing Clock Resources in Multiport MAC with PCS and Embedded PMA 7.2. Sharing PLLs in Devices with LVDS Soft-CDR I/O 7.3. Sharing PLLs in Devices with GIGE PHY 7.4. Sharing Transceiver Quads 7.5. Migrating From Old to New User Interface For Existing Designs 7.6. Clocking Scheme of MAC with 2XTBI PCS and Embedded PMA
7.1. Optimizing Clock Resources in Multiport MAC with PCS and Embedded PMA x
7.1.1. MAC and PCS With GX Transceivers 7.1.2. MAC and PCS With LVDS Soft-CDR I/O
7.5. Migrating From Old to New User Interface For Existing Designs x
7.5.1. Exposed Ports in the New User Interface
8. Timing Constraints x
8.1. Creating Clock Constraints 8.2. Recommended Clock Frequency
9. Testbench x
9.1. Triple-Speed Ethernet Testbench Architecture 9.2. Testbench Components 9.3. Testbench Verification 9.4. Testbench Configuration 9.5. Test Flow 9.6. Simulation Model
9.6. Simulation Model x
9.6.1. Generate the Simulation Model 9.6.2. Simulate the IP 9.6.3. Simulation Model Files
10. Software Programming Interface x
10.1. Driver Architecture 10.2. Directory Structure 10.3. PHY Definition 10.4. Using Multiple SG-DMA Descriptors 10.5. Using Jumbo Frames 10.6. API Functions 10.7. Constants
10.6. API Functions x
10.6.1. alt_tse_mac_get_common_speed() 10.6.2. alt_tse_mac_set_common_speed() 10.6.3. alt_tse_phy_add_profile() 10.6.4. alt_tse_system_add_sys() 10.6.5. triple_speed_ethernet_init() 10.6.6. tse_mac_close() 10.6.7. tse_mac_raw_send() 10.6.8. tse_mac_setGMII mode() 10.6.9. tse_mac_setMIImode() 10.6.10. tse_mac_SwReset()
A. Ethernet Frame Format x
A.1. Basic Frame Format A.2. VLAN and Stacked VLAN Frame Format A.3. Pause Frame Format
A.3. Pause Frame Format x
A.3.1. Pause Frame Generation
B. Simulation Parameters x
B.1. Functionality Configuration Parameters B.2. Test Configuration Parameters
1. About This IP
2. Getting Started with Altera IPs
3. Parameter Settings
4. Functional Description
5. Configuration Register Space
6. Interface Signals
7. Design Considerations
8. Timing Constraints
9. Testbench
10. Software Programming Interface
11. Triple-Speed Ethernet Intel® FPGA IP User Guide Archives
12. Document Revision History for the Triple-Speed Ethernet Intel® FPGA IP User Guide
A. Ethernet Frame Format
B. Simulation Parameters

6.1.1.5. MAC Receive Interface Signals

Table 60.  MAC Receive Interface Signals
Name Avalon Streaming 
Signal Type I/O Description
Avalon Streaming Signals
ff_rx_clk

(In Platform Designer: receive_clock_connection)

clk I Receive clock. All signals on the Avalon streaming receive interface are synchronized on the rising edge of this clock. Set this clock to the frequency required to get the desired bandwidth on this interface. This clock can be completely independent from rx_clk.
ff_rx_dval valid O Receive data valid. When asserted, this signal indicates that the data on the following signals are valid: ff_rx_data[(DATAWIDTH -1):0], ff_rx_sop, ff_rx_eop, rx_err[5:0], rx_frm_type[3:0], and rx_err_stat[17:0].
ff_rx_data
[(DATAWIDTH-1):0] data O Receive data. When DATAWIDTH is 32, the first byte received is ff_rx_data[31:24] followed by ff_rx_data[23:16] and so forth.
ff_rx_mod[1:0] empty O Receive data modulo. Indicates invalid bytes in the final frame word:
  • 11: ff_rx_data[23:0] is not valid
  • 10: ff_rx_data[15:0] is not valid
  • 01: ff_rx_data[7:0] is not valid
  • 00: ff_rx_data[31:0] is valid

This signal applies only when DATAWIDTH is set to 32.

ff_rx_sop startofpacket O Receive start of packet. Asserted when the first byte or word of a frame is driven on ff_rx_data[(DATAWIDTH-1):0].
ff_rx_eop endofpacket O Receive end of packet. Asserted when the last byte or word of frame data is driven on ff_rx_data[(DATAWIDTH-1):0].
ff_rx_rdy ready I Receive application ready. Assert this signal on the rising edge of ff_rx_clk when the user application is ready to receive data from the MAC function.
rx_err[5:0] error O Receive error. Asserted with the final byte in the frame to indicate that an error was detected when receiving the frame. See rx_err Bit Description for the bit description.
Component-Specific Signals
ff_rx_dsav — O Receive frame available. When asserted, this signal indicates that the internal receive FIFO buffer contains some data to be read but not necessarily a complete frame. The user application may want to start reading from the FIFO buffer.

This signal remains deasserted in the store and forward mode.

rx_frm_type[3:0] — O Frame type. See rx_frm_type Bit Description for the bit description.
ff_rx_a_full — O Asserted when the FIFO buffer reaches the almost-full threshold.
ff_rx_a_empty — O Asserted when the FIFO buffer goes below the almost-empty threshold.
rx_err_stat[17:0] — O rx_err_stat[17]: One indicates that the receive frame is a stacked VLAN frame.

rx_err_stat[16]: One indicates that the receive frame is either a VLAN or stacked VLAN frame.

rx_err_stat[15:0]: The value of the length/type field of the receive frame.

Table 61.   rx_frm_type Bit Description
Bit Description
3 Indicates VLAN frames. Asserted with ff_rx_sop and remains asserted until the end of the frame.
2 Indicates broadcast frames. Asserted with ff_rx_sop and remains asserted until the end of the frame.
1 Indicates multicast frames. Asserted with ff_rx_sop and remains asserted until the end of the frame.
0 Indicates unicast frames. Asserted with ff_rx_sop and remains asserted until the end of the frame.
Table 62.  rx_err Bit Description
Bit Description
5 Collision error. Asserted when the frame was received with a collision.
4 Corrupted receive frame caused by PHY or PCS error. Asserted when the error is detected on the MII/GMII/RGMII.
3 Truncated receive frame. Asserted when the receive frame is truncated due to an overflow in the receive FIFO buffer.
2 17 CRC error. Asserted when the frame is received with a CRC-32 error. This error bit applies only to frames with a valid length. Refer to Length Checking.
1 17 Invalid length error. Asserted when the receive frame has an invalid length as defined by the IEEE Standard 802.3. For more information on the frame length, refer to Length Checking.
0 Receive frame error. Indicates that an error has occurred. It is the logical OR of rx_err[5:1].
17 Bits 1 and 2 are not mutually exclusive. Ignore CRC error rx_err[2] signal if it is asserted at the same time as the invalid length error rx_err[1] signal.
Level Two Title