F-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* Design Example User Guide

Download PDF
ID 683372
Date 10/07/2024
Public
Document Table of Contents
Document Table of Contents x
1. Acronyms 2. Design Example Description 3. Quick Start Guide 4. F-Tile Avalon Streaming Intel FPGA IP for PCI Express Design Example User Guide Archives 5. Revision History for the F-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* Design Example User Guide
2. Design Example Description x
2.1. Programmed Input/Output Design Example 2.2. Single Root I/O Virtualization (SR-IOV) Design Example 2.3. Performance Design Example
2.1. Programmed Input/Output Design Example x
2.1.1. Programmed Input/Output Design Example Functional Description 2.1.2. Programmed Input/Output Design Example Limitation 2.1.3. Programmed Input/Output Design Example Simulation Testbench
2.1.1. Programmed Input/Output Design Example Functional Description x
2.1.1.1. F-Tile Avalon-ST IP for PCI Express Hard IP (DUT) 2.1.1.2. PIO Design Example for PCI Express G4 2.1.1.3. On-Chip Memory (MEM) 2.1.1.4. F-Tile Reference and System PLL Clocks IP 2.1.1.5. Reset Release IP
2.1.1.2. PIO Design Example for PCI Express G4 x
2.1.1.2.1. Scheduler 2.1.1.2.2. Read Write Module 2.1.1.2.3. Avalon-MM Interface 2.1.1.2.4. Completion Module 2.1.1.2.5. Width Adapter
2.2. Single Root I/O Virtualization (SR-IOV) Design Example x
2.2.1. Single Root I/O Virtualization (SR-IOV) Design Example Functional Description 2.2.2. SR-IOV Design Example Limitation 2.2.3. Single Root I/O Virtualization (SR-IOV) Design Example Simulation Testbench
2.2.1. Single Root I/O Virtualization (SR-IOV) Design Example Functional Description x
2.2.1.1. F-Tile Avalon-ST IP for PCI Express Hard IP (DUT) 2.2.1.2. F-Tile Avalon-ST SR-IOV Example Design
2.2.1.2. F-Tile Avalon-ST SR-IOV Example Design x
2.2.1.2.1. Access Parser 2.2.1.2.2. Access Router 2.2.1.2.3. Completion 2.2.1.2.4. PF Segram 2.2.1.2.5. VF Segram 2.2.1.2.6. F-Tile Reference and System PLL Clocks IP 2.2.1.2.7. Reset Release IP
2.3. Performance Design Example x
2.3.1. Performance Design Example Functional Description 2.3.2. Performance Design Example Simulation Testbench
3. Quick Start Guide x
3.1. Directory Structure 3.2. Generating the Design Example 3.3. Simulating the Design Example 3.4. Compiling the Design Example 3.5. Hardware and Software Requirements 3.6. Installing the Linux Kernel Driver 3.7. Running the Design Example
3.3. Simulating the Design Example x
3.3.1. Steps to Run Simulation 3.3.2. Testbench
3.3.1. Steps to Run Simulation x
3.3.1.1. Steps to Run Simulation : VCS* 3.3.1.2. Steps to Run Simulation : VCS* MX 3.3.1.3. Steps to Run Simulation : Questa* 3.3.1.4. Steps to Run Simulation : Xcelium* 3.3.1.5. Steps to Run Simulation : Riviera-PRO*
3.3.2. Testbench x
3.3.2.1. Test Driver Module 3.3.2.2. PIO Design Example Testbench 3.3.2.3. SR-IOV Design Example Testbench 3.3.2.4. Performance Design Example Testbench
3.7. Running the Design Example x
3.7.1. Running the PIO Design Example 3.7.2. Running the SR-IOV Design Example 3.7.3. Running the Performance Design Example
1. Acronyms
2. Design Example Description
3. Quick Start Guide
4. F-Tile Avalon Streaming Intel FPGA IP for PCI Express Design Example User Guide Archives
5. Revision History for the F-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* Design Example User Guide

3.6. Installing the Linux Kernel Driver

Before you can test the design example in hardware, you must configure the FPGA and then restart your computer to allow the enumerate to take place for the PCIe device. After that, install the Linux kernel driver. You can use this driver to perform the following tests:
  • A PCIe link test that performs 100 writes and reads
  • Memory space DWORD(1) reads and writes
  • Configuration Space DWORD reads and writes
Note: Throughout this user guide, the term word DWORD has the same meaning as in the PCI Express Base Specification. A word is 16 bits and a DWORD is 32 bits.
In addition, you can use the driver to change the value of the following parameters:
  • The BAR being used
  • The selected device (by specifying the bus, device and function (BDF) numbers for the device)

Complete the following steps to install the kernel driver

  1. Navigate to ./software/kernel/linux under the example design generation directory.
  2. Change the permissions on the install, load, and unload files
    $ chmod 777 install load unload
  3. Install the driver
    $ sudo ./install
  4. Verify the driver installation
    $ lsmod | grep intel_fpga_pcie_drv
    Expected Result 
    intel_fpga_pcie_drv 17792 0
  5. Verify that Linux recognizes the PCIe design example
    $ lspci -d 1172:000 -v | grep intel_fpga_pcie_drv
    Expected result. Kernel driver in use: 
    intel_fpga_pcie_drv
    Note: If you have changed the Vendor ID, substitute the new Vendor ID for Intel's Vendor ID in this command.
Level Two Title