JESD204B Intel® Cyclone® 10 GX FPGA IP Design Example User Guide

Download PDF
ID 683298
Date 7/29/2024
Public
Document Table of Contents
Document Table of Contents x
1. JESD204B Intel® Cyclone® 10 GX FPGA IP Design Example User Guide
1. JESD204B Intel® Cyclone® 10 GX FPGA IP Design Example User Guide x
1.1. JESD204B Intel® Cyclone® 10 GX FPGA IP Design Example Quick Start Guide 1.2. Design Example Detailed Description 1.3. JESD204B Cyclone® 10 GX FPGA IP Design Example User Guide Archives 1.4. Document Revision History for the JESD204B Intel® Cyclone® 10 GX FPGA IP Design Example User Guide
1.1. JESD204B Intel® Cyclone® 10 GX FPGA IP Design Example Quick Start Guide x
1.1.1. Directory Structure 1.1.2. Generating the Design 1.1.3. Simulating the Design 1.1.4. Compiling and Testing the Design
1.1.2. Generating the Design x
1.1.2.1. Design Example Parameters
1.1.4. Compiling and Testing the Design x
1.1.4.1. Board Connectivity 1.1.4.2. Hardware Test for System Console Control Design Example
1.2. Design Example Detailed Description x
1.2.1. Features 1.2.2. Hardware and Software Requirements 1.2.3. Supported Configurations 1.2.4. Presets 1.2.5. Design Components 1.2.6. Clocking Scheme 1.2.7. Simulation 1.2.8. Design Example Files 1.2.9. Registers 1.2.10. Signals 1.2.11. Customizing the Design Example
1.2.5. Design Components x
1.2.5.1. Platform Designer System Component 1.2.5.2. Transport Layer 1.2.5.3. Test Pattern Generator 1.2.5.4. Test Pattern Checker
1.2.5.1. Platform Designer System Component x
1.2.5.1.1. JESD204B Subsystem in Platform Designer 1.2.5.1.2. Parallel I/O 1.2.5.1.3. ATX PLL 1.2.5.1.4. Core PLL 1.2.5.1.5. SPI Master
1.2.7. Simulation x
1.2.7.1. Testbench
1.2.11. Customizing the Design Example x
1.2.11.1. Modifying the JESD204B IP Core Parameters 1.2.11.2. Changing the Data Rate or Reference Clock Frequency
1. JESD204B Intel® Cyclone® 10 GX FPGA IP Design Example User Guide

1.2.10. Signals

Table 19.  System Interface Signals
Signal Clock Domain Direction Description
Clocks and Resets
mgmt_clk — Input

Reference clock for all peripherals connected via Avalon® memory-mapped interconnect.

global_rst_n mgmt_clk Input

Global reset signal from the push button. This reset is an active low signal and the deassertion of this signal is synchronous to the rising-edge of mgmt_clk.

Signal

Clock Domain

Direction

Description

Serial Data
rx_serial_data[LINK*L-1:0] device_clk Input

Differential high speed serial input data. The clock is recovered from the serial data stream.

tx_serial_data[LINK*L-1:0] device_clk Output

Differential high speed serial output data. The clock is embedded in the serial data stream.

Signal

Clock Domain

Direction

Description

JESD204B
sysref_out mgmt_clk Output

SYSREF signal for JESD204B Subclass 1 implementation.

sync_n_out link_clk Output

Indicates a SYNC_N from the receiver. This is an active low signal and is asserted 0 to indicate a synchronization request or error reporting.

tx_link_error link_clk Output Error interrupt from JESD204B IP core indicating TX link error
rx_link_error link_clk Output Error interrupt from JESD204B IP core indicating RX link error

Signal

Clock Domain

Direction

Description

Avalon® Streaming User Data
avst_usr_din[LINK*TL_DATA_BUS_WIDTH-1:0] frame_clk Input TX data from the Avalon® streaming source interface. The TL_DATA_BUS_WIDTH is determined by the following formulas:
  • If F = 1, TL_DATA_BUS_WIDTH = F1_FRAMECLK_DIV*8*1*L*N/N_PRIME
  • If F = 2, TL_DATA_BUS_WIDTH = F2_FRAMECLK_DIV*8*2*L*N/N_PRIME
  • If F = 4, TL_DATA_BUS_WIDTH = 8*4*L*N/N_PRIME
  • If F = 8, TL_DATA_BUS_WIDTH = 8*8*L*N/N_PRIME
avst_usr_din_valid[LINK-1:0] frame_clk Input

Indicates whether the data from the Avalon® streaming source interface to the transport layer is valid or invalid.

  • 0—data is invalid
  • 1—data is valid
avst_usr_din_ready[LINK-1:0] frame_clk Output

Indicates that the transport layer is ready to accept data from the Avalon® streaming source interface.

  • 0—transport layer is not ready to receive data
  • 1—transport layer is ready to receive data
avst_usr_dout[LINK*TL_DATA_BUS_WIDTH-1:0] frame_clk Output RX data to the Avalon® streaming sink interface. The TL_DATA_BUS_WIDTH is determined by the following formulas:
  • If F = 1, TL_DATA_BUS_WIDTH = F1_FRAMECLK_DIV*8*1*L*N/N_PRIME
  • If F = 2, TL_DATA_BUS_WIDTH = F2_FRAMECLK_DIV*8*2*L*N/N_PRIME
  • If F = 4, TL_DATA_BUS_WIDTH = 8*4*L*N/N_PRIME
  • If F = 8, TL_DATA_BUS_WIDTH = 8*8*L*N/N_PRIME
avst_usr_dout_valid[LINK-1:0] frame_clk Output

Indicates whether the data from the transport layer to the Avalon® streaming sink interface is valid or invalid.

  • 0—data is invalid
  • 1—data is valid
avst_usr_dout_ready[LINK-1:0] frame_clk Input

Indicates that the Avalon® streaming sink interface is ready to accept data from the transport layer.

  • 0— Avalon® streaming sink interface is not ready to receive data
  • 1— Avalon® streaming sink interface is ready to receive data
avst_patchk_data_error [LINK-1:0] frame_clk Output

Output signal from pattern checker indicating a pattern check error.

Signal

Clock Domain

Direction

Description

SPI
spi_MISO 5 spi_SCLK Input

Input data from external slave to the master.

spi_MOSI 5 spi_SCLK Output

Output data from the master to the external slaves.

spi_SDIO 6 spi_SCLK Input/Output Output data from the master to external slave. Input data from external slave to master
spi_SCLK mgmt_clk Output

Clock driven by the master to slaves, to synchronize the data bits.

spi_SS_n[2:0] spi_SCLK Output

Active low select signal driven by the master to individual slaves, to select the target slave. Defaults to 3 bits.

5 When Generate 3-Wire SPI Module option is not enabled.
6 When Generate 3-Wire SPI Module option enabled.
Level Two Title